I haven't burned a DVD in awhile, and I recently went to do so. However, the buffer remained at zero. I decided to go update my drivers, but it didn't help. I don't have a lot of experience trouble shooting dvd burners, as I have never encountered a problem. I was using Nero and my OS is XP. Any help is greatly appreciated. Here is the Error Log: Nero 8.3.6.0 Ahead Software Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.3.6.0 Internal Version: 8, 3, 6, 0 Recorder: <PLEXTOR DVDR PX-716A> Version: 1.11 - HA 1 TA 0 - 8.3.6.0 Adapter driver: <IDE> HA 1 Drive buffer : 8192kB Bus Type : default CD-ROM: <PLEXTOR DVDR PX-716A >Version: 1.11 - HA 1 TA 0 - 8.3.6.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST3160021A atapi Port 0 ID 1 DMA: On CdRomPeripheral : PLEXTOR DVDR PX-716A atapi Port 1 ID 0 DMA: On CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off === CDRom-Device-Map === PLEXTOR DVDR PX-716A D: CdRom0 MagicISO Virtual DVD-ROM E: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1535MB (1572336kB) Free physical memory: 1045MB (1070460kB) Memory in use : 31 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.11.2008 Burn DVD Image 9:47:34 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 9:47:34 PM #2 Text 0 File Burncd.cpp, Line 3568 Turn on Disc-At-Once, using DVD media 9:47:34 PM #3 Text 0 File DlgWaitCD.cpp, Line 311 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 635855 (141:18.05, 1241MB) 9:47:34 PM #4 Text 0 File DlgWaitCD.cpp, Line 323 Write in overburning mode: NO (enabled: CD) 9:47:34 PM #5 Text 0 File DlgWaitCD.cpp, Line 2948 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R Disc Manufacturer ID: <RITEK>, Media Type ID: <F16>, Product revision number: 1 Disc Application Code: 0, Extended Information Indicators: 7 9:47:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 497 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:47:34 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 754 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 635856 (635856) = #635856/141:18.6 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 635856 blocks [D: PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 9:47:34 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 956 Prepare [D: PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1302233088, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 635856 | 635856 | 0x00 635856 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 9:47:35 PM #9 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 9:47:35 PM #10 Text 0 File Burncd.cpp, Line 4359 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 9:47:35 PM #11 Phase 24 File dlgbrnst.cpp, Line 1767 Caching of files started 9:47:35 PM #12 Text 0 File Burncd.cpp, Line 4481 Cache writing successful. 9:47:35 PM #13 Phase 25 File dlgbrnst.cpp, Line 1767 Caching of files completed 9:47:35 PM #14 Phase 36 File dlgbrnst.cpp, Line 1767 Burn process started at 16x (22,160 KB/s) 9:47:35 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2673 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:47:35 PM #16 Text 0 File Cdrdrv.cpp, Line 10187 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Transfer Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RITEK... Media type ID: F16 Product revision number: 1 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..259]: 00 00 07 52 49 54 45 4B - 00 00 00 46 31 36 01 38 ...RITEK...F16.8 23 54 37 12 02 50 6E 02 - 8C 68 16 16 0B 0B 0A 0A #T7..Pn..h...... 01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................ 01 00 38 38 02 2D 62 1E - 08 2E 23 10 04 1E 1D 01 ..88.-b...#..... 00 00 02 2D 62 1E 08 2E - 23 10 04 1E 1D 01 00 00 ...-b...#....... 02 00 54 70 02 38 64 24 - 30 18 10 10 01 20 00 00 ..Tp.8d$0....... 00 00 02 48 60 2A 30 18 - 10 10 01 20 00 00 00 28 ...H`*0........( 03 00 54 E0 02 41 64 24 - 30 18 10 10 01 28 00 00 ..T..Ad$0....(.. 00 00 02 AF 5B 3E 30 18 - 10 10 01 28 00 00 00 5A ....[>0....(...Z 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 ................ 9:47:35 PM #17 Text 0 File DVDR.cpp, Line 6983 Drive: PLEXTOR DVDR PX-716A Book Type request [PX]: DVD-ROM Changing the Book Type was finished successfully, return code 0 9:47:35 PM #18 CDR -1207 File DVDR.cpp, Line 6627 Book Type automatically set to: DVD-ROM 9:47:35 PM #19 Text 0 File DVDPlusRW.cpp, Line 675 Start write address at LBA 0 DVD high compatibility mode: Yes 9:47:35 PM #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 9:47:37 PM #21 Text 0 File Cdrdrv.cpp, Line 1411 21:47:37.015 - D: PLEXTOR DVDR PX-716A : Queue again later 9:47:54 PM #22 SPTI -1106 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00 Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x00000000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9:47:54 PM #23 CDR -1106 File Writer.cpp, Line 306 Power calibration error D: PLEXTOR DVDR PX-716A 9:47:59 PM #24 SPTI -1176 File SCSIPassThrough.cpp, Line 214 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 9:47:59 PM #25 Phase 127 File dlgbrnst.cpp, Line 1767 Generating DVD high compatibility borders 9:48:00 PM #26 Text 0 File DVDPlusRW.cpp, Line 943 EndDAO: Last written address 32 9:48:00 PM #27 Text 0 File DVDR.cpp, Line 6983 Drive: PLEXTOR DVDR PX-716A Book Type request [PX]: DVD-ROM Changing the Book Type was finished successfully, return code 0 9:48:00 PM #28 CDR -1176 File WriterStatus.cpp, Line 292 Session fixation error D: PLEXTOR DVDR PX-716A 9:48:00 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 292 Could not perform end of Disc-at-once 9:48:00 PM #30 Phase 38 File dlgbrnst.cpp, Line 1767 Burn process failed at 16x (22,160 KB/s) 9:48:01 PM #31 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 9:48:03 PM #32 Text 0 File Cdrdrv.cpp, Line 11450 DriveLocker: UnLockVolume completed 9:48:03 PM #33 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
