I'm extremely confused about a problem I'm having burning movies with Nero Express 6.The P.C. is a compaq presario with about 700mb of ram. It takes me anywhere from 8 to 10 hrs to burn a movie how can I fix this issue? I have all the settings for speed on my dvd burner set as high as possible,but it still takes a long time to burn. Everyone else tells me it onlt takes them an hour or 2 tops. I shut off my internet and disable my antivirus and this still makes no difference any suggestions would be great..Thanx
You can post a log of the last burn. http://my.afterdawn.com/locoeng/blog_entry.cfm/385 Also, run Nero Tools > Nero Info Tool, click the 'Configuration' tab and look to see if 'DMA' is on for the HDD and the DVD burner.
I checked the config and all DMA is turned on here is a copy of my last log.....l14.7.2007 NeroAPI 11:53:00 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:53:00 PM #2 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: -1 ( 0:00.-1, 0MB) 11:53:00 PM #3 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 11:53:00 PM #4 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 11:53:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:53:00 PM #6 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 11:53:00 PM #7 Text 0 File BurnAtOnceRecorder.cpp, Line 1010 Estimated filesystem size: 544 11:53:00 PM #8 Phase 36 File APIProgress.cpp, Line 275 Burn process started at 16x (22,160 KB/s) 11:53:00 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1704 Buffering files started 11:53:00 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1415 Buffering VIDEO_TS.VOB 11:53:01 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 2598 Finished buffering file VIDEO_TS.VOB of size 77824 bytes (38 sectors) 11:53:01 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VIDEO_TS.VOB of size 77824 bytes (38 sectors) 11:53:01 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2678 Buffering files finished successfully 11:53:01 PM #14 Text 0 File DVDR.cpp, Line 2846 Recording mode: Sequential Recording Mode for Multisession 11:53:01 PM #15 Text 0 File DVDR.cpp, Line 3002 Start write address at LBA 0 DVD high compatibility mode: No 11:53:01 PM #16 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:53:01 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 677 Reserved fragment at 0. Length: 640 11:53:01 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1887 Reserved start fragment at 0 11:53:01 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 677 Reserved fragment at 640. Length: 64 11:53:01 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_1.VOB at sector 704 5:29:17 AM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors) 5:29:17 AM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2277 Added extra file VTS_01_2.VOB 5:29:17 AM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_2.VOB at sector 524991 7:07:47 AM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors) 7:07:47 AM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2277 Added extra file VTS_01_3.VOB 7:07:47 AM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_3.VOB at sector 1049278 8:45:37 AM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors) 8:45:37 AM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 2277 Added extra file VTS_01_4.VOB 8:45:37 AM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_4.VOB at sector 1573565 10:13:54 AM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_4.VOB of size 1073739776 bytes (524287 sectors) 10:13:54 AM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 2277 Added extra file VTS_01_5.VOB 10:13:54 AM #32 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_5.VOB at sector 2097852 10:26:41 AM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_5.VOB of size 237531136 bytes (115982 sectors) 10:26:41 AM #34 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_0.BUP at sector 2213834 10:26:41 AM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_0.BUP of size 88064 bytes (43 sectors) 10:26:52 AM #36 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_0.IFO at sector 640 10:27:02 AM #37 Text 0 File BurnAtOnceRecorder.cpp, Line 2645 Successfully released fragment at 640 10:27:02 AM #38 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_0.IFO of size 88064 bytes (43 sectors) 10:27:02 AM #39 Text 0 File BurnAtOnceRecorder.cpp, Line 1415 Buffering VIDEO_TS.IFO 10:27:02 AM #40 Text 0 File BurnAtOnceRecorder.cpp, Line 2607 Finished buffering file VIDEO_TS.IFO of size 12288 bytes (6 sectors) 10:27:02 AM #41 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VIDEO_TS.IFO of size 12288 bytes (6 sectors) 10:27:02 AM #42 Text 0 File BurnAtOnceRecorder.cpp, Line 1415 Buffering VIDEO_TS.BUP 10:27:02 AM #43 Text 0 File BurnAtOnceRecorder.cpp, Line 2607 Finished buffering file VIDEO_TS.BUP of size 12288 bytes (6 sectors) 10:27:02 AM #44 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VIDEO_TS.BUP of size 12288 bytes (6 sectors) 10:27:02 AM #45 Phase 175 File APIProgress.cpp, Line 275 Finalizing disc started 10:27:03 AM #46 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:27:03 AM #47 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:27:03 AM #48 Text 0 File BurnAtOnceRecorder.cpp, Line 3293 Writing filesystem of size 1114112 at sector 0 10:27:03 AM #49 Text 0 File BurnAtOnceRecorder.cpp, Line 2989 Writing VIDEO_TS.IFO at sector 544 10:27:03 AM #50 Text 0 File BurnAtOnceRecorder.cpp, Line 3217 Writing VIDEO_TS.VOB at sector 560 10:27:03 AM #51 Text 0 File BurnAtOnceRecorder.cpp, Line 3017 Writing VIDEO_TS.BUP at sector 608 10:28:04 AM #52 Phase 177 File APIProgress.cpp, Line 275 Disc finalized successfully 10:28:04 AM #53 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:28:04 AM #54 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:28:04 AM #55 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 10:28:08 AM #56 Phase 37 File APIProgress.cpp, Line 275 Burn process completed successfully at 16x (22,160 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 22/04/2007 8:15:25 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 02/05/2007 2:04:15 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== og file....
