Can't back up DVD in Nero (Write Errors) - Bit clueless! Help please

Discussion in 'Nero discussion' started by Groovyreg, Jul 30, 2005.

  1. Groovyreg

    Groovyreg Member

    Joined:
    Jul 30, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Hello tech-types. I'm trying to back up DVD's with Nero and I'm getting failure upon failure. After looking on other posts on this forum I have downloaded the Dynamic control reg patch thingy from Nero and checked the firmware on my DVD writer. Some progress: It got to 6% instead of only 1% but this is still not too great.

    Here's the log of the burn:

    Joe
    GroovyReg

    Windows XP 5.1
    IA32
    WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
    Nero Version: 6.6.0.14
    Internal Version: 6, 6, 0, 14d

    Recorder: <DVDRW IDE1008> Version: 0060 - HA 1 TA 0 - 6.6.0.14
    Adapter driver: <atapi> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <DVDRW IDE1008 >Version: 0060 - HA 1 TA 0 - 6.6.0.14
    Adapter driver: <atapi> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On
    DiskPeripheral : SAMSUNG SP0802N atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : DVDRW IDE1008 atapi Port 1 ID 0 DMA: Off
    CdRomPeripheral : HL-DT-ST CD-RW GCE-8320B atapi Port 1 ID 1 DMA: On

    === CDRom-Device-Map ===
    DVDRW IDE1008 D: CDRom0
    HL-DT-ST CD-RW GCE-8320B E: CDRom1
    =======================

    AutoRun : 0
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 693MB (710592kB)
    Memory in use : 32 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    30.7.2005
    Burn DVD Image
    13:26:07 #1 Text 0 File Reader.cpp, Line 127
    Reader running

    13:26:07 #2 Text 0 File Writer.cpp, Line 122
    Writer DVDRW IDE1008 running

    13:26:07 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
    Image was written as DAO.
    DAOI:
    MediaCatalogNumber = ''
    TocType = 0x40
    Finalized = 1
    First/Last Track = 1 / 1
    1: ISRC = ''
    Blocksize = 2048
    TrackMode = 'TRM_DATA_MODE1'
    TrackConfig = 0x00
    First/Last Index = 0 / 1
    Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4538640384
    CUES:
    0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
    2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
    3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=492:28.33 ( 2216133) RecDep=0x00
    MTYP: Mediumtype = DVD (old format) (0x1C)
    Image file name: <C:\Joe's Stuff\DVD\Watership Down.nrg>

    13:26:07 #4 Text 0 File Burncd.cpp, Line 3230
    Turn on Disc-At-Once, using DVD media

    13:26:07 #5 Text 0 File DlgWaitCD.cpp, Line 267
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2216132 (492:28.32, 4328MB)

    13:26:07 #6 Text 0 File DlgWaitCD.cpp, Line 279
    Write in overburning mode: NO (enabled: CD)

    13:26:07 #7 Text 0 File DlgWaitCD.cpp, Line 2433
    Recorder: DVDRW IDE1008, Media type: DVD+R
    Disc Manufacturer ID: PRODISC, Media Type ID: R03, Product revision number: 3
    Disc Application Code: 0, Extended Information Indicators: 3

    13:26:07 #8 Text 0 File DlgWaitCD.cpp, Line 445
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    13:26:07 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (1 - DVD-ROM)
    2 indices, index0 (150) not provided
    original disc pos #0 + 2216133 (2216133) = #2216133/492:28.33
    not relocatable, disc pos for caching/writing not required/not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2216133 blocks [DVDRW IDE1008]
    --------------------------------------------------------------

    13:26:07 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
    Prepare recorder [DVDRW IDE1008] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x40; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4538640384, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0x00
    0 | 1 | 0 | 0x41 | 0x00
    0 | 1 | 1 | 0x41 | 0x00
    2216133 | lead-out | 1 | 0x41 | 0x00

    13:26:07 #11 Phase 36 File dlgbrnst.cpp, Line 1832
    Burn process started at 4x (5,540 KB/s)

    13:26:08 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    13:26:08 #13 Text 0 File Cdrdrv.cpp, Line 8821
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 3 h
    Disc Manufacturer ID: PRODISC.
    Media type ID: R03
    Product revision number: 3
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 03 50 52 4F 44 49 - 53 43 00 52 30 33 03 38 ...PRODISC.R03.8
    23 54 37 0F 02 54 6B 02 - 94 63 15 15 0B 0A 08 08 #T7..Tk..c......
    01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................

