Can someone tell me what the problem is here... I think I have somesort of a buffer issue, not sure. HELP!!! please... Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 8/16/2005 8:38:15 PM ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b Recorder: <SONY DVD RW DRU-800A> Version: KY04 - HA 2 TA 0 - 6.6.0.16 Adapter driver: <> HA 2 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <TOSHIBA DVD-ROM SD-R2512>Version: 1A04 - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R2512 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R2512 E: CDRom4 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (83886080) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 382MB (392176kB) Free physical memory: 96MB (98480kB) Memory in use : 74 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 23.8.2005 ISO compilation 12:30:51 AM #1 SCSI -500 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07480000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x09 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:30:51 AM #2 SCSI -500 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0CF81400 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x09 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:30:51 AM #3 Text 0 File Mmc.cpp, Line 19340 Writer-Buffer for SONY DVD RW DRU-800A\H2 T0 reduced to 32768Bytes 12:30:51 AM #4 SCSI -500 File Cdrdrv.cpp, Line 1434 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03806A00 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x09 0xA0 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:30:51 AM #5 CDR -500 File Writer.cpp, Line 311 SCSI command aborted SONY DVD RW DRU-800A\H2 T0 12:30:51 AM #6 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:30:52 AM #7 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:30:52 AM #8 Text 0 File DVDR.cpp, Line 2774 EndDAO: Last written address was 2463 12:30:52 AM #9 SCSI -500 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03804AF0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:30:52 AM #10 SCSI -500 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03804AF0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:30:53 AM #11 CDR -500 File WriterStatus.cpp, Line 167 SCSI command aborted SONY DVD RW DRU-800A\H2 T0 12:30:53 AM #12 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 12:30:53 AM #13 SCSI -500 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03804AF0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:30:53 AM #14 SCSI -500 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03804AF0 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x5A 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x48 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:30:54 AM #15 CDR -500 File WriterStatus.cpp, Line 172 SCSI command aborted SONY DVD RW DRU-800A\H2 T0 12:30:54 AM #16 TRANSFER -39 File WriterStatus.cpp, Line 172 Could not perform EndSession 12:30:54 AM #17 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 8/16/2005 8:38:15 PM File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
It's hooked up via iLink from my compaq pc. ilink to Firewire. That's wierd... because I can burn cd-r's and copy DVD's. This log is from when I was trying to make a Data dvd.
I have this problem. I got XP OS, better here is the log file: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 5:35:34 PM Nero Version: 6.6.0.8 (Nero Express) Recorder: Version: A103 - HA 1 TA 0 - 6.6.0.8 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: Version: A103 - HA 1 TA 0 - 6.6.0.8 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : LG CD-ROM CRD-8522B atapi Port 0 ID 1 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 1 ID 0 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.2a xmasscsi Port 3 ID 0 DMA: Off === CDRom-Device-Map === LG CD-ROM CRD-8522B E: CDRom0 HL-DT-ST DVDRAM GSA-4163 G: CDRom1 Generic DVD-ROM F: CDRom2 AXV CD/DVD-ROM H: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523764kB) Free physical memory: 244MB (249880kB) Memory in use : 52 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 25.8.2005 ISO compilation 7:31:08 PM #1 Text 0 File Isodoc.cpp, Line 6172 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 7:31:08 PM #2 Text 0 File Reader.cpp, Line 127 Reader running 7:31:08 PM #3 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4163B running 7:31:08 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3293 First writeable address = 0 (0x00000000) 7:31:08 PM #5 Text 0 File Burncd.cpp, Line 3153 Turn on Disc-At-Once, using DVD media 7:31:09 PM #6 Text 0 File DlgWaitCD.cpp, Line 259 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 356319 ( 79:10.69, 695MB) 7:31:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 271 Write in overburning mode: NO (enabled: CD) 7:31:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 2316 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD-R Disc Manufacturer: CMC MA - G. AE1 Disc Application Code: 64, Disc Physical Code: 193 7:31:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 433 >>> Protocol of DlgWaitCD activities: <<< ========================================= 7:31:09 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 356320 (356320) = #356320/79:10.70 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 356320 blocks [HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 7:31:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 729743360, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 356320 | lead-out | 1 | 0x41 | 0x00 7:31:09 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 7:31:09 PM #13 Text 0 File Burncd.cpp, Line 4040 Cache writing successful. 7:31:09 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 7:31:09 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 7:31:09 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2609 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 7:31:09 PM #17 Text 0 File DVDR.cpp, Line 2194 Recording mode: Sequential Recording Mode 7:31:09 PM #18 Text 0 File Mmc.cpp, