I use to be able to burn dvd's but now I can't. Everytime i burn a cd it stops burning at 88% what could be the problem? 1K22-0867-0795-66M4-5174-0095-**** 8K24-4225-1105-EKK5-5000-0021-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 8.1.1.0 Internal Version: 8, 1, 1, 0 Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0Y - HA 1 TA 0 - 8.1.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: <LITE-ON DVDRW SOHW-1633S>Version: BS0Y - HA 1 TA 0 - 8.1.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 4D080H4 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1633S atapi Port 1 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW SOHW-1633S D: CdRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523808kB) Free physical memory: 311MB (319156kB) Memory in use : 39 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.11.2007 Burn DVD Image 12:56:13 PM #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 12:56:13 PM #2 Text 0 File Burncd.cpp, Line 3530 Turn on Disc-At-Once, using DVD media 12:56:13 PM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1691231 (375:49.56, 3303MB) 12:56:13 PM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 12:56:13 PM #5 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R Disc Manufacturer ID: <SONY16> <D1> Disc Application Code: 64, Disc Physical Code: 193 12:56:13 PM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:56:13 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 785 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1691232 (1691232) = #1691232/375:49.57 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1691232 blocks [D: LITE-ON DVDRW SOHW-1633S] -------------------------------------------------------------- 12:56:13 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [D: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3463643136, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1691232 | 1691232 | 0x00 1691232 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 12:56:13 PM #9 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 12:56:13 PM #10 Text 0 File Burncd.cpp, Line 4316 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 12:56:13 PM #11 Phase 24 File dlgbrnst.cpp, Line 1764 Caching of files started 12:56:13 PM #12 Text 0 File Burncd.cpp, Line 4435 Cache writing successful. 12:56:13 PM #13 Phase 25 File dlgbrnst.cpp, Line 1764 Caching of files completed 12:56:13 PM #14 Phase 36 File dlgbrnst.cpp, Line 1764 Burn process started at 4x (5,540 KB/s) 12:56:13 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2735 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:56:13 PM #16 Text 0 File DVDR.cpp, Line 3245 Recording mode: Sequential Recording Mode 12:56:13 PM #17 Text 0 File DVDR.cpp, Line 3401 Start write address at LBA 0 DVD high compatibility mode: Yes 12:56:14 PM #18 Text 0 File Cdrdrv.cpp, Line 10026 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) Outer Limit of Data Recordable Area: 0 h Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0, Extended part version: 33 Start PSN of the Extra Border Zone: 0 h Start PSN of Physical format information blocks in Extra Border Zone: 0 h Media Specific [16..783]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 01 40 C1 FD 9E D8 52 00 - 02 84 0E 10 87 88 80 00 .@....R......... 03 53 4F 4E 59 31 36 00 - 04 44 31 00 00 00 00 00 .SONY16..D1..... 05 88 80 00 00 00 01 00 - 06 09 0B 12 A8 88 90 00 ................ 07 88 80 00 00 00 00 00 - 08 06 13 0A 0E 08 04 00 ................ 09 96 06 0C 0B 70 88 00 - 0A 80 00 00 00 00 10 00 .....p.......... 0B 08 18 17 B8 88 85 00 - 0C B6 79 0B B0 33 03 00 ..........y..3.. 0D 30 00 D0 00 00 00 00 - 0E 0A 20 3B 37 29 1E 00 .0.........;7).. 0F 50 1D 2B 15 AA B5 00 - 10 88 80 00 00 00 00 00 .P.+............ 11 00 00 00 00 00 00 00 - 12 0A 2D 39 35 2B 1D 00 ..........-95+.. 13 50 1F 2D 19 98 B5 00 - 14 88 80 00 00 00 00 00 .P.-............ 15 00 00 00 00 00 00 00 - 16 09 3A 45 40 2E 27 00 ..........:E@.'. 17 80 21 2E 1F 78 B5 00 - 18 88 8C 00 0C 00 0C 00 ..!..x.......... 19 00 00 00 00 00 00 00 - 1A 09 4F 47 46 38 26 00 ..........OGF8&. 1B 70 21 2D 1B 67 C5 00 - 1C 88 84 00 04 00 04 00 .p!-.g.......... 1D 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:56:14 PM #19 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 74390400 12:56:41 PM #20 Text 0 File Cdrdrv.cpp, Line 1367 12:56:41.265 - 㩄䰠呉ⵅ乏䐠䑖坒匠䡏ⵗ㘱㌳S : Queue again later 1:29:40 PM #21 SPTI -600 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x04b7bdc0: Len xc 1:29:56 PM #22 SPTI -1066 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x2A 00 00 16 5E 20 00 00 20 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x091a7080: Len x10000 0x13 02 01 10 D2 11 CD 31 FF 03 2F 22 EC 00 DF FE 0x23 02 02 3D 11 4C FD D4 DF 33 0C 02 FF F4 DF F3 0x11 02 0E 15 31 12 11 01 10 E0 22 0F D0 10 1D 1F 1:29:56 PM #23 CDR -1066 File Writer.cpp, Line 306 Invalid field in command D: LITE-ON DVDRW SOHW-1633S 1:30:18 PM #24 Text 0 File DVDR.cpp, Line 3803 EndDAO: Last written address was 1465887 (165E1Fh) 1:30:18 PM #25 CDR -1114 File WriterStatus.cpp, Line 162 Reset occurred D: LITE-ON DVDRW SOHW-1633S 1:30:18 PM #26 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 1:30:18 PM #27 Phase 38 File dlgbrnst.cpp, Line 1764 Burn process failed at 4x (5,540 KB/s) 1:30:18 PM #28 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:30:20 PM #29 Text 0 File Cdrdrv.cpp, Line 11276 DriveLocker: UnLockVolume completed 1:30:20 PM #30 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
my dvd burner is on the secondare ide channel. I wasn't able to change it to dma mode. I uninstalled still did not do the trick. What could be the problem? the current transfer mode says pio mode.
uninstalled the both of the ide controllers 5 times still i could not change the pio mode to dma mode. Could it be the burner itself? I hope i don't have to buy a new one.
