I am constantly going through probelms and burning failure with NERO it gets to about 65% then says burn fail i have pasted the error report below can anyone help please. Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 16/12/2003 8:18:06 PM Nero version: 6.3.1.17 (Nero Express) Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.15 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.15 - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : TOSHIBA MK4021GAS atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: Off === CDRom-Device-Map === HL-DT-ST DVD+RW GCA-4040 D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 52428800 (52428800) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 446MB (457712kB) Free physical memory: 132MB (136100kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 29.8.2004 UDF/ISO compilation 2:20:48 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation started 2:20:48 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845 DVD-Video files reallocation completed (no file modified) 2:20:48 PM #3 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 2:20:48 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845 DVD-Video files sorted 2:20:48 PM #5 Text 0 File Reader.cpp, Line 118 Reader running 2:20:48 PM #6 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVD+RW GCA-4040N running 2:20:48 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:20:48 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 2:20:48 PM #9 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using DVD media 2:20:48 PM #10 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1755087 (390:01.12, 3427MB) 2:20:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 2:20:48 PM #12 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R Disc Manufacturer ID: OPTODISC, Media Type ID: OR4, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 2:20:48 PM #13 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= 2:20:48 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 1755088 (1755088) = #1755088/390:1.13 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1755088 blocks [HL-DT-ST DVD+RW GCA-4040N] -------------------------------------------------------------- 2:20:48 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3594420224, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 1755088 | lead-out | 1 | 0x00 | 0x41 2:20:49 PM #16 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 2:20:49 PM #17 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 2:20:49 PM #18 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 2:20:49 PM #19 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 4x (5,540 KB/s) 2:20:49 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 2:20:49 PM #21 Text 0 File Cdrdrv.cpp, Line 8128 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: OPTODISC Media type ID: OR4 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 01 4F 50 54 4F 44 - 49 53 43 4F 52 34 00 38 ...OPTODISCOR4.8 23 54 37 18 02 68 72 02 - B0 67 15 15 0B 0A 08 08 #T7..hr..g...... 01 1B 1D 0B 0B 11 12 01 - 00 00 00 00 00 00 00 00 ................ 2:20:49 PM #22 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 11:05,961 (665961ms) -> OK 2:20:49 PM #23 Text 0 File DVDPlusRW.cpp, Line 613 Start write address at LBA 0 DVD high compatibility mode: Yes 3:13:00 PM #24 SCSI -1039 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x05F00000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x2A 0x00 0x00 0x11 0x14 0x60 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x09 0x01 3:13:00 PM #25 CDR -1039 File Writer.cpp, Line 304 Focus or tracking error 3:13:00 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 3:13:00 PM #27 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 3:13:00 PM #28 SCSI -1039 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x09 0x01 3:13:00 PM #29 SCSI -1023 File Cdrdrv.cpp, Line 1188 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x2C Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x06 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E 0x00 0x00 0x00 0x00 0x2C 0x00 3:13:00 PM #30 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 3:13:00 PM #31 CDR -1039 File WriterStatus.cpp, Line 164 Focus or tracking error HL-DT-ST DVD+RW GCA-4040N\H1 T0 3:13:00 PM #32 TRANSFER -24 File WriterStatus.cpp, Line 164 Could not perform end of Disc-at-once 3:13:00 PM #33 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 3:13:00 PM #34 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\InCDfs.SYS': Ver=4, 1, 0, 1, size=91712 bytes, created 13/02/2004 8:40:54 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 1, 0, 1, size=28752 bytes, created 13/02/2004 8:40:54 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 1, 0, 1, size=9341 bytes, created 13/02/2004 8:40:54 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/08/2004 3:59:42 PM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi, It appears your burner doesn't have DMA enabled which isn't a good thing since burning a DVD requires the high transfer speeds that DMA provides. This link will show you how to check your DMA settings and change them if needed: http://www.microsoft.com/whdc/device/storage/IDE-DMA.mspx If you still can't get your drive into DMA it may help to uninstall the drive through Device Manager by following these steps, Go to Device Manager > Expand the tree for DVD/CD ROM Drives > Find the drive in question, right click it and go to Properties > Under the Driver tab, select Uninstall then OK. Now reboot and Windows should detect and reinstall the drive. Let us know if this helps
i also see at the bottom of your log you have incd installed which causes burning related problems , you could try to uninstall that software and see if that helps along with switching your drive to dma mode . hope that helps
[bold]megs8888[/bold] Ooooops , edit your original post and remove your SERIAL NUMBER at the beginning ! a focus error is often caused by bad/dirty media or a dirty lens on the writing head. _X_X_X_X_X_[small]Do It Right , and you will be a Happy Camper ![/small]
