Burn process failed (Please help a noob!)

Discussion in 'Nero discussion' started by peev34, Aug 30, 2005.

  1. peev34

    peev34 Member

    Joined:
    Oct 7, 2004
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    OK, I have been using NeroVision to create DVDs for nearly a year with no issues. I have used all kinds of media (including the Maxell used here, and Memorex, HP, etc) without any problems. Suddenly, I cannot get anything to burn correctly on my HP 530r drive!! I have the latest firmware, so I know that isn't the problem.

    I get all the way to the burning process without issue, then after a acouple of minutes, my disc spits out and I get the failure message.

    I can however, complete the buring process on my Samsumg TS-H542A, but ofr some reason, it won't go any faster than for 4X.


    Here is the **EDITED** error log for the HP 530r. Thanks in advance for any help!!




    [03:37:28] NeroVision Windows XP 5.1
    [03:37:28] NeroVision IA32
    [03:37:28] NeroVision WinAspi: -
    [03:37:28] NeroVision ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
    [03:37:28] NeroVision Nero API version: 6.6.0.16
    [03:37:28] NeroVision Using interface version: 6.6.0.10
    [03:37:28] NeroVision Installed in: C:\Program Files\Ahead\Nero\
    [03:37:28] NeroVision Application: ahead\NeroVision
    [03:37:28] NeroVision Internal Version: 6, 6, 0, 16b
    [03:37:28] NeroVision Recorder: <HP DVD Writer 530r> Version: VPSG - HA 0 TA 0 - 6.6.0.16
    [03:37:28] NeroVision Adapter driver: <atapi> HA 0
    [03:37:28] NeroVision Drive buffer : 2048kB
    [03:37:28] NeroVision Bus Type : default (0) -> ATAPI, detected: ATAPI
    [03:37:28] NeroVision === Scsi-Device-Map ===
    [03:37:28] NeroVision CdRomPeripheral : HP DVD Writer 530r atapi Port 0 ID 0 DMA: On
    [03:37:28] NeroVision CdRomPeripheral : TSSTcorp CD/DVDW TS-H542A atapi Port 0 ID 1 DMA: On
    [03:37:28] NeroVision DiskPeripheral : ST3160023AS atapi Port 1 ID 0 DMA: On
    [03:37:28] NeroVision DiskPeripheral : Maxtor 6Y160M0 atapi Port 1 ID 1 DMA: On
    [03:37:28] NeroVision === CDRom-Device-Map ===
    [03:37:28] NeroVision HP DVD Writer 530r E: CDRom0
    [03:37:28] NeroVision TSSTcorp CD/DVDW TS-H542A F: CDRom1
    [03:37:28] NeroVision =======================
    [03:37:28] NeroVision AutoRun : 1
    [03:37:28] NeroVision Excluded drive IDs:
    [03:37:28] NeroVision WriteBufferSize: 83886080 (0) Byte
    [03:37:28] NeroVision ShowDrvBufStat : 0
    [03:37:28] NeroVision BUFE : 0
    [03:37:28] NeroVision Physical memory : 1022MB (1046604kB)
    [03:37:28] NeroVision Free physical memory: 422MB (432256kB)
    [03:37:28] NeroVision Memory in use : 58 %
    [03:37:28] NeroVision Uncached PFiles: 0x0
    [03:37:28] NeroVision Use Inquiry : 1
    [03:37:28] NeroVision Global Bus Type: default (0)
    [03:37:28] NeroVision Check supported media : Disabled (0)
    [03:37:28] NeroVision 30.8.2005
    [03:37:28] NeroVision NeroAPI
    [03:37:28] NeroVision 3:33:34 AM #1 Phase 111 File APIProgress.cpp, Line 276
    [03:37:28] NeroVision DVD-Video files sorted
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #2 Text 0 File Reader.cpp, Line 127
    [03:37:28] NeroVision Reader running
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #3 Text 0 File Writer.cpp, Line 122
    [03:37:28] NeroVision Writer HP DVD Writer 530r running
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
    [03:37:28] NeroVision First writeable address = 0 (0x00000000)
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
    [03:37:28] NeroVision First writeable address = 0 (0x00000000)
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #6 Text 0 File Burncd.cpp, Line 3233
    [03:37:28] NeroVision Turn on Disc-At-Once, using DVD media
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #7 Text 0 File DlgWaitCD.cpp, Line 270
    [03:37:28] NeroVision Last possible write address on media: 2298495 (510:46.45, 4489MB)
    [03:37:28] NeroVision Last address to be written: 2013887 (447:31.62, 3933MB)
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #8 Text 0 File DlgWaitCD.cpp, Line 282
    [03:37:28] NeroVision Write in overburning mode: NO (enabled: CD)
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #9 Text 0 File DlgWaitCD.cpp, Line 2483
    [03:37:28] NeroVision Recorder: HP DVD Writer 530r, Media type: DVD-R
    [03:37:28] NeroVision Disc Manufacturer: RITEKG - 05
    [03:37:28] NeroVision Disc Application Code: 64, Disc Physical Code: 193
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #10 Text 0 File DlgWaitCD.cpp, Line 448
    [03:37:28] NeroVision >>> Protocol of DlgWaitCD activities: <<<
    [03:37:28] NeroVision =========================================
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
    [03:37:28] NeroVision Setup items (after recorder preparation)
    [03:37:28] NeroVision 0: TRM_DATA_MODE1 ()
    [03:37:28] NeroVision 2 indices, index0 (150) not provided
    [03:37:28] NeroVision original disc pos #0 + 2013888 (2013888) = #2013888/447:31.63
    [03:37:28] NeroVision relocatable, disc pos for caching/writing not required/ required, no patch infos
    [03:37:28] NeroVision -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2013888 blocks [HP DVD Writer 530r]
