Hi can anybody help I built a new pc and transfered all my data via Ghost, everything else is working except my flash xp below is the message: Connecting to xbox Connected to 192.168.1.99 Port 21 220 Please enter your login name now. USER xbox 331 Password required for xbox. PASS (hidden) 230 User xbox logged in , proceed. SYST 215 UNIX Type: L8 REST 100 502 rest is not implemented. This site may not allow file resuming CWD / 250 "/" is current directory. PWD 257 "/" is current directory TYPE A 200 Type set to ASCII. PASV 502 pasv is not implemented. PORT 192,168,1,1,15,206 425 Can't open data connection to 192.168.1.1:52751 Help !!!!
What is the Network settings for your Xbox? (IP, Subnet Mask. Default Gateway) What are the network settings for your NIC card in your computer.(IP, Subnet Mask. Default Gateway) How are you conecting to your Xbox, Router or crossover cbale? Did you keep the Username and password as Xbox when trying to connect?
Hi the settings on my xbox are as follows ip 192.168.1.99 sub 255 255 255 0 default gateway 192.168.1.1 no dns I am using a crossover cable My pc settings are ip 192.168.1.1 sub 255 255 255 0 no other settings and yes I keep my username & password as xbox. cant see why as I can ping the box!!!
Try this and see if it works. Change the Xbox IP to the below. IP 192.168.1.3 sub 255 255 255 0 default gateway 192.168.1.1 Now for your computer try this. ip 192.168.1.2 sub 255 255 255 0 Default gateway 192.168.1.1 then try to connect.
that sounds about right and should work I think the IP addresses have to be close for it to work like the above, if you still can't connect then you may have to set up the connection for sharing. If it is not set up this way there will be conflicts between your internet and Xbox using the same connection.
Couple of questions for you: Can you ping your Xbox? When you fire up your Xbox, does it boot to your chip or your Dashboard? I use Xenium Ice and autoboot to Evox. I have been through all of my dashboards and my modchip settings to make sure that I can communicate with my xbox no matter what I am running. The reason that I ask about a successful ping, is when my xbox has booted without the PC running, it will not connect (then you just restart your xbox). If you can ping your xbox (START-RUN-type "CMD"/type "ping xxx.xxx.x.xxx"), you can forget about the bothersome tunneling and transfer apps. Just use the FTP server built into Windows Explorer. Open Internet Explorer and type this in your address bar. "ftp://xbox:xbox@192.168.1.99" This may be a bit different, as it translates to your configured settings. "ftp://usernameassword@IP.ADD.R.ESS" Sooooo. Yeah. Should be all you need. It is all I have ever needed.
Hi tried the new settings but still this: FlashFXP v2.0 Release Canidate 1 (Debug Version) Online Support Forums http://forum.flashfxp.com WinSock 2.0 Connecting to XBOX Connected to 192.168.1.3 Port 21 220 Please enter your login name now. USER xbox 331 Password required for xbox. PASS (hidden) 230 User xbox logged in , proceed. SYST 215 UNIX Type: L8 REST 100 502 rest is not implemented. This site may not allow file resuming PWD 257 "/" is current directory TYPE A 200 Type set to ASCII. PASV 502 pasv is not implemented. PORT 192,168,1,2,9,228 also tried ftp but would not connect but pinging does!!! Regards Rab
Hi All Ty for all the help, It was Norton thing again!!! even though I had removed Norton IS and ran the norton removal tool some files where hidden deep in registry only by going through each and every item in the reg files was i able to connect. TY Again all Regards rab
