Hi guys I do have also and don't know how to correct it. Yesterday I just burn a single ISO CD with Nero...after that the program would just fail... I thought..that I have contacted a virus somewhere in the web and run all the things that I can to eliminate it... but still when I write a CD it will fail after 1 to 2% I don't know why??? :sad: Yesterday it was just fine... And after that a message that will come out saying : Error 1316 SCSI command aborted. Then my ASPI driver won't function... but I corrected it by using FORCEASPI and when I tried to burn a CD >>NO SUCCESS<< This is the Aspichk image since i chk mine: And when I open my Nero I burn it...and this is the image: The log is: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM ahead WinASPI: File 'Crogram FilesaheadNeroWnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM Nero version: 6.3.1.17 Recorder: <CyberDrv CW078D CD-R/RW> Version: 130D - HA 1 TA 0 - 6.3.1.17 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8161B>Version: 0102 - HA 0 TA 1 - 6.3.1.17 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === DiskPeripheral : Maxtor 2F040L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 0 ID 1 DMA: On CdRomPeripheral : CyberDrv CW078D CD-R/RW atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVD-ROM GDR8161 E: CDRom0 CyberDrv CW078D CD-R/RW D: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 19922944 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 95MB (97776kB) Free physical memory: 13MB (13884kB) Memory in use : 85 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 31.7.2004 CD-ROM (ISO) 7:15:54 AM #1 Text 0 File Isodoc.cpp, Line 6065 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 7:15:54 AM #2 Phase 88 File dlgbrnst.cpp, Line 1845 ExacLink activated 7:15:55 AM #3 Text 0 File Reader.cpp, Line 118 Reader running 7:15:55 AM #4 Text 0 File Writer.cpp, Line 124 Writer CyberDrv CW078D CD-R/RW running 7:15:55 AM #5 ISO9660GEN -11 File geniso.cpp, Line 3899 First writeable address = 0 (0x00000000) 7:15:55 AM #6 Text 0 File Burncd.cpp, Line 3172 Turn on Disc-at-once, using CD-R/RW media 7:16:15 AM #7 Text 0 File DlgWaitCD.cpp, Line 245 Last possible write address on media: 359846 ( 79:59.71) Last address to be written: 358502 ( 79:42.02) 7:16:15 AM #8 Text 0 File DlgWaitCD.cpp, Line 257 Write in overburning mode: NO (enabled: CD) 7:16:15 AM #9 Text 0 File DlgWaitCD.cpp, Line 2137 Recorder: CyberDrv CW078D CD-R/RW; CDR code: 00 97 27 06; OSJ entry from: DIGITAL STORAGE TECHNOLOGY CO.,LTD ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 06 (LI 97:27.06), 3: 4F 3B 48 (LO 79:59.72) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 7:16:15 AM #10 Text 0 File DlgWaitCD.cpp, Line 418 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) 7:16:15 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original disc pos #0 + 358503 (358503) = #358503/79:40.3 relocatable, disc pos for caching/writing not required/required, no patch infos -> TRM_ULTRARAW96_MODE1, 2448, config 0x4, wanted index0 0 blocks, length 358503 blocks [CyberDrv CW078D CD-R/RW ] -------------------------------------------------------------- 7:16:15 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984 Prepare recorder [CyberDrv CW078D CD-R/RW ] for write in raw writing DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_ULTRARAW96_MODE1, 2448/0x04, FilePos 0 367200 877982544, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ -150 | lead-in | 0 | 0x00 | 0x41 -150 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 358503 | lead-out | 1 | 0x00 | 0x41 7:16:17 AM #13 Phase 24 File dlgbrnst.cpp, Line 1845 Caching of files started 7:16:17 AM #14 Text 0 File Burncd.cpp, Line 4182 Cache writing successful. 7:16:17 AM #15 Phase 25 File dlgbrnst.cpp, Line 1845 Caching of files completed 7:16:17 AM #16 Phase 36 File dlgbrnst.cpp, Line 1845 Burn process started at 8x (1,200 KB/s) 7:16:18 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2344 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:16:18 AM #18 Text 0 File Mmc.cpp, Line 15786 StartDAO : CD-Text - Off 7:16:18 AM #19 Text 0 File Mmc.cpp, Line 20401 Set BUFE: ExacLink -> ON 7:16:32 AM #20 SCSI -1093 File Cdrdrv.cpp, Line 1442 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04850000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x30 CDB Data: 0x2A 0x00 0xFF 0xFF 0xD5 0x8F 0x00 0x00 0x1A 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x02 0x30 7:16:32 AM #21 CDR -1093 File Writer.cpp, Line 304 No seek complete 7:16:32 AM #22 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 7:16:32 AM #23 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 7:16:35 AM #24 Text 0 File dlgbrnst.cpp, Line 1703 Set remaining time: 0:00,000 (0ms) -> OK 7:16:35 AM #25 Phase 38 File dlgbrnst.cpp, Line 1845 Burn process failed at 8x (1,200 KB/s) Existing drivers: File 'DriversASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM File 'WNASPINT.DLL': Ver=V1.14, size=68608 bytes, created 1/27/2002 12:00:00 AM File 'DriversPXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 10/28/2003 5:02:00 PM (Prassi/Veritas driver for win 2K) File 'Driversatapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 12:27:50 AM (Adapter driver for rec) Registry Keys: HKLMSoftwareMicrosoftWindows NTCurrentVersionWinLogonAllocateCDROMs : 0 (Security Option) ******************************************************* What do I need to do...? Can someone help??? TNX
Didn't read your whole log transcript there, but I experienced the same problem once. Maybe this is not the same solution, but what I realized was that one of my two internal hard drive partitions had the DMA-access (the C: Drive) turned off (which I figured out was a bug related to some other software). that caused the hard drive to run extremely slow and eventually, I think, aborting burning the CD. You can check the DMA setting under SYSTEM SETTINGS -> SYSTEM -> then click the HARDWARE button -> and then the HARDWARE MANAGER thing -> and finally click the IDE ATA-devices and then one of the menubuttons to check DMA-setting. It should say "ultra" or something. NOT "PIO"... I don't know... what I did was then was test burning data from my D: partition and it all went fine compared to the C: drive and so I figured out I had to reinstall XP to manage to re-set the DMA-setting. But the problem was similar to your. If you experienced some genereal slowness to the drive from which you are burning the CD then this might be the problem.
Tnx on your reply... even me myself can't expect this to happen... before it happened...i was about finished burning 1 CD and the next is the FAILED one! So what I did... I tried to Re-format & Re-install the XP in my PC and tried to write again... but still no success... so finally what I did is that, I went to my friend and borrowed his Internal LG CD-RW and install it to my PC... and tried it if it will burn a CD... and gues what???!!!! It did burn a CD! What do you think is the cause??!! Is it my CyberDrive CD-RW or my PC or my SOftware :???: What do you think?
hi, nah then I really don't know either. since you reinstalled Windows I guess it have to be hardware failure then... try burning CDs from some different brands to check that your drive don't have problems with som low-quality discs or something? sorry. good luck.