    [03:37:28] NeroVision --------------------------------------------------------------
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:35 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
    [03:37:28] NeroVision Prepare recorder [HP DVD Writer 530r] for write in CUE-sheet-DAO
    [03:37:28] NeroVision DAO infos:
    [03:37:28] NeroVision ==========
    [03:37:28] NeroVision MCN: ""
    [03:37:28] NeroVision TOCType: 0x00; Session Closed, disc fixated
    [03:37:28] NeroVision Tracks 1 to 1:
    [03:37:28] NeroVision 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4124442624, ISRC ""
    [03:37:28] NeroVision DAO layout:
    [03:37:28] NeroVision ===========
    [03:37:28] NeroVision __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    [03:37:28] NeroVision 0 | lead-in | 0 | 0x41 | 0x00
    [03:37:28] NeroVision 0 | 1 | 0 | 0x41 | 0x00
    [03:37:28] NeroVision 0 | 1 | 1 | 0x41 | 0x00
    [03:37:28] NeroVision 2013888 | lead-out | 1 | 0x41 | 0x00
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:36 AM #13 Phase 24 File APIProgress.cpp, Line 276
    [03:37:28] NeroVision Caching of files started
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:36 AM #14 Text 0 File Burncd.cpp, Line 4120
    [03:37:28] NeroVision Cache writing successful.
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:36 AM #15 Phase 25 File APIProgress.cpp, Line 276
    [03:37:28] NeroVision Caching of files completed
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:36 AM #16 Phase 36 File APIProgress.cpp, Line 276
    [03:37:28] NeroVision Burn process started at 8x (11,080 KB/s)
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:37 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2654
    [03:37:28] NeroVision Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:37 AM #18 Text 0 File DVDR.cpp, Line 2379
    [03:37:28] NeroVision Recording mode: Sequential Recording Mode
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:37 AM #19 Text 0 File Mmc.cpp, Line 21708
    [03:37:28] NeroVision Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:37 AM #20 Text 0 File DVDR.cpp, Line 2534
    [03:37:28] NeroVision Start write address at LBA 0
    [03:37:28] NeroVision DVD high compatibility mode: Yes
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:37 AM #21 Text 0 File Cdrdrv.cpp, Line 8862
    [03:37:28] NeroVision ---- DVD Structure: Physical Format Information (00h) ----
    [03:37:28] NeroVision Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    [03:37:28] NeroVision Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
    [03:37:28] NeroVision Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    [03:37:28] NeroVision Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    [03:37:28] NeroVision Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    [03:37:28] NeroVision Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    [03:37:28] NeroVision End Physical Sector Number of Data Area: 0 h
    [03:37:28] NeroVision End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    [03:37:28] NeroVision Data in Burst Cutting Area (BCA) does not exist
    [03:37:28] NeroVision Start sector number of the current Border-Out: 0 h
    [03:37:28] NeroVision Start sector number of the next Border-In: 0 h
    [03:37:28] NeroVision Media Specific [16..63]:
    [03:37:28] NeroVision 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    [03:37:28] NeroVision 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    [03:37:28] NeroVision 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:33:58 AM #22 Text 0 File Cdrdrv.cpp, Line 1286
    [03:37:28] NeroVision 03:33:58.203 - HP DVD Writer 530r\H0 T0 : Queue again later
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:37:06 AM #23 SCSI -1046 File Cdrdrv.cpp, Line 1434
    [03:37:28] NeroVision SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x07A30000
    [03:37:28] NeroVision Status: 0x04 (0x01, SCSI_ERR)
    [03:37:28] NeroVision HA-Status 0x00 (0x00, OK)
    [03:37:28] NeroVision TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    [03:37:28] NeroVision Sense Key: 0x02 (KEY_NOT_READY)
    [03:37:28] NeroVision Sense Code: 0x30
    [03:37:28] NeroVision Sense Qual: 0x05
    [03:37:28] NeroVision CDB Data: 0x2A 0x00 0x00 0x00 0x1E 0xA0 0x00 0x00 0x20 0x00 0x00 0x00
    [03:37:28] NeroVision Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
    [03:37:28] NeroVision 0x00 0x00 0x00 0x00 0x30 0x05
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:37:06 AM #24 CDR -1046 File Writer.cpp, Line 311
    [03:37:28] NeroVision Illegal disc
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:37:06 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
    [03:37:28] NeroVision all writers idle, stopping conversion
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:37:06 AM #26 Text 0 File ThreadedTransfer.cpp, Line 222
    [03:37:28] NeroVision conversion idle, stopping reader
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:37:06 AM #27 Text 0 File DVDR.cpp, Line 2774
    [03:37:28] NeroVision EndDAO: Last written address was 7839
    [03:37:28] NeroVision
    [03:37:28] NeroVision 3:37:06 AM #28 Phase 38 File APIProgress.cpp, Line 276
    [03:37:28] NeroVision Burn process failed at 8x (11,080 KB/s)
     
