Hope I can get some help.I have been trying to burn a dvd using Nero and don't have a clue why it won't work. This is the error report. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 16/07/2002 9:03:20 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM Nero version: 6.3.1.13 (Nero Express) Recorder: <HP DVD Writer 420n> Version: 1.33 - HA 1 TA 1 - 6.3.1.13 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST RW/DVD GCC-4320B>Version: 1.03 - HA 1 TA 0 - 6.3.1.13 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD600AB-22CBA1 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST RW/DVD GCC-4320B atapi Port 1 ID 0 DMA: Off CdRomPeripheral : HP DVD Writer 420n atapi Port 1 ID 1 DMA: On CdRomPeripheral : XU7483O JUJ251I 1.0 dtscsi Port 3 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST RW/DVD GCC-4320 E: CDRom0 HP DVD Writer 420n F: CDRom1 XU7483O JUJ251I H: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 766MB (784920kB) Free physical memory: 506MB (518632kB) Memory in use : 33 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 18.1.2008 ===== Disc-Copy over image - 1st step : Copy to image ... 6:03:56 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 6:03:56 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 6:03:56 PM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 1635760 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 6:03:56 PM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 1635760 = 1635760, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 6:03:56 PM #5 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-at-once, using DVD media 6:03:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 1635759 (363:30.09, 3194MB) 6:03:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 6:03:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 6:03:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:03:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1635760 (1635760) = #1635760/363:30.10 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1635760 blocks [ Image Recorder ] -------------------------------------------------------------- 6:03:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 3350343680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1635760 | lead-out | 1 | 0x00 | 0x41 6:03:56 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 6:03:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2342 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:25:05 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05241000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x16 0xB0 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 6:25:12 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05241000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x16 0xB0 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 6:25:12 PM #16 TRANSFER -25 File Reader.cpp, Line 371 Error reading data 6:25:12 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:25:13 PM #18 Phase 67 File dlgbrnst.cpp, Line 1836 Burn process failed ===== Disc-Copy over image - 2nd step : Burn the image ... 6:03:56 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 6:03:56 PM #2 Text 0 File Writer.cpp, Line 124 Writer Image Recorder running 6:03:56 PM #3 Text 0 File DVDCopy.cpp, Line 263 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 1635760 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 6:03:56 PM #4 Text 0 File DVDCopy.cpp, Line 355 Max -1 tracks of 1 allowed to copy 1: 0 - 1635760 = 1635760, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 6:03:56 PM #5 Text 0 File Burncd.cpp, Line 3167 Turn on Disc-at-once, using DVD media 6:03:56 PM #6 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2147483646 (477218:35.21, 4194303MB) Last address to be written: 1635759 (363:30.09, 3194MB) 6:03:56 PM #7 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 6:03:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 6:03:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 6:03:56 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1635760 (1635760) = #1635760/363:30.10 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1635760 blocks [ Image Recorder ] -------------------------------------------------------------- 6:03:56 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 982 Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 3350343680, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1635760 | lead-out | 1 | 0x00 | 0x41 6:03:56 PM #12 Phase 120 File dlgbrnst.cpp, Line 1836 Creating the image for burning 6:03:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2342 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 6:25:05 PM #14 SCSI -1128 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05241000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x16 0xB0 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 6:25:12 PM #15 SCSI -1128 File Cdrdrv.cpp, Line 1441 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05241000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 0x00 0x00 0x16 0xB0 0xC0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x00 6:25:12 PM #16 TRANSFER -25 File Reader.cpp, Line 371 Error reading data 6:25:12 PM #17 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:25:13 PM #18 Phase 67 File dlgbrnst.cpp, Line 1836 Burn process failed Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 27/03/2007 2:55:32 AM File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 16/07/2002 8:05:10 PM File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 02/11/2002 9:53:04 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 26/07/2007 6:06:18 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Any help would be appreciated.
What exactly are you trying to do ? Are you reading from your hard drive or from one of your DVD drives and trying to burn on the other drive?It seems that your burner is failing to read the data source. What discs are you using? Should enable DMA : http://www.onthegosoft.com/dma_setting_nt.htm
1. Delete your CD-Key and personal info at the top of your log you posted before some bumhole copies it and pastes it into their Nero. 2. What kind of DVD are you trying to burn here? Video, data,... what's the source file? 3. What media are you using? (Brand of blank discs) 4. Have you updated your firmware for both drives?
Firmware has been updated. Dma is on. Memorex blanks. Illegal disc error comes up when I try to burn. If it is vob ,videots, avi, rat, dvd squeeze, data it won't matter, it just won't burn. I can make a vcd no problem but if you are like me, I just want things to work.Thanks
Memorex- no good. Get some Verbatim or Sony discs. If you buy online, get Taiyo Yuden. Also use a DVD lens cleaner.
Memorex is crappola , I agree. Like they say you get what you pay for.I never thought of a lens cleaner, thanks for that. Just out of curiosity , what if anything does that error report that i posted tell you? Thanks again.
Unrecovered Read Error Were you trying to use both drives, read the info from one and burn to the other, or read from the drive and burn the image to the HD? It looks like a read error, not a burn/write error.
That's how it looks like... Well, it seems that your drive, the reader, has problems with the disc. Try using for example ImgBurn or DVD Decrypter to rip the disc to your hard drive and then burn it. nero is not a very good ripper, it doesn't handle well faulty discs. You might not be able to copy that disc at all if it is in a bad shape. You can have a disc that plays okay, but be hard to rip. This can happen due to a bad burn, burning too fast, too close to the outer edge of the disc, on poor quality media(Memorex). Also you can try switching the drives, use the other one as a reader. Try cleaning the disc. If it is scratched, at your local DVD store you could get it re-polished for a couple of bucks.
I think my problem was burning on the fly.I tried reading from the dvd burner first, then burning and it worked fine even with the craptastic memorex. Thanks for your help. I should be ok now.
Burning "on the fly" is not that easy. If your both DVD drives are on the same channel...not good. It is recommended they are set-up on different IDE channels to burn on the fly. The reader needs to be fast enough to keep up with the burner. Any little disturbance in the flow of information, will give you an error...
hi, i was wondering if you would be able to send me the driver to your LG burner. I also have a GCC-4320b and been searching hi and low for the driver. LG doesnt seem to host it and driver sites dont seem to have it either.
thanks. unfortunately no drivers, just firmwares. Or do the firmwares contain the driver within the installation?
