I'm running Windows XP and recently reformatted my system to get a clean start. However, now I can not burn DVD or CD's. I have tried a few different versions of Nero to no luck. Here is the error log. Can anyone help? It's driving me mad, I'm just trying to backup a couple files. All my hardware and software is the same as before. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:32 AM Nero Version: 6.6.0.14 Internal Version: 6, 6, 0, 14d Recorder: <SONY DVD RW DRU-810A> Version: 1.0f - HA 3 TA 0 - 6.6.0.14 Adapter driver: <atapi> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD-ROM DDU1615 >Version: GYS1 - HA 3 TA 1 - 6.6.0.14 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : ST3160812AS atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y160P0 atapi Port 2 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 3 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 3 ID 1 DMA: On DiskPeripheral : iomega jaz 2GB E.17 aic78xx Port 4 ID 4 DMA: Off DiskPeripheral : IOMEGA ZIP 100 E.08 aic78xx Port 4 ID 5 DMA: Off === CDRom-Device-Map === SONY DVD RW DRU-810A H: CDRom0 SONY DVD-ROM DDU1615 I: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523500kB) Free physical memory: 126MB (129420kB) Memory in use : 75 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0)
Sorry, didn't realize I failed to copy the whole thing. 30.12.2007 CD Image 9:36:36 PM #1 Text 0 File Reader.cpp, Line 127 Reader running 9:36:36 PM #2 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-810A running 9:36:36 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as TAO. MTYP: Mediumtype = CD (old format) (0x1) Image file name: <C:\Temp\Image.nrg> 9:36:36 PM #4 Text 0 File Burncd.cpp, Line 3230 Turn on Track-At-Once, using CD-R/RW media 9:36:37 PM #5 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 359845 ( 79:59.70) Last address to be written: 187430 ( 41:41.05) 9:36:37 PM #6 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 9:36:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: SONY DVD RW DRU-810A; CDR code: 00 97 32 19; OSJ entry from: Prodisc Technology Inc. ATIP Data: Special Info [hex] 1: E0 00 B0, 2: 61 20 13 (LI 97:32.19), 3: 4F 3B 47 (LO 79:59.71) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 9:36:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:36:37 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, Joliet) 2 indices, index0 (150) not provided original disc pos #0 + 187431 (187431) = #187431/41:39.6 relocatable, disc pos for caching/writing not required/not required, patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 187429 blocks [SONY DVD RW DRU-810A] -------------------------------------------------------------- 9:36:37 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DRU-810A] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 384165888, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 187431 | lead-out | 1 | 0x41 | 0x00 9:36:37 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1111 Removed 2 run-out blocks from end of track 1. Length: 187431 -> 187429. 9:36:37 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 9:36:37 PM #13 Text 0 File Burncd.cpp, Line 4114 Cache writing successful. 9:36:37 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 9:36:37 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 40x (6,000 KB/s) 9:36:37 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, no disc pos, patch infos, orig at #0): write at #0 9:36:37 PM #17 Text 0 File Mmc.cpp, Line 21592 Set BUFE: Power-Burn -> OFF 9:37:31 PM #18 SCSI -1015 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x04510000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x73 0x02 9:37:31 PM #19 CDR -1015 File Writer.cpp, Line 311 Calibration area full 9:37:32 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 9:37:32 PM #21 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 9:37:32 PM #22 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state SONY DVD RW DRU-810A\H3 T0 9:37:32 PM #23 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 9:37:32 PM #24 Text 0 File Mmc.cpp, Line 16240 <SONY DVD RW DRU-810A > start Close Session 9:37:32 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 40x (6,000 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\atapi.sys': Ver=5.1.2600.3264 (xpsp.071130-1425), size=96512 bytes, created 11/30/2007 5:24:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Try updating your Nero from here 6.6.1.15 http://www.filehippo.com/download/7717bb2aa35a8a6b405b8322e5dfe50b/download/ In my opinion, these are not top quality discs...try slowing your burn to 32X I cant advise on your firmware at the moment my source is unavailable. I will check this error out and reply asap. EDIT: Heres something I found on the error