    Last edited: Aug 31, 2005
    peev34, Aug 30, 2005
    #1
  2. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    'fraid that logfile is appalling, it's far too large to work with, but more importantly there's only 1 line of value in there -

    - try applying this patch - http://www.nero.com/en/Patch_for_NVE3.html


    Other than that, you need to edit the post, trim it right down, we need the last section only, ie that starts similar to this -


    My pc is not coping with this logfile of yours, it's maxxing out trying to load all that lot into memory, so if you need help, you must remove the contents of that post and replace it with the bit i requested..
     
    creaky, Aug 31, 2005
    #2
  3. enigma200

    enigma200 Guest

    I am experiencing same problems using NeroVision Express 3. I have applied the SMCPatch that is available on nero website. Problem that is generated is as follows:

    ----------------

    [20:26:57] DVDEngine SEH EXCEPTION (0xC0000005: ACCESS_VIOLATION) was raised in EM2V.DLL at RVA 0x00011135.
    [20:26:57] DVDEngine ********END: _VOBS - Process VOB
    [20:26:57] DVDEngine ******END: VTSTT_VOBS#1 - Process Create
    [20:26:58] DVDEngine ****END: Create - VTSTT_VOBS#1
    [20:26:58] DVDEngine **END: _DVDVideo - Create
    [20:26:58] DVDEngine ########################################################################################
    [20:26:58] DVDEngine ERROR
    [20:26:58] DVDEngine cause: 128 (nmc_processing_exception)
    [20:26:58] DVDEngine source: DEGuardNMCConversion
    [20:26:58] DVDEngine description: SEH EXCEPTION caught during INeroMediaConverter:eek:Conversion().
    [20:26:58] DVDEngine ########################################################################################

    -------

    and the last bit shows:

