I've been reading constantly on how to solve this problem, but I am having no luck. I'm beginning to think its my dvd drive. I bought it back in Nov 07, so its fairly new. Thing is, i've burned probably 60 dvd+r memorex dvds with it and I am now getting an error while using shrink or nero by itself. I checked firmware, its up to date. I defragmented my Harddrive I uninstalled nero7 and shrink and reinstalled. I'm running XP with 1 gig of ram. The only thing i might have done differently, is I installed img burn, but after having this problem I uninstalled it. I've tried burning at slower speeds, but that does nothing. Since i've burned plenty of dvds with the memorex dvds I dont think its the media, but I have new media coming tomorrow I can try. I even tried doing the "nero test drive" function but when I go to create a disc I get the error "No additional sense information (000000)" Here is my log of the disc-at-once error User 4C87-2018-2045-477K-055X-403E-9539-**** (*) Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 7.5.13.1 Internal Version: 7, 5, 13, 1 (Nero Express) Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL0C - HA 1 TA 0 - 7.5.13.1 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <LITE-ON DVDRW LH-20A1H >Version: LL0C - HA 1 TA 0 - 7.5.13.1 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD800JB-00CRA1 17.0 nvidesm Port 0 ID 0 DMA: Off DiskPeripheral : Maxtor 4D040H2 DAH0 nvidesm Port 0 ID 1 DMA: Off CdRomPeripheral : LITE-ON DVDRW LH-20A1H LL0C nvidesm Port 0 ID 0 DMA: Off CdRomPeripheral : MITSUMI CD-ROM FX240S !Bj01 nvidesm Port 0 ID 1 DMA: Off CdRomPeripheral : ES3045Z IYQ246H 1.0 awlrz2rc Port 2 ID 0 DMA: Off CdRomPeripheral : ES3045Z IYQ246H 1.0 awlrz2rc Port 2 ID 1 DMA: Off === CDRom-Device-Map === LITE-ON DVDRW LH-20A1H E: CDRom0 MITSUMI CD-ROM FX240S !B F: CDRom1 ES3045Z IYQ246H H: CDRom2 ES3045Z IYQ246H I: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048052kB) Free physical memory: 572MB (585836kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) 5.2.2008 UDF compilation 5:34:59 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 5:34:59 PM #2 Text 0 File Isodoc.cpp, Line 6517 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Options : automatic UDF Revision : 1.02 UDF Partition Type : physical 5:34:59 PM #3 Text 0 File Burncd.cpp, Line 3467 Turn on Disc-At-Once, using DVD media 5:35:00 PM #4 Text 0 File DlgWaitCD.cpp, Line 306 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1549951 (344:26.01, 3027MB) 5:35:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 318 Write in overburning mode: NO (enabled: CD) 5:35:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 2929 Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 5:35:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 490 >>> Protocol of DlgWaitCD activities: <<< ========================================= 5:35:00 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 792 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1549952 (1549952) = #1549952/344:26.2 relocatable, disc pos for caching/writing not required/ required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1549952 blocks [E: LITE-ON DVDRW LH-20A1H] -------------------------------------------------------------- 5:35:00 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3174301696, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 1549952 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1549952 | 0 | 0x00 1549952 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 5:35:00 PM #10 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 5:35:00 PM #11 Phase 24 File dlgbrnst.cpp, Line 1760 Caching of files started 5:35:00 PM #12 Text 0 File Burncd.cpp, Line 4351 Cache writing successful. 5:35:00 PM #13 Phase 25 File dlgbrnst.cpp, Line 1760 Caching of files completed 5:35:00 PM #14 Phase 36 File dlgbrnst.cpp, Line 1760 Burn process started at 16x (22,160 KB/s) 5:35:00 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2712 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 5:35:00 PM #16 Text 0 File Cdrdrv.cpp, Line 9261 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 5:35:00 PM #17 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 5:35:25 PM #18 SPTI -500 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x00) WinError(1117) NeroError(-500) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x22030040: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5:35:29 PM #19 SPTI -1033 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 Buffer x00000000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 5:35:29 PM #20 CDR -1033 File Writer.cpp, Line 299 Drive not ready E: LITE-ON DVDRW LH-20A1H 5:35:30 PM #21 SPTI -1033 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 5:35:30 PM #22 SPTI -1033 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1033) Sense Key: 0x02 (KEY_NOT_READY) Sense Code: 0x04 Sense Qual: 0x01 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 01 5:35:30 PM #23 Phase 127 File dlgbrnst.cpp, Line 1760 Generating DVD high compatibility borders 5:35:39 PM #24 CDR -1033 File WriterStatus.cpp, Line 162 Drive not ready E: LITE-ON DVDRW LH-20A1H 5:35:39 PM #25 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 5:35:41 PM #26 Phase 38 File dlgbrnst.cpp, Line 1760 Burn process failed at 16x (22,160 KB/s) 5:35:45 PM #27 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 5:35:47 PM #28 Text 0 File Cdrdrv.cpp, Line 10538 DriveLocker: UnLockVolume completed 5:35:48 PM #29 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 9/27/2006 3:53:22 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Pleeeease help
DMA needs to be on, heres a guide to turn back on http://forums.afterdawn.com/thread_view.cfm/260038 You are using discs made by CMC mag...memorex..these ARE horrible discs and it is usually the case where you find a number of discs in a spindle that cause problems...try Verbatim or Sony (made in Japan) Slow your burn to 4X Also there is a later version of Nero available 7.10.1.0 from here http://www.filehippo.com/download_nero_7_premium/?2893
Having problems trying to find where to turn dma settings off. I've searched the guides, and google. This is my device manager, I don't have any settings under properties, etc that show my dma settings. Should I just uninstall my dvd drive?
HI, Just thought I would add if anyone is still following page. If you are checking DMA you are in wrong spot. Drop down to the IDE ATA/ATAPI controllers. In there you should have your ATA AND Primary IDE channel, double click on the IDE one. This will bring up a separate window, go to the advanced settings tab, the transfer mode should have DMA if available and the current transfer mode should have the mode type (mine says ultra DMA Mode 4 yours may say 5 0r whatever). If yours says PIO only, you need to reset it, go to website winhlp http://winhlp.com/node/10 microsoft says the only way is to uninstall then reinstall, but I have run this before, and it worked, they also show you how to thru the registry. If you don't trust the script you can look at it if you are on mozilla firefox. firefox just brings up the text instead of running it. I hope this helps, though with your problem I think it may be something else. But if you have had many burn errors yours probably went to PIO too.
Yeah, I'm having same problem with SATA Lite on 16X DH-16A6S a phillips-liteon Dell installed drive drive, cannot perform end of disc at once. With SATA motherboard and HDD and optical drives there is no changing DMA cause it's not changeable according to tech and appears that ways in device manager..
what do you mean no changing DMA? If it is DMA you can change to PIO, usually this will give you burn errors, or it will change to PIO on its own if you have something like 6 or more burn errors in a row. If it did change to PIO on its own, then you can change it back by running the script at winhlp,com (see above). this is the easiest way. Also make sure to defrag your drive, drives needing defraged can cause burn errors. if you are getting a could not perform end at disc at once, it is possible that you are having a conflict with other read/write programs. I had similar error after I downloaded graboid, which comes with vlc media player. I can have both on my computer, but if I have been using graboid/ vlc media player, I need to restart my computer before burning.