    13:26:08 #14 Text 0 File DVDR.cpp, Line 5583
    Drive: DVDRW IDE1008
    Book Type request [BTC]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    13:26:08 #15 CDR -1211 File DVDR.cpp, Line 4929
    Book Type set to: DVD-ROM

    13:26:08 #16 Text 0 File DVDPlusRW.cpp, Line 655
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    14:01:57 #17 SCSI -1135 File Cdrdrv.cpp, Line 1436
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04020000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x01 0x9E 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    14:01:57 #18 CDR -1135 File Writer.cpp, Line 311
    Write error

    14:01:57 #19 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion

    14:01:57 #20 Text 0 File ThreadedTransfer.cpp, Line 222
    conversion idle, stopping reader

    14:01:59 #21 Phase 127 File dlgbrnst.cpp, Line 1832
    Generating DVD high compatibility borders

    14:03:43 #22 Phase 129 File dlgbrnst.cpp, Line 1832
    Generating DVD borders completed successfully

    14:03:43 #23 Text 0 File DVDR.cpp, Line 5583
    Drive: DVDRW IDE1008
    Book Type request [BTC]: DVD+R
    Changing the Book Type was finished successfully, return code 0

    14:03:43 #24 Phase 38 File dlgbrnst.cpp, Line 1832
    Burn process failed at 4x (5,540 KB/s)


    Existing drivers:
    File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
    File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 22:59:44 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

    I'm a complete beginner at this stuff so please go slowly with any explaination you may be kind enough to post.
    Thanks a lot.
     
    Last edited: Jul 30, 2005
    Groovyreg, Jul 30, 2005
    #1
  2. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    hiya, welcome to afterdawn.
    first of all edit your post quickly (pencil icon at top right of your post), and EDIT OUT your serial number which begins with '1A22'.

    i am looking thru your logfile now...
     
    creaky, Jul 30, 2005
    #2
  3. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    @Groovyreg - nice one, see you've edited out the serial number in the meantime. i've had a look thru rest if logfile -

    - version 0060 of your firmware was up to date here - http://forums.afterdawn.com/thread_view.cfm/193674. However this drive would appear to be inferior - see the link for a load of info/other links re that drive

    - DMA needs to be ON, fix it like this - http://home.comcast.net/~bbmayo/FAQ.htm

    - i don't these discs so won't comment

    - splat!
     
    creaky, Jul 30, 2005
    #3
  4. Groovyreg

    Groovyreg Member

    Joined:
    Jul 30, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Thankyou Creaky.
    I've updated Nero to the latest versions and am going to run the SMCPatch (should I?). My primary IDE channel is set to Ultra DMA mode 5 but my secondary is set to PIO on device 0 but Multi-word DMA Mode 2 on device 1. Should I uninstall both the primary and secondary IDE's? Is this in any way dangerous?
    I'll wait for another post from you before I do anything else. Do you need any other system info?
    When I hear back I'll follow your advice and give it another go but if I have further problems should I continue on this post or start another?

    I'm sure glad that whoever your employer is leaves you alone long enough to help the whole web with there (many) nero problems!
     
    Groovyreg, Jul 30, 2005
    #4
  5. Groovyreg

    Groovyreg Member

    Joined:
    Jul 30, 2005
    Messages:
    4
    Likes Received:
    0
    Trophy Points:
    11
    Problem now solved. Thanks a lot to creaky for valuable assistance. Praise be to all tech-types who monitor the web for us clueless people!
     
    Groovyreg, Jul 30, 2005
    #5
  6. creaky

    creaky Moderator Staff Member

    Joined:
    Jan 14, 2005
    Messages:
    27,900
    Likes Received:
    1
    Trophy Points:
    96
    no worries, you're welcome, happy burning...
     
    creaky, Jul 30, 2005
    #6

Share This Page