    -------
    [20:26:58] NeroVision Windows XP 5.1
    [20:26:58] NeroVision IA32
    [20:26:58] NeroVision WinAspi: -
    [20:26:58] NeroVision ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    [20:26:58] NeroVision Nero API version: 6.6.0.16
    [20:26:58] NeroVision Using interface version: 6.6.0.10
    [20:26:58] NeroVision Installed in: C:\Program Files\Ahead\Nero\
    [20:26:58] NeroVision Application: ahead\NeroVision
    [20:26:58] NeroVision Internal Version: 6, 6, 0, 16b
    [20:26:58] NeroVision === Scsi-Device-Map ===
    [20:26:58] NeroVision DiskPeripheral : SAMSUNG SV1204H atapi Port 0 ID 0 DMA: On
    [20:26:58] NeroVision CdRomPeripheral : PHILIPS DVDRW228 atapi Port 1 ID 0 DMA: On
    [20:26:58] NeroVision CdRomPeripheral : JLMS DVD-ROM LTD-166S atapi Port 1 ID 1 DMA: On
    [20:26:58] NeroVision === CDRom-Device-Map ===
    [20:26:58] NeroVision PHILIPS DVDRW228 F: CDRom0
    [20:26:58] NeroVision JLMS DVD-ROM LTD-166S G: CDRom1
    [20:26:58] NeroVision =======================
    [20:26:58] NeroVision AutoRun : 1
    [20:26:58] NeroVision Excluded drive IDs:
    [20:26:58] NeroVision WriteBufferSize: 83886080 (0) Byte
    [20:26:58] NeroVision ShowDrvBufStat : 0
    [20:26:58] NeroVision BUFE : 0
    [20:26:58] NeroVision Physical memory : 1023MB (1048044kB)
    [20:26:58] NeroVision Free physical memory: 646MB (662052kB)
    [20:26:58] NeroVision Memory in use : 36 %
    [20:26:58] NeroVision Uncached PFiles: 0x0
    [20:26:58] NeroVision Use Inquiry : 1
    [20:26:58] NeroVision Global Bus Type: default (0)
    [20:26:58] NeroVision Check supported media : Disabled (0)
    [20:26:58] NeroVision 31.8.2005
    [20:26:58] NeroVision NeroAPI
    [20:26:58] NeroVision Existing drivers:
    [20:26:58] NeroVision Registry Keys:
    [20:26:58] NeroVision HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    ------

    I have also checked he version of the EM2V.DLL. When doing a search on my PC i get three hits for this file:

    em2v.dll c:\program files\Ahead\Nero
    emdv.DLL c:\program files\Ahead\Nerovision
    emdv.dll c:\program files\Common Files\DSFilter

    All the three have the same file version (3,2,0,20c) and product version is (2,0,07). I dont know if the file level information is relevant but i will mention it in case someone else is experencing the same problem wit this particular module.

    What I am doing is: merging 3-5 mpeg clips and adding a transition in between. If I remove the transitions I still have the same problem. My Nero version is on 6.6.0.16. I was experiencing the same in .15 aswell.

    My PC specs are as follows.

    P4 3.0GHz
    1GB RAM
    120 GB HDD
    Nvidia Geoforce 4 MX 440 128MB
    Running Windows Prof. XP / sp2
    I am using a PHILIPS DVDRW228 for which i have upgraded the firmware to 1.72 (latest)

    I have only got Nero video editing software installed no onther software dealing with video editing is installed.

    I have googled on this particular problem and have come across many occurances of this and also seen expressions that Nero is not resolving this / do not know what is causing this. I have seen postings of this problem almost a year old and without any satisfactory result. I don't know what Nero are doing to address this.

    If there is anyone out there, please advise. Please let me know if you need any other log files.

    Thanks.

    Enigma
     
    Last edited by a moderator: Aug 31, 2005
    enigma200, Aug 31, 2005
    #3
  4. peev34

    peev34 Member

    Joined:
    Oct 7, 2004
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    Edited the error lof per you request. Sorry about that!!
     
    peev34, Aug 31, 2005
    #4
  5. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @peev34 - no worries, it's not your fault, that logfile for some reason was longer than any Nerovision log i've seen before, and they're all real long.

    All i can see is
    - all i can think is your drive doesn't like those discs

    - try 4x, most people recommend 4x anyway..
     
    creaky, Aug 31, 2005
    #5

Share This Page