So i just bought prison break season 2 & im burning it before i watch it (i dont take the chance on the original getting scratched) so i ripped it with dvdshrink which went fine then i started to burn it & it failed(log1). (ill post both logs) so i restarted my computer & tried to burn it with nero seperatly & it failed again(log2). then i tried it again & got a write error. then i tried again at 8x & it worked. my problem is i cant figure out how to get it set to dma mode. i went to device manager & it doesnt show what i have seen to look for to change..heres a SS of what mine looks like (under ide ata/atapi controllers it doesnt show anything about primary or secondary) Computer Specs: (let me know if u need more specs) AMD Atholon 3700+ 2.25GHz 1GB Ram 1st Log - failed around 60-70 percent Code: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM Nero Version: 6.6.0.8 (Nero Express) Recorder: <MAD DOG TF-DVDRW TSH652D>Version: MD00 - HA 0 TA 2 - 6.6.0.8 Adapter driver: <nvata> HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <MAD DOG TF-DVDRW TSH652D>Version: MD00 - HA 0 TA 2 - 6.6.0.8 Adapter driver: <nvata> HA 0 === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00GVC0 nvata Port 0 ID 0 DMA: Off DiskPeripheral : Maxtor 4D060H3 nvata Port 0 ID 1 DMA: Off CdRomPeripheral : MAD DOG TF-DVDRW TSH652D nvata Port 0 ID 2 DMA: Off === CDRom-Device-Map === MAD DOG TF-DVDRW TSH652D D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 620MB (634952kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.9.2007 UDF/ISO compilation 7:07:52 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 7:07:52 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 7:07:52 PM #3 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 7:07:52 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 7:07:52 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 7:07:52 PM #6 Text 0 File Writer.cpp, Line 122 Writer MAD DOG TF-DVDRW TSH652D running 7:07:52 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 7:07:52 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 7:07:52 PM #9 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 7:07:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) 7:07:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 7:07:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: MAD DOG TF-DVDRW TSH652D, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 7:07:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:07:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [MAD DOG TF-DVDRW TSH652D] -------------------------------------------------------------- 7:07:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [MAD DOG TF-DVDRW TSH652D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 7:07:52 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 7:07:52 PM #17 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 7:07:52 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 7:07:52 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (22,160 KB/s) 7:07:52 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:07:52 PM #21 Text 0 File Cdrdrv.cpp, Line 8442 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:07:52 PM #22 Text 0 File DVDPlusRW.cpp, Line 638 Start write address at LBA 0 DVD high compatibility mode: Yes 7:12:13 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x0A540000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x13 0xDE 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 7:12:13 PM #24 CDR -1135 File Writer.cpp, Line 311 Write error 7:12:13 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:12:13 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:12:31 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 6:51:00 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\nvata.sys': Ver=5.10.2600.0534 built by: WinDDK, size=92800 bytes, created 5/17/2005 4:45:08 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) 2nd log - failed around 60-70 percent Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 12:35:32 PM Nero Version: 6.6.0.8 (Nero Express) Recorder: <MAD DOG TF-DVDRW TSH652D>Version: MD00 - HA 0 TA 2 - 6.6.0.8 Adapter driver: <nvata> HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <MAD DOG TF-DVDRW TSH652D>Version: MD00 - HA 0 TA 2 - 6.6.0.8 Adapter driver: <nvata> HA 0 === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00GVC0 nvata Port 0 ID 0 DMA: Off DiskPeripheral : Maxtor 4D060H3 nvata Port 0 ID 1 DMA: Off CdRomPeripheral : MAD DOG TF-DVDRW TSH652D nvata Port 0 ID 2 DMA: Off === CDRom-Device-Map === MAD DOG TF-DVDRW TSH652D D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 620MB (634952kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 5.9.2007 UDF/ISO compilation 7:07:52 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 7:07:52 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 7:07:52 PM #3 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 7:07:52 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 7:07:52 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 7:07:52 PM #6 Text 0 File Writer.cpp, Line 122 Writer MAD DOG TF-DVDRW TSH652D running 7:07:52 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 7:07:52 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 7:07:52 PM #9 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 7:07:52 PM #10 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286127 (508:01.52, 4465MB) 7:07:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 7:07:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: MAD DOG TF-DVDRW TSH652D, Media type: DVD+R Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4 Disc Application Code: 0, Extended Information Indicators: 7 7:07:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:07:52 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [MAD DOG TF-DVDRW TSH652D] -------------------------------------------------------------- 7:07:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [MAD DOG TF-DVDRW TSH652D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 7:07:52 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 