Is the top part of the log missing.I can't see the firmware version. Here's one here, it looks like your burner. I never seen a burn that long before.Does cutting that speed back to 4x change anything? No one at Afterdawn would countenance 16X. If you save the output to the HDD, can it burn faster with the likes of IMGBurn? http://forum.rpc1.org/dl_firmware.php?download_id=2056 http://www.imgburn.com/ Run ImgBurn Mode > 'Build' Output > 'Device' File > 'Browse for Folder', highlight on the 'VIDEO_TS' folder, > 'OK'
Im not sure if this is what I left out but heres some more info... Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 22/04/2007 8:15:25 PM File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 02/05/2007 2:04:15 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 1:54:32 PM NT-SPTI used Nero API version: 6.6.1.15 Using interface version: 6.6.0.10 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\NeroVision Internal Version: 6, 6, 1, 15 Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS05 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST340810A atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-248F E: CDRom1 LITE-ON DVDRW SOHW-1693S F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 759MB (777752kB) Free physical memory: 457MB (468804kB) Memory in use : 39 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) As for changing the burn speed to 4x when i finish putting the video files in and go to burn it only gives me the options of 2x 1x or max....
If that's the same drive, it's a few versions behind.But I don't see KS05 listed as a previous version. You should edit out the serial numbers following the header.
You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
Your DVD burner LITE-ON DVDRW SOHW-1693S has firmware incorporated into it. Firmware works with the Nero to improve burning rates and media recognition. The link below is to the Liteon site,search for the drive model number and decide whether you wish to install the firmware. http://www.liteonit.com.tw/global/index.php?option=com_wrapper&Itemid=154 Your Nero serial numbers are listed in your log under the heading I indicated. Use the little 'pecil¬epad' logo on the right side of your post to edit it out, lest someone steals it.
Thnx all for your help.. Yes I did have Roxio installed didnt even remember having it... I have also updated my firmware it was out of date... So I'll try burning a movie again tonight and see what happens... Thnx again..
Well I burnt a movie last night and it took 5 1/2 hours... a lil less than before but still pretty long... Could it just be the type of burner I have?
Did you try saving it to HDD then using the likes of IMGBurn? Try booting into safe mode and burning a disk.
No I havent tried IMGBURN but I guess I cud try it and see how it works... I will also try doing it in safe mode never heard of doing it that way but it's worth a try... Thnx
Well I burnt a movie last night in safe mode but duh me I forgot to put a disc in.. Do u want me to post it anyway to see if there is any other program interfering?
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 3 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On DiskPeripheral : ST340810A atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: On CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SAMSUNG CD-R/RW SW-248F E: CDRom1 LITE-ON DVDRW SOHW-1693S F: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 759MB (777752kB) Free physical memory: 423MB (433996kB) Memory in use : 44 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.7.2007 NeroAPI 10:11:36 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:11:36 PM #2 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: -1 ( 0:00.-1, 0MB) 10:11:36 PM #3 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 10:11:36 PM #4 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R Disc Manufacturer: MCC 03 - RG20 Disc Application Code: 64, Disc Physical Code: 193 10:11:36 PM #5 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:11:36 PM #6 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:11:36 PM #7 Text 0 File BurnAtOnceRecorder.cpp, Line 1010 Estimated filesystem size: 544 10:11:36 PM #8 Phase 36 File APIProgress.cpp, Line 275 Burn process started at 16x (22,160 KB/s) 10:11:36 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1704 Buffering files started 10:11:36 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1415 Buffering VIDEO_TS.VOB 10:11:36 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 2598 Finished buffering file VIDEO_TS.VOB of size 75776 bytes (37 sectors) 10:11:36 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VIDEO_TS.VOB of size 75776 bytes (37 sectors) 10:11:36 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2678 Buffering files finished successfully 10:11:36 PM #14 Text 0 File DVDR.cpp, Line 2846 Recording mode: Sequential Recording Mode for Multisession 10:11:36 PM #15 Text 0 File DVDR.cpp, Line 3002 Start write address at LBA 0 DVD high compatibility mode: No 10:11:36 PM #16 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 