Atin ajurit toimimaan @ Fedora core 3

Discussion in 'Linux -keskustelu' started by Punaparta, Apr 5, 2005.

  1. Punaparta

    Punaparta Regular member

    Joined:
    Dec 17, 2004
    Messages:
    102
    Likes Received:
    0
    Trophy Points:
    26
    Juu taas näitä aloittelijoiden onkkelmia.
    Pitäisi siis saada Atin 9600 ratikka toimimaan kunnolla(?)

    http://www.fedorafaq.org/#radeon
    Tuollaiset ohjeet löytyi googlella,
    mutta ovat [bold]erittäin[/bold] epävakaat.
    Testasin glxgears komennolla ja tuli jotain
    280-350 fps.
    Eli jos taas joltain löytyy viitseliäisyyttä
    vääntää oiken rautalangasta ohjeet
    niin olisi suuuuuri apu :)
     
    Punaparta, Apr 5, 2005
    #1
  2. juppe22

    juppe22 Active member

    Joined:
    May 27, 2002
    Messages:
    2,660
    Likes Received:
    0
    Trophy Points:
    66
    Last edited: Apr 5, 2005
    juppe22, Apr 5, 2005
    #2
  3. Punaparta

    Punaparta Regular member

    Joined:
    Dec 17, 2004
    Messages:
    102
    Likes Received:
    0
    Trophy Points:
    26
    Nyt ehkä selvis mikä on ongelmana.

    Taitaa toimia pci väylässä noi ajurit :)
    Varmaan editoimalla X konffeja ratkee ongelma...
    Katsotaan lähteekö X vielä kohta käyntiin.
     
    Punaparta, Apr 5, 2005
    #3
  4. Punaparta

    Punaparta Regular member

    Joined:
    Dec 17, 2004
    Messages:
    102
    Likes Received:
    0
    Trophy Points:
    26
    Jeps eli "transfer mode" onpi PCI (!)
    Yritin sorvailla noita X konffiloita mutta,
    eipä onnistunut.
    Tv-out tosin jekittää hienosti.

    # Xorg configuration created by system-config-display

    Section "ServerLayout"
    Identifier "single head configuration"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection

    Section "Files"

    # RgbPath is the location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # Multiple FontPath entries are allowed (they are concatenated together)
    # By default, Red Hat 6.0 and later now use a font server independent of
    # the X server to render fonts.
    RgbPath "/usr/X11R6/lib/X11/rgb"
    FontPath "unix/:7100"
    EndSection

    Section "Module"
    Load "dbe"
    Load "extmod"
    Load "fbdevhw"
    Load "glx"
    Load "record"
    Load "freetype"
    Load "type1"
    Load "dri"
    EndSection

    Section "InputDevice"

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # To disable the XKEYBOARD extension, uncomment XkbDisable.
    # Option "XkbDisable"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # Or if you just want both to be control, use:
    # Option "XkbOptions" "ctrl:nocaps"
    #
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "fi"
    EndSection

    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "IMPS/2"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5"
    Option "Emulate3Buttons" "yes"
    EndSection

    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "MAG DX1795"
    DisplaySize 300 220
    HorizSync 30.0 - 64.0
    VertRefresh 50.0 - 120.0
    Option "dpms"
    EndSection

    Section "Device"
    Identifier "Videocard0"
    Driver "fglrx"
    VendorName "Videocard vendor"
    BoardName "ATI Radeon 9600"
    Option "VideoOverlay" "on"
    EndSection

    Section "Screen"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection

    Section "DRI"
    Group 0
    Mode 0666
    EndSection


    [bold] Edit:[/bold]
    laitoin tuon xorg.configin listauksen.
     
    Last edited: Apr 5, 2005
    Punaparta, Apr 5, 2005
    #4

Share This Page