hey everyone..... andrea from australia here. like every one else, im having the same problem but....i am burning some disks and then have this problem happen, where right at the end where it should be saying done. it then fails and says reset and could not perform end of disc-at-once error. im burning movies as data (do this all the time) as my dvd players play data and as we are only downloading for our own eyes only, and the fact u can fit like 5 movies on the disk and keep it for when i mite want to make a better dvd with menu and ect i have it all kepted in my folders. i am having hit and misses at the moment. some things are burning then the next time i make a disk of data it will fail grrrrrr and this is also happening when i burn a movie and not as data. have posted here my log so any advise will be most welcomed. read and checked all the things offered to everyone else and couldnt see anything wrong. am using a cheaper dvd disk called muller premium grade (never used before) but have had this error using some top line dvds where i have brought 5 dvds in a pack. the mullers are working fine with burning in my tvs dvd players burner burning tv shows off the box. (this offen has other disks i have used freezing on other dvd players but with these disks it seems to love them and have had not one disk freeze or not play on the kids portable player or my oldest daugthers dvd player. so these disks seem to be ok with that LG hard drive dvd burner plugged in the tv. thank u from andrea here is my log 1C82-0010-8011-0000-6699-5695-3713 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.0.1.2 Internal Version: 7, 0, 1, 2 Recorder: <SONY DVD RW DW-U18A> Version: UYS1 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <SONY DVD RW DW-U18A >Version: UYS1 - HA 1 TA 0 - 7.0.1.2 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : SONY DVD RW DW-U18A atapi Port 0 ID 1 DMA: Off DiskPeripheral : HDS722580VLAT20 atapi Port 3 ID 0 DMA: On === CDRom-Device-Map === SONY DVD RW DW-U18A D: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 40894464 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 255MB (261616kB) Free physical memory: 43MB (44624kB) Memory in use : 82 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.1.2008 ISO compilation 12:19:47 AM #1 Text 0 File Isodoc.cpp, Line 6411 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 12:19:47 AM #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 39936KB of Memory 12:19:47 AM #3 Text 0 File Reader.cpp, Line 124 Reader running 12:19:47 AM #4 Text 0 File Writer.cpp, Line 113 Writer D: SONY DVD RW DW-U18A running 12:19:47 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 12:19:50 AM #6 Text 0 File Burncd.cpp, Line 3302 Turn on Disc-At-Once, using DVD media 12:19:50 AM #7 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2144767 (476:36.67, 4188MB) 12:19:50 AM #8 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO (enabled: CD) 12:19:50 AM #9 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: SONY DVD RW DW-U18A, Media type: DVD-R Disc Manufacturer: TYG02 - Disc Application Code: 64, Disc Physical Code: 193 12:19:50 AM #10 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:19:50 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2144768 (2144768) = #2144768/476:36.68 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2144768 blocks [D: SONY DVD RW DW-U18A] -------------------------------------------------------------- 12:19:50 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [D: SONY DVD RW DW-U18A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4392484864, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2144768 | lead-out | 1 | 0x41 | 0x00 12:19:50 AM #13 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:19:50 AM #14 Phase 24 File dlgbrnst.cpp, Line 1725 Caching of files started 12:19:50 AM #15 Text 0 File Burncd.cpp, Line 4132 Cache writing successful. 12:19:50 AM #16 Phase 25 File dlgbrnst.cpp, Line 1725 Caching of files completed 12:19:50 AM #17 Phase 36 File dlgbrnst.cpp, Line 1725 Burn process started at 8x (11,080 KB/s) 12:19:50 AM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:19:50 AM #19 Text 0 File DVDR.cpp, Line 2580 Recording mode: Sequential Recording Mode for Multisession 12:19:50 AM #20 Text 0 File MMC.cpp, Line 21611 Set BUFE: Buffer under-run error protection -> ON , Adapt writespeed to disc : ON 12:19:50 AM #21 Text 0 File DVDR.cpp, Line 2735 Start write address at LBA 0 DVD high compatibility mode: Yes 12:19:50 AM #22 Text 0 File Cdrdrv.cpp, Line 8411 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:39:52 AM #23 SPTI -600 File SCSIPassThrough.cpp, Line 323 D: CdRom0: SCSIStatus(x00) WinError(121) NeroError(-600) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x5C 00 00 00 00 00 00 00 0C 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x0541a800: Len xc 12:40:08 AM #24 SPTI -1114 File SCSIPassThrough.cpp, Line 323 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114) Sense Key: 0x06 (KEY_UNIT_ATTENTION) Sense Code: 0x29 Sense Qual: 0x00 CDB Data: 0x2A 00 00 11 EC 80 00 00 20 00 00 00 Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29 Buffer x09040000: Len x10000 0xF2 F1 26 41 E7 BD E9 DD E9 20 21 9A 74 D1 D5 37 0x2C B4 77 4E AB 12 D5 DB 63 72 E8 1C AF B7 62 AF 0x6F 2C 97 AB 9D 08 36 D5 70 48 D1 DF 3F B8 0C 48 12:40:08 AM #25 CDR -1114 File Writer.cpp, Line 302 Reset occurred D: SONY DVD RW DW-U18A 12:40:12 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:40:13 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:40:13 AM #28 Text 0 File DVDR.cpp, Line 2978 EndDAO: Last written address was 1174655 12:41:05 AM #29 Phase 133 File dlgbrnst.cpp, Line 1725 Writing short lead-out 12:41:05 AM #30 SPTI -1176 File SCSIPassThrough.cpp, Line 323 D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 02 00 00 03 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 12:41:05 AM #31 CDR -1033 File WriterStatus.cpp, Line 167 Drive not ready D: SONY DVD RW DW-U18A 12:41:05 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 12:41:05 AM #33 Phase 38 File dlgbrnst.cpp, Line 1725 Burn process failed at 8x (11,080 KB/s) Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for the free Nero serial number, but I have many thanks to Nero logs. lol :~) You should edit it from your post as I have. See the pen and pad icon at the top left of the post. Now to the problems. Update Nero to the latest. http://www.filehippo.com/download_nero_7_premium/?2893 Turn on the DMA http://www.filehippo.com/download_nero_7_premium/?2893 You are using ether 4x or 8x media. The rule is to burn at no more than half the rated speed of the media. So 8x is too fast. You have little RAM for Nero to work, add a stick if you can. If not turn of some programs and services. You could also burn in safe mode, that you turn most things off for you. You might try Imgburn for writing discs.
