Everything was burning just fine up until 2-3 weeks ago. I don't remember changing anything on my PC at all. The error says "A Reset Occurred" I updated the firmware and still get the same error. I'm using Verbatim DVD+R media and have been using this for about a year now...........Please Help Me!!! Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 8/14/2002 3:03:36 PM ahead WinASPI: File 'Crogram FilesAhead eroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 6/17/2003 8:25:03 AM Nero version: 6.0.0.13 Recorder: <SONY DVD RW DRU-500A> Version: 2.1a - HA 1 TA 1 - 6.0.0.13 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HITACHI DVD-ROM GD-2500 >Version: 0101 - HA 1 TA 0 - 6.0.0.13 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 0 DMA: On DiskPeripheral : IC35L080AVVA07-0 atapi Port 0 ID 1 DMA: On CdRomPeripheral : HITACHI DVD-ROM GD-2500 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : SONY DVD RW DRU-500A atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HITACHI DVD-ROM GD-2500 E: CDRom0 SONY DVD RW DRU-500A F: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 232MB (238500kB) Memory in use : 54 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.7.2004 UDF/ISO compilation 7:57:37 AM #1 Phase 112 File dlgbrnst.cpp, Line 1843 DVD-Video files reallocation started 7:57:37 AM #2 Phase 114 File dlgbrnst.cpp, Line 1843 DVD-Video files reallocation completed (no file modified) 7:57:37 AM #3 Text 0 File Isodoc.cpp, Line 5805 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:57:37 AM #4 Phase 111 File dlgbrnst.cpp, Line 1843 DVD-Video files sorted 7:57:37 AM #5 Text 0 File Reader.cpp, Line 118 Reader running 7:57:37 AM #6 Text 0 File Writer.cpp, Line 127 Writer SONY DVD RW DRU-500A running 7:57:37 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3854 First writeable address = 0 (0x00000000) 7:57:37 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3854 First writeable address = 0 (0x00000000) 7:57:37 AM #9 Text 0 File Burncd.cpp, Line 3176 Turn on Disc-at-once, using DVD media 7:57:38 AM #10 Text 0 File DlgWaitCD.cpp, Line 228 Last possible write address on media: 2295103 (510:01.28) Last address to be written: 2189375 (486:31.50) 7:57:38 AM #11 Text 0 File DlgWaitCD.cpp, Line 233 Write in overburning mode: FALSE 7:57:38 AM #12 Text 0 File DlgWaitCD.cpp, Line 1722 Recorder: SONY DVD RW DRU-500A, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R00, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 0 7:57:38 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 769 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2189376 (2189376) = #2189376/486:31.51 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2189376 blocks [SONY DVD RW DRU-500A ] -------------------------------------------------------------- 7:57:39 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 938 Prepare recorder [SONY DVD RW DRU-500A ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 4484149248, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2189376 | lead-out | 1 | 0x00 | 0x41 7:57:39 AM #15 Phase 24 File dlgbrnst.cpp, Line 1843 Caching of files started 7:57:39 AM #16 Phase 25 File dlgbrnst.cpp, Line 1843 Caching of files completed 7:57:39 AM #17 Phase 36 File dlgbrnst.cpp, Line 1843 Burn process started at 2.4x (3,312 KB/s) 7:57:39 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2136 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:57:39 AM #19 Text 0 File Cdrdrv.cpp, Line 7906 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 00 52 49 43 4F 48 4A - 50 4E 52 30 30 01 38 23 ..RICOHJPNR00.8# 54 37 0C 00 50 6C 00 C8 - 66 16 18 0B 0B 0A 0B 01 T7..Pl..f....... 19 1B 0B 0B 0E 0F 01 00 - 00 00 00 00 00 00 00 00 ................ 7:57:39 AM #20 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 22:52,845 (1372845ms) -> OK 7:57:39 AM #21 Text 0 File DVDPlusRW.cpp, Line 560 Start write address at LBA 0 DVD high compatibility mode: Yes 8:03:02 AM #22 SCSI -1114 File Cdrdrv.cpp, Line 1415 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02B35000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x29 0x00 8:08:44 AM #23 SCSI -1114 File Cdrdrv.cpp, Line 1415 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02B35000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x29 0x00 8:11:24 AM #24 SCSI -1114 File Cdrdrv.cpp, Line 1415 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02B35000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x29 0x00 8:13:46 AM #25 SCSI -1114 File Cdrdrv.cpp, Line 1415 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02B35000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x29 0x00 8:13:54 AM #26 SCSI -1064 File Cdrdrv.cpp, Line 1415 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x02ED0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x21 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x18 0x8D 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x21 0x02 8:13:54 AM #27 CDR -1114 File Writer.cpp, Line 335 Reset occurred SONY DVD RW DRU-500AH1 T1 8:13:54 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:13:54 AM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 8:14:20 AM #30 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 8:14:20 AM #31 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 8:14:20 AM #32 Phase 38 File dlgbrnst.cpp, Line 1843 Burn process failed at 2.4x (3,312 KB/s) Existing drivers: File 'DriversASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 8/14/2002 3:03:36 PM File 'Driversatapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 3:27:50 AM (Adapter driver for rec) Registry Keys: HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option)
Hi, Check conditions and resets are usually cause by a communication error between the drive and the system. Are all your cables seated properly and in good condition? Are you multitasking while the rip/burn process is going? Is your Sony set to Master on the IDE chain? Do you have Nero's InCD installed? Are you positive you didn't make any hardware/software changes recently? It's strange that this problem cropped up all of the sudden.
You're also running a very old version of Nero that was known to be buggy and update would be a very good thing