10:11:36 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 677 Reserved fragment at 0. Length: 640 10:11:36 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 1887 Reserved start fragment at 0 10:11:36 PM #19 Text 0 File BurnAtOnceRecorder.cpp, Line 677 Reserved fragment at 640. Length: 48 10:11:36 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_1.VOB at sector 688 11:48:19 PM #21 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_1.VOB of size 1073739776 bytes (524287 sectors) 11:48:19 PM #22 Text 0 File BurnAtOnceRecorder.cpp, Line 2277 Added extra file VTS_01_2.VOB 11:48:19 PM #23 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_2.VOB at sector 524975 1:17:16 AM #24 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_2.VOB of size 1073739776 bytes (524287 sectors) 1:17:16 AM #25 Text 0 File BurnAtOnceRecorder.cpp, Line 2277 Added extra file VTS_01_3.VOB 1:17:16 AM #26 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_3.VOB at sector 1049262 2:47:43 AM #27 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_3.VOB of size 1073739776 bytes (524287 sectors) 2:47:43 AM #28 Text 0 File BurnAtOnceRecorder.cpp, Line 2277 Added extra file VTS_01_4.VOB 2:47:43 AM #29 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_4.VOB at sector 1573549 3:20:32 AM #30 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_4.VOB of size 476469248 bytes (232651 sectors) 3:20:32 AM #31 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_0.BUP at sector 1806200 3:20:32 AM #32 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_0.BUP of size 65536 bytes (32 sectors) 3:20:44 AM #33 Text 0 File BurnAtOnceRecorder.cpp, Line 1409 Writing VTS_01_0.IFO at sector 640 3:20:56 AM #34 Text 0 File BurnAtOnceRecorder.cpp, Line 2645 Successfully released fragment at 640 3:20:56 AM #35 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VTS_01_0.IFO of size 65536 bytes (32 sectors) 3:20:56 AM #36 Text 0 File BurnAtOnceRecorder.cpp, Line 1415 Buffering VIDEO_TS.IFO 3:20:56 AM #37 Text 0 File BurnAtOnceRecorder.cpp, Line 2607 Finished buffering file VIDEO_TS.IFO of size 12288 bytes (6 sectors) 3:20:56 AM #38 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VIDEO_TS.IFO of size 12288 bytes (6 sectors) 3:20:56 AM #39 Text 0 File BurnAtOnceRecorder.cpp, Line 1415 Buffering VIDEO_TS.BUP 3:20:56 AM #40 Text 0 File BurnAtOnceRecorder.cpp, Line 2607 Finished buffering file VIDEO_TS.BUP of size 12288 bytes (6 sectors) 3:20:56 AM #41 Text 0 File BurnAtOnceRecorder.cpp, Line 2665 Finished writing file VIDEO_TS.BUP of size 12288 bytes (6 sectors) 3:20:56 AM #42 Phase 175 File APIProgress.cpp, Line 275 Finalizing disc started 3:20:57 AM #43 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:20:57 AM #44 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 3:20:57 AM #45 Text 0 File BurnAtOnceRecorder.cpp, Line 3293 Writing filesystem of size 1114112 at sector 0 3:20:57 AM #46 Text 0 File BurnAtOnceRecorder.cpp, Line 2989 Writing VIDEO_TS.IFO at sector 544 3:20:57 AM #47 Text 0 File BurnAtOnceRecorder.cpp, Line 3217 Writing VIDEO_TS.VOB at sector 560 3:20:57 AM #48 Text 0 File BurnAtOnceRecorder.cpp, Line 3017 Writing VIDEO_TS.BUP at sector 608 3:21:57 AM #49 Phase 177 File APIProgress.cpp, Line 275 Disc finalized successfully 3:21:57 AM #50 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 3:21:57 AM #51 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 3:21:57 AM #52 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 3:22:01 AM #53 Phase 37 File APIProgress.cpp, Line 275 Burn process completed successfully at 16x (22,160 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 02/05/2007 2:04:15 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 1:54:32 PM NT-SPTI used Nero API version: 6.6.1.15 Using interface version: 6.6.0.14 Installed in: C:\Program Files\Ahead\Nero\ Application: ahead\NeroVision Internal Version: 6, 6, 1, 15 Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: Off DiskPeripheral : ST340810A atapi Port 0 ID 1 DMA: Off CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: Off CdRomPeripheral : SAMSUNG CD-R/RW SW-248F atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === SAMSUNG CD-R/RW SW-248F E: CDRom1 LITE-ON DVDRW SOHW-1693S F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 759MB (777752kB) Free physical memory: 520MB (532524kB) Memory in use : 31 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.7.2007 NeroAPI 6:01:16 AM #1 Phase 111 File APIProgress.cpp, Line 275 DVD-Video files sorted 6:01:17 AM #2 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 6:01:17 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 6:01:17 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 6:01:17 AM #5 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 6:48:26 AM #6 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 6:48:26 AM #7 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: LITE-ON DVDRW SOHW-1693S Medium not present 6:48:26 AM #8 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD DL.) 6:48:26 AM #9 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
