Nero 7 Ultra Edition. When i try to copy a CD, I get an error. Something about cannot start disk at once. Here is the log file. desgnr 1C82-***serial number removed by creaky*** Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.7.5.1 Internal Version: 7, 7, 5, 1 (Nero Express) Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS02 - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS02 - HA 1 TA 0 - 7.7.5.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 53073H6 atapi Port 0 ID 0 DMA: On DiskPeripheral : Maxtor 51023H2 atapi Port 0 ID 1 DMA: On CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 0 DMA: On CdRomPeripheral : HP CD-Writer+ 9100 atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === LITE-ON DVDRW SOHW-1673S E: CDRom0 HP CD-Writer+ 9100 F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523568kB) Free physical memory: 319MB (327656kB) Memory in use : 37 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.8.2007 ===== Disc-Copy over image - 1st step : Copy to image ... 8:45:07 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 8:45:08 AM #2 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:45:08 AM #3 Phase 48 File dlgbrnst.cpp, Line 1760 Analyzing disc 8:45:09 AM #4 CDCOPY -1 File CDCopy.cpp, Line 1916 The CD is copyrighted 8:45:13 AM #5 Text 0 File CDCopy.cpp, Line 2132 _Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_ Track 1: 0 0 ( 0:02.00) 148 147 ( 0:03.72) Track 2: 148 450 ( 0:08.00) 354233 354232 ( 78:45.07) 8:45:13 AM #6 Text 0 File CDCopy.cpp, Line 840 Copy options: copy on-the-fly: ON read ISRC/MCN: OFF use jitter correction: OFF data options ignore read error: ON write defekt blocks OFF read raw data: OFF read r-w subchannel data: OFF audio options ignore read error: ON read indexes: OFF read r-w subchannel data: OFF source disc does not look like CD Extra 01. 0 - 298 = 298, data (TRM_DATA_RAW_MODE2, block size 2352) 02. 450 - 354233 = 353783, data (TRM_DATA_RAW_MODE2, block size 2352) 8:45:13 AM #7 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using CD-R/RW media 8:45:13 AM #8 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 445499 ( 99:01.74) Last address to be written: 354232 ( 78:45.07) 8:45:13 AM #9 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 8:45:13 AM #10 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:45:14 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_2336 (1 - Data (mode 2)) 2 indices, index0 (150) not provided original disc pos #0 + 148 (148) = #148/0:1.73 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 148 blocks [Image Recorder] 1: TRM_DATA_MODE2_2336 (2 - Data (mode 2)) 2 indices, index0 (302) not provided original disc pos #450 + 353783 (353783) = #354233/78:43.8 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 353783 blocks [Image Recorder] -------------------------------------------------------------- 8:45:14 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x20; Session Closed, disc fixated Tracks 1 to 2: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 696128, ISRC "" 2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 696128 1401600 827838688, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 148 | -2 | 0x00 0 | 1 | 1 | 0x41 | 148 | 148 | 0x00 148 | 2 | 0 | 0x41 | 353783 | 353931 | 0x00 450 | 2 | 1 | 0x41 | 353783 | 354233 | 0x00 354233 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 8:45:14 AM #13 Phase 120 File dlgbrnst.cpp, Line 1760 Creating the image for burning 8:45:14 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:45:14 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #450): write at #450 8:49:27 AM #16 Text 0 File WriterStatus.cpp, Line 113 <Image Recorder> start writing Lead-Out at LBA 354233 (567B9h), length 0 blocks 8:49:30 AM #17 Phase 121 File dlgbrnst.cpp, Line 1760 Creating Image completed successfully 8:49:37 AM #18 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 8:49:45 AM #19 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 8:49:45 AM #20 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed ===== Disc-Copy over image - 2nd step : Burn the image ... 