I would like to add to the list of tasks/advice that Gwendolin gave you: Your burner's lenses could be dirty; get a can of compressed air for electronics and blow off any possible junk- cigarette smoke, dust... Also, here is a link to something you might want to try also. I found that "fix" in several forums, it seems to work for many people that have the "power calibration" stinker: http://www.gidforums.com/t-1805.html
I updated the firmware cleaned it with some air, and made the adjustment from that last poster. I tried burning on a Verbatim DVD and got the following error log. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 10:35:32 AM Nero Version: 6.6.0.14 Internal Version: 6, 6, 0, 14d Recorder: <SONY DVD RW DRU-810A> Version: 1.0f - HA 3 TA 0 - 6.6.0.14 Adapter driver: <atapi> HA 3 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD-ROM DDU1615 >Version: GYS1 - HA 3 TA 1 - 6.6.0.14 Adapter driver: <atapi> HA 3 === Scsi-Device-Map === DiskPeripheral : ST3160812AS atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 6Y160P0 atapi Port 2 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 3 ID 0 DMA: On CdRomPeripheral : SONY DVD-ROM DDU1615 atapi Port 3 ID 1 DMA: On DiskPeripheral : iomega jaz 2GB E.17 aic78xx Port 4 ID 4 DMA: Off DiskPeripheral : IOMEGA ZIP 100 E.08 aic78xx Port 4 ID 5 DMA: Off === CDRom-Device-Map === SONY DVD RW DRU-810A H: CDRom0 SONY DVD-ROM DDU1615 I: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523500kB) Free physical memory: 73MB (75436kB) Memory in use : 85 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 31.12.2007 ISO compilation 11:49:23 PM #1 Text 0 File Isodoc.cpp, Line 6314 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:49:23 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 11:49:23 PM #3 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-810A running 11:49:23 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3297 First writeable address = 0 (0x00000000) 11:49:23 PM #5 Text 0 File Burncd.cpp, Line 3230 Turn on Disc-At-Once, using DVD media 11:49:24 PM #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2255407 (501:12.07, 4405MB) 11:49:24 PM #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 11:49:24 PM #8 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: SONY DVD RW DRU-810A, Media type: DVD+R 11:49:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:49:24 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2255408 (2255408) = #2255408/501:12.8 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2255408 blocks [SONY DVD RW DRU-810A] -------------------------------------------------------------- 11:49:33 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4619075584, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2255408 | lead-out | 1 | 0x41 | 0x00 11:49:33 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:49:33 PM #13 Text 0 File Burncd.cpp, Line 4114 Cache writing successful. 11:49:33 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:49:33 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 11:49:33 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:49:33 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x04380600 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 11:49:33 PM #18 CDR -1207 File DVDR.cpp, Line 4938 Book Type automatically set to: Current recorder setting 11:49:33 PM #19 Text 0 File DVDPlusRW.cpp, Line 655 Start write address at LBA 0 DVD high compatibility mode: Yes 11:58:43 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x034B0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x15 0x0D 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x0C 0x00 11:58:43 PM #21 CDR -1135 File Writer.cpp, Line 311 Write error 11:58:43 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:58:43 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:59:25 PM #24 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'Drivers\atapi.sys': Ver=5.1.2600.3264 (xpsp.071130-1425), size=96512 bytes, created 11/30/2007 5:24:44 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Do you have another pc you can try this drive in? Did you check out that link cyprusrom linked to about imapi?
No other PC, and yes I tried his recommendation. I'm leaning to either it has gone bad or the cables are bad. I ran Sony's test and it failed and generated an error report I emailed to them.
It may just be on the way out like you said. If you did have another pc handy that would be another way to tell. You might want to try just have the dvd burner hooked up - disconnect the the DVD Rom and see if that makes a diff. You best bet may be just to replace it.
