Hi there I've been getting continuous i/o error while trying to burn anything! I started out trying to backup my dvds and it was working for a few then i started getting the errors. My burner is: Pioneer DVD-RW DVR-110D I firstly update the firmware to version 1.41 And i then made sure no other program was running while burning. This worked for 1 or 2 dvds then the error started coming up again. I then tried to just back up some documents and files on my computer and again it worked once and then after that i kept getting the error. I am using Sony DVD-R 16x discs! I've tried using nero, imgburn, dvddecrypter, everything and i get all the same error! I then tried burning at 8x and it works for the first disc of the day, but if i try to burn a second dvd the error comes up This is my latest nero error log file from today: Aaron 1C82-A0K5-19E5-MAAX-400E-8115-**** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.10.1.0 Internal Version: 7, 10, 1, 0 Recorder: <PIONEER DVD-RW DVR-110D>Version: 1.41 - HA 1 TA 0 - 7.10.1.0 Adapter driver: <IDE> HA 1 Drive buffer : 2000kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <JT4092M IJU654R >Version: 2.0B - HA 1 TA 1 - 7.10.1.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : PIONEER DVD-RW DVR-110D atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD3000JB-00KFA0 atapi Port 1 ID 0 DMA: On DiskPeripheral : ST3500630A atapi Port 1 ID 1 DMA: On CdRomPeripheral : JT4092M IJU654R 2.0B adajtcyh Port 2 ID 0 DMA: Off === CDRom-Device-Map === PIONEER DVD-RW DVR-110D E: CdRom0 JT4092M IJU654R K: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048048kB) Free physical memory: 410MB (420404kB) Memory in use : 59 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 4.4.2009 ISO compilation 11:22:57 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 11:22:57 AM #2 Text 0 File Isodoc.cpp, Line 6666 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 11:22:57 AM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343 First writeable address = 0 (0x00000000) 11:22:57 AM #4 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 11:22:58 AM #5 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2293487 (509:39.62, 4479MB) 11:22:58 AM #6 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 11:22:58 AM #7 Text 0 File DlgWaitCD.cpp, Line 2972 Recorder: PIONEER DVD-RW DVR-110D, Media type: DVD-R Disc Manufacturer: SONY16 - D1 Disc Application Code: 64, Disc Physical Code: 193 11:22:58 AM #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:22:58 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2293488 (2293488) = #2293488/509:39.63 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2293488 blocks [E: PIONEER DVD-RW DVR-110D] -------------------------------------------------------------- 11:22:58 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: PIONEER DVD-RW DVR-110D] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4697063424, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2293488 | 0 | 0x00 2293488 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 11:22:58 AM #11 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 11:22:58 AM #12 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 11:22:58 AM #13 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 11:22:58 AM #14 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 11:22:58 AM #15 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 11:22:58 AM #16 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 8x (11,080 KB/s) 11:23:00 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:23:00 AM #18 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 11:23:00 AM #19 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 11:23:00 AM #20 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x0988aa80: Len x648 11:23:00 AM #21 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 6.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 11:23:00 AM #22 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 11:23:01 AM #23 Text 0 File Cdrdrv.cpp, Line 1352 11:23:01.640 - E: PIONEER DVD-RW DVR-110D : Queue again later 11:23:29 AM #24 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 73 03 Buffer x09ae0640: Len x10000 0xBF 3C 4D 12 43 3E 50 5E 0A 83 A5 F6 1E 91 37 A7 0xB9 EE B3 C8 6C CB 02 6A 39 82 44 C4 08 BE D4 00 0x21 44 03 84 C0 20 51 32 4B EF A0 C0 1C 69 74 E8 11:23:29 AM #25 CDR -1106 File Writer.cpp, Line 303 Power calibration error E: PIONEER DVD-RW DVR-110D 11:23:31 AM #26 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 767 (2FFh) 11:23:31 AM #27 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 8x (11,080 KB/s) 11:23:32 AM #28 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 11:23:36 AM #29 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 11:23:36 AM #30 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 1 (Security Option) Please any help will be great! This problem is driving me insane, and i've never had it before! Thanks!
Give a good cleaning. You may have few more burn. Though I believe your burner is dying, even you may have successful burning time to time.
Lens cleaning disc(?) To be honest, I’ve never tried. I do not know how effective it is… There are quite many threads here about cleaning console box lens.
Normally associated with poor media inasmuch as the burner cannot calibrate the required laser power to burn the disk. In this case, cut back the burning speed to 4x then buy some Verbatim disks - that way you eliminate the media from the problem - and you still have a package of good disks.