7:07:52 PM #17 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 7:07:52 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 7:07:52 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 16x (22,160 KB/s) 7:07:52 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:07:52 PM #21 Text 0 File Cdrdrv.cpp, Line 8442 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: RICOHJPN Media type ID: R03 Product revision number: 4 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8 23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:07:52 PM #22 Text 0 File DVDPlusRW.cpp, Line 638 Start write address at LBA 0 DVD high compatibility mode: Yes 7:12:13 PM #23 SCSI -1135 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 0, TA 2, LUN 0, buffer 0x0A540000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x13 0xDE 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 7:12:13 PM #24 CDR -1135 File Writer.cpp, Line 311 Write error 7:12:13 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:12:13 PM #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:12:31 PM #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 16x (22,160 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 6:51:00 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\nvata.sys': Ver=5.10.2600.0534 built by: WinDDK, size=92800 bytes, created 5/17/2005 4:45:08 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)[/code] 3rd time burning i just got a write error in nero around 60%
i found something like what all the sites i seen say to do to change to dma mode, but its not the same... here it is
Hey SC44, Your DMA is fine. Looks like you have a SATA setup of sorts and your Mad Dog burner is set to Ultra DMA 2 - not the fastest but serviceable. Couple of things I'd try, first reduce your burning speed to 4x, Burn process failed at 16x (22,160 KB/s) second, I'd reduce my target size to 4460 or less Last address to be written: 2286127 (508:01.52, 4465MB) . To do this in Nero, select Custom Size and type it in. third, you have Roxio installed, File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/7/2007 6:51:00 PM. Download RoxioZapper here to remove.
to reset your burner you need to delete your ide secondary controllers then reboot your computer windows will reinstall the controllers and reset them to DMA
Your burner is actually listed in the second pic on the Secondary Channel Tab as Master Drive. It's labeled "MAD DOG TF-DVDRW TSH652D". Underneath the name, it lists transfer mode as "Ultra DMA 2 - Ultra33" (it's greyed out).
yea i changed that before i took the screenshots...i havent burned any movies since then to see if it works or not. but i didnt understand on how 2 uninstall it through device manager, because my IDE/ATA tab shows different things then all the other ones i seen online
That's because I think you have a NVidia SATA setup. It would look different than the standard IDE/ATA items shown.
i guess next time i reformat i will have to check again to see if i can set it up differently, because i dont have sata drives right now
Well, that a nVidia Serial & IDe controller. You can try going into the device manager (your 1st image), go th IDE ATA/ATAPI Controllers, uninstall all 3 items and then reboot. Windows will reinstall the controllers upon startup and will reset your DMA. You might or might not see an increase in the DMA setting for your burner. Have you tried the other suggestions for getting a sucessful burn? Have you tried reducing your burning speed and have you removed Roxio (Roxio and Nero don't play well together)?
I usually have a successful burn , just recently its been failing (so i have to turn down the burn speed). I dont have roxio installed, i was going to awhile ago but i heard it & nero both being installed causes problems, so i didnt. I will try going into device manager & uninstalling all 3 things under IDE ATA/ATAPI Controllers to see if it resets the DMA or not. I Usually used the disc to install everything for my motherboard when i reformatted because of the ethernet drivers being on it. If windows is Not able to install my 3 IDE ATA/ATAPI controllers, will it have any negative affects on my comp at that time? I have alot of stuff on this computer & cant lose any of it.
arent tha ide/ata controllers for all my drivers? i dont wanna uninstall them & have 2 reformat right then n there
your burners should be on the secondary ide controller deleate it and windows will reinstall after you reboot it will not effect your data or programs on your computer
You were getting successful burns and now you are not, so it could be a burner going bad. You should replace it. I buy good Lite-On and Asus burners on line for a bit over $30.00 so why fight a questionable burner. The media you are using is excellent but you are getting write errors, and you did try this at 8X so it is probably your "Mad Dog" burner. (I guess you can tell I don't like Mad Dog burners) There is a possibility that your media is the problem so you could try some Verbatim or Taiyo Yuden. Doubtful. Your Nero version is not the best. At some point you should download and install both of these packages: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe According to your Nero log you do have Roxio drivers installed: Use the Zappper tool mentioned. Roxio usually does not cause problems anymore and if it did, it would not be listed as a write error in your Nero log. Your selected DVD size is not causing the problem. You are not even close to the edge of the blank when your error is occuring. Good idea I guess if you are using second rate media, which you are not. I never bought into that idea. You actually have 4482 Mb of space so the default 4464 Mb gives enough cushion. This idea was suggested back in the days of crappy Princo media and somehow folks started to apply it to all media. PIO/DMA does not cause write errors. Your burner will slow down as needed and if the transfer rate was a problem you would get a buffer error. The problem here is the actual burning of the blank disc so look in that area first.
