Hi well first I try to burn alot of data onto my Dual Layer Disk but i get error "Compliant will not fit onto blank disc." And i know i put less MB on my Dual Layer Disk then there is capable so i should have enough room. Here is log. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM Nero version: 6.3.0.3 Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL0C - HA 1 TA 1 - 6.3.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <TSSTcorp DVD-ROM SH-D162C>Version: TS04 - HA 1 TA 0 - 6.3.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : MAXTOR 4K040H2 atapi Port 0 ID 0 DMA: On DiskPeripheral : MAXTOR STM3200820A atapi Port 0 ID 1 DMA: On CdRomPeripheral : TSSTcorp DVD-ROM SH-D162C atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-18A1P atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp DVD-ROM SH-D162 D: CDRom0 LITE-ON DVDRW LH-18A1P F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 53477376 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 351MB (359920kB) Free physical memory: 137MB (140444kB) Memory in use : 60 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.3.2007 ISO compilation 6:46:21 PM #1 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 6:46:21 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 6:46:21 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 6:46:21 PM #4 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 6:46:22 PM #5 Phase 41 File dlgbrnst.cpp, Line 1800 Compilation will not fit onto a blank disc 6:46:22 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 6:46:22 PM #7 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: LITE-ON DVDRW LH-18A1P, Media type: DVD+R9 Dual Layer Disc Manufacturer ID: RICOHJPN, Media Type ID: D01, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 3 6:46:22 PM #8 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec) So then i just try to fill my DL disk as if it were a Single layer DVD+R Disk and i get this... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 7:18:06 PM Nero version: 6.3.0.3 Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL0C - HA 1 TA 1 - 6.3.0.3 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <TSSTcorp DVD-ROM SH-D162C>Version: TS04 - HA 1 TA 0 - 6.3.0.3 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : MAXTOR 4K040H2 atapi Port 0 ID 0 DMA: On DiskPeripheral : MAXTOR STM3200820A atapi Port 0 ID 1 DMA: On CdRomPeripheral : TSSTcorp DVD-ROM SH-D162C atapi Port 1 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW LH-18A1P atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === TSSTcorp DVD-ROM SH-D162 D: CDRom0 LITE-ON DVDRW LH-18A1P F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 53477376 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 351MB (359920kB) Free physical memory: 124MB (127024kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 28.3.2007 ISO compilation 6:25:53 PM #1 Text 0 File Isodoc.cpp, Line 6029 Iso document burn settings ------------------------------------------ Determine maximum speed : TRUE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 2 (Max. of 31 chars) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 6:25:53 PM #2 Text 0 File Reader.cpp, Line 118 Reader running 6:25:53 PM #3 Text 0 File Writer.cpp, Line 124 Writer LITE-ON DVDRW LH-18A1P running 6:25:53 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3882 First writeable address = 0 (0x00000000) 6:25:53 PM #5 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 6:25:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 4173823 (927:30.73, 8151MB) Last address to be written: 2176287 (483:37.12, 4250MB) 6:25:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 6:25:53 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: LITE-ON DVDRW LH-18A1P, Media type: DVD+R9 Dual Layer Disc Manufacturer ID: RICOHJPN, Media Type ID: D01, Product revision number: 2 Disc Application Code: 0, Extended Information Indicators: 3 6:25:53 PM #9 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:25:53 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 2176288 (2176288) = #2176288/483:37.13 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2176288 blocks [LITE-ON DVDRW LH-18A1P ] -------------------------------------------------------------- 6:25:54 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [LITE-ON DVDRW LH-18A1P ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4457037824, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2176288 | lead-out | 1 | 0x00 | 0x41 6:25:54 PM #12 Phase 24 File dlgbrnst.cpp, Line 1800 Caching of files started 6:25:54 PM #13 Text 0 File Burncd.cpp, Line 4073 Cache writing successful. 6:25:54 PM #14 Phase 25 File dlgbrnst.cpp, Line 1800 Caching of files completed 6:25:54 PM #15 Phase 28 File dlgbrnst.cpp, Line 1800 Speed measurement started 6:25:54 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:28:35 PM #17 Text 0 File WriterStatus.cpp, Line 115 <LITE-ON DVDRW LH-18A1P > start writing Lead-Out at LBA 2176288 (213520h), lenght 0 blocks 6:28:35 PM #18 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:28:35 PM #19 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 6:28:35 PM #20 Phase 29 File dlgbrnst.cpp, Line 1751 Speed measurement completed: 19.7x (27,304 KB/s) 6:28:35 PM #21 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 2.4x (3,312 KB/s) 6:28:35 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:28:35 PM #23 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 13:30,625 (810625ms) -> OK 6:28:35 PM #24 Text 0 File DVDR.cpp, Line 1512 Recording mode: unknown Recording Mode 6:28:35 PM #25 Text 0 File Mmc.cpp, Line 19487 Set BUFE: SMART-BURN -> ON , SMART-BURN : ON 6:28:35 PM #26 Text 0 File DVDR.cpp, Line 1643 Start write address at LBA 0 DVD high compatibility mode: Yes 6:28:35 PM #27 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R DL (14), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable Linear Density: 0,293 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: FCFFFF h End Sector Number in Layer 0: 22D7FF h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 03 52 49 43 4F 48 4A - 50 4E 44 30 31 02 40 25 ..RICOHJPND01.@% 25 37 10 00 2C 6C 00 2C - 6C 20 1F 0C 0C 14 14 02 %7..,l.,l....... 01 01 20 00 20 1F 0C 0C - 14 14 02 01 01 20 00 04 ................ 6:30:05 PM #28 SCSI -1106 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x037B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x73 0x03 6:30:05 PM #29 CDR -1106 File Writer.cpp, Line 301 Power calibration error 6:30:05 PM #30 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:30:05 PM #31 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 6:30:06 PM #32 Text 0 File DVDR.cpp, Line 1847 EndDAO: Last written address was -1 6:30:06 PM #33 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 6:30:06 PM #34 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 6:30:06 PM #35 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 2.4x (3,312 KB/s) Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 11:59:44 PM (Adapter driver for rec)
what DL Disc are you using? thats all i can say about this, sorry i can't get anything out of the log.
Hi koolyoe Here's some more suggestions: Nero version: 6.3.0.3 Update Nero - this older version didn't handle dual layeras well as the newer versions. Update package 1 - 6.6.1.5. - link Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL0C Update the firmware to GLOF Disc Manufacturer ID: RICOHJPN Not sure how good Ricoh made DL's are - the best is Verbatim. Give the updates and go. Keep us posted.
