for some reason when im trying to burn kvcds using nero. evry disc fails to burn right at the end, i think its when its finalizing the disc. i have tried playing them and they are ok till the end...any ideas whats going wrong? your help would be most appreciated. it is a fairly new burner and up until now i hadnt had any problems.
plus i suspect bad media among other things. download dvdinfopro (free) and run a disc thru it's media info check and paste results here
im using nero 6.6.0.1.3 Format Capacity Blank Disc Free Blocks 736960512 Free Capacity 702.82MB(736.96MB) Media Type CD-R ATIP Start Time of Lead In (Media Code) 97m32s19f ATIP Last Possible Start Time of Lead Out 79m59s71f Manufacturer Name Prodisc Technology Inc. HD-BURN Certified NO Available Write Descriptor CAV 39.9x 6000KBps Available Write Descriptor CAV 31.9x 4800KBps Available Write Descriptor CAV 23.9x 3600KBps Available Write Descriptor CLV 16.0x 2400KBps Available Write Descriptor CLV 8.0x 1200KBps allso dunno if this is related but ive uninstaled alcohol and its still showing as there. is there a clen up tool for this??
let's have last section of Nero log, it's in C:\program files\ahead\nero\nerohistory.log. All burns good and bad are appended to this log so paste the last section MINUS the serial numbers which usually begins with '1A21' or similar
heres the log you asked for and thanks for helping. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34 Nero Version: 6.6.0.13 Internal Version: 6, 6, 0, 13c Recorder: <TSSTcorp CD/DVDW TS-H552U>Version: US03 - HA 1 TA 1 - 6.6.0.13 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <TOSHIBA DVD-ROM SD-M1502>Version: 1808 - HA 1 TA 0 - 6.6.0.13 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : QUANTUM FIREBALLlct20 40 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-M1502 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : TSSTcorp CD/DVDW TS-H552U atapi Port 1 ID 1 DMA: Off CdRomPeripheral : VOBID InstantDrive CD 14 VOBID Port 2 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 4 ID 1 DMA: Off === CDRom-Device-Map === TOSHIBA DVD-ROM SD-M1502 D: CDRom0 TSSTcorp CD/DVDW TS-H552U E: CDRom1 VOBID InstantDrive CD F: CDRom4 Generic DVD-ROM G: CDRom2 Generic DVD-ROM I: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 79MB (81916kB) Memory in use : 68 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.7.2005 CueSheet 12:54:29 #1 Text 0 File Burncd.cpp, Line 2882 TSSTcorp CD/DVDW TS-H552U Super Link activated 12:54:29 #2 Text 0 File Reader.cpp, Line 127 Reader running 12:54:29 #3 Text 0 File Writer.cpp, Line 122 Writer TSSTcorp CD/DVDW TS-H552U running 12:54:29 #4 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-At-Once, using CD-R/RW media 12:54:32 #5 Text 0 File DlgWaitCD.cpp, Line 260 Last possible write address on media: 368999 ( 82:01.74), real: 79:59.70 Last address to be written: 363624 ( 80:50.24) 12:54:32 #6 Text 0 File DlgWaitCD.cpp, Line 272 Write in overburning mode: YES (enabled: CD) 12:54:32 #7 Text 0 File DlgWaitCD.cpp, Line 2339 Recorder: TSSTcorp CD/DVDW TS-H552U; CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc. ATIP Data: Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 12:54:32 #8 Text 0 File DlgWaitCD.cpp, Line 438 >>> Protocol of DlgWaitCD activities: <<< ========================================= Not enough free discspace. (Medium in drive: CD-R. Medium required by compilation: CD-R/RW.) 12:54:32 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_RAW_MODE2 (Cue Sheet Track) 2 indices, index0 (150) provided original disc pos #0 + 300 (300) = #300/0:4.0 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 300 blocks [TSSTcorp CD/DVDW TS-H552U] 1: TRM_DATA_RAW_MODE2 (Cue Sheet Track) 2 indices, index0 (150) provided original disc pos #0 + 363175 (363175) = #363175/80:42.25 relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_ULTRARAW96_MODE2, 2448, config 4, wanted index0 0 blocks, length 363175 blocks [TSSTcorp CD/DVDW TS-H552U] -------------------------------------------------------------- 12:54:32 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [TSSTcorp CD/DVDW TS-H552U] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x20; Session Closed, disc fixated Tracks 1 to 2: 1: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 0 367200 1101600, ISRC "" 2: TRM_ULTRARAW96_MODE2, 2448/0x04, FilePos 1101600 1468800 890521200, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 300 | 2 | 0 | 0x41 | 0x00 450 | 2 | 1 | 0x41 | 0x00 363625 | lead-out | 1 | 0x41 | 0x00 12:54:34 #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 12:54:34 #12 Text 0 File Burncd.cpp, Line 4051 Cache writing successful. 12:54:34 #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 12:54:34 #14 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 40x (6,000 KB/s) 12:54:34 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
Well there are a few thing wrong with your log. Lets hit the first one that pops right out This is more than likely your main problem. You don't have enough space on the disk you are writing on to complete the task. It looks like you are using a CD-RW? which will not hold as much as a CD-R. Either make the file smaller or burn the file to a CD-r. This is also a little problem, but probably nothing to do with the problem you are having at the moment You need to enable DMA mode on all those drives.. Check out this link for instructions http://home.comcast.net/~bbmayo/checking DMA.pdf Also Turn Off overburn mode in Nero. This will also stop this from happening. Cheers
bbmayo's back! @manc123 - - newer version US06 of your firmware is here - http://forum.rpc1.org/dl_firmware.php?download_id=2011 - close more applications to free up more memory, you're in virtual memory territory which means your hard disc will be 'swapping', therefore interfering with the burn - see bbmayo's comment re overburning - oops that won't work!, you got hardly any free memory above, and your system can't even give you any virtual memory because you've ran out of disc space too! - slow it down to say 24x
try running ccleaner to see if can clear some room up on your hd http://www.filehippo.com/download_ccleaner.html
thanks everyone for your help, looks like a mixture of probs then not enough memory hdd space and burning too fast. cheers guys