8:49:54 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 8:49:55 AM #2 Text 0 File Burncd.cpp, Line 3163 LITE-ON DVDRW SOHW-1673S Buffer underrun protection activated 8:49:57 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x20 Finalized = 1 First/Last Track = 1 / 2 1: ISRC = '' Blocksize = 2336 TrackMode = 'TRM_DATA_MODE2_2336' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 350400, NextTrackFilePos = 696128 2: ISRC = '' Blocksize = 2336 TrackMode = 'TRM_DATA_MODE2_2336' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 696128, Index1FilePos = 1401600, NextTrackFilePos = 827838688 CUES: MTYP: Mediumtype = CD (old format) (0x1) Image file name: <C:\Documents and Settings\desgnr\My Documents\TempImage.nrg> 8:49:58 AM #4 Text 0 File Burncd.cpp, Line 3465 Turn on Disc-At-Once, using CD-R/RW media 8:51:35 AM #5 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 359848 ( 79:59.73) Last address to be written: 354232 ( 78:45.07) 8:51:35 AM #6 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 8:51:35 AM #7 Text 0 File DlgWaitCD.cpp, Line 2912 Recorder: LITE-ON DVDRW SOHW-1673S; CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 8:51:35 AM #8 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: CD-R/RW.) 8:51:35 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 823 Setup items (after recorder preparation) 0: TRM_DATA_MODE2_2336 (1 - CD-ROM Mode 2/XA, ISO 9660) 2 indices, index0 (150) provided original disc pos #0 + 148 (148) = #148/0:1.73 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 148 blocks [E: LITE-ON DVDRW SOHW-1673S] 1: TRM_DATA_MODE2_2336 (2 - CD-ROM Mode 2/XA, CD-ROM Mode 1) 2 indices, index0 (302) provided original disc pos #450 + 353783 (353783) = #354233/78:43.8 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 353783 blocks [E: LITE-ON DVDRW SOHW-1673S] -------------------------------------------------------------- 8:51:35 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1026 Prepare [E: LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x20; Session Closed, disc fixated Tracks 1 to 2: Idx 0 Idx 1 Next Trk 1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 700896, ISRC "" 2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 700896 1411200 833508816, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 -150 | 1 | 0 | 0x41 | 148 | -150 | 0x00 0 | 1 | 1 | 0x41 | 148 | 0 | 0x00 148 | 2 | 0 | 0x41 | 353783 | 148 | 0x00 450 | 2 | 1 | 0x41 | 353783 | 450 | 0x00 354233 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 8:51:35 AM #11 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:51:35 AM #12 Phase 36 File dlgbrnst.cpp, Line 1760 Burn process started at 48x (7,200 KB/s) 8:51:35 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:51:35 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2764 Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #450): write at #450 8:51:35 AM #15 Text 0 File MMC.cpp, Line 17584 StartDAO : CD-Text - Off 8:51:36 AM #16 Text 0 File MMC.cpp, Line 22250 Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON 8:51:36 AM #17 SPTI -1067 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1067) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x00 CDB Data: 0x5D 00 00 00 00 00 00 00 30 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 26 Buffer x06089780: Len x30 0x41 00 00 34 00 00 00 00 41 01 00 21 00 00 00 00 0x41 01 01 21 00 00 02 00 41 02 00 21 00 00 03 49 0x41 02 01 21 00 00 08 00 41 AA 01 34 00 4E 2D 08 8:51:36 AM #18 Text 0 File MMC.cpp, Line 17812 CueData, Len=48 41 00 00 34 00 00 00 00 41 01 00 21 00 00 00 00 41 01 01 21 00 00 02 00 41 02 00 21 00 00 03 49 41 02 01 21 00 00 08 00 41 aa 01 34 00 4e 2d 08 8:51:36 AM #19 CDR -1067 File ThreadedTransferInterface.cpp, Line 1785 Invalid field in parameter E: LITE-ON DVDRW SOHW-1673S 8:51:36 AM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1785 Could not perform start of Disc-at-once 8:51:37 AM #21 Phase 38 File dlgbrnst.cpp, Line 1760 Burn process failed at 48x (7,200 KB/s) 8:51:37 AM #22 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 8:51:39 AM #23 Text 0 File Cdrdrv.cpp, Line 10529 DriveLocker: UnLockVolume completed 8:51:39 AM #24 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Here's a couple of suggestions: CdRomPeripheral : LITE-ON DVDRW SOHW-1673S Version: JS02 Update the firmware to the latest - JSOD Burn process failed at 48x Take the burn speed down to 32x or 24x. CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited Try different media - like made in Japan Maxell, Taiyo Yuden or Sony.