I installed the pin header for the aladdin xtreme. Soldered the chip to the header. Installed the 5 wires for rebuild. Soldered in the bt and l1. Put it all back together and xbox wouldnt power up. So I solderd the do point to the x point on the chip. It will start the turn off. Then it will start and turn off again. Then the third time it turns on with no video audio and the eject buttons is flashing green. The chips blue led is solid so it is in right. Please help me. Thanks, Cory
The only thing the blue light on the modchip tells you is that it is getting a 5v connection from pin 9 on the pinheader. I guarantee that there is something wrong w/ your install, because 99% of the time your Xbox will do the 3x reboot after a failed mod install. Go back over all of your points, and make sure everything is connected as solid as possible. Check your rebuild points especially, and make sure you are getting good connections on them. Try following through this great guide: http://www.hackdabox.com/Aladdin_Install.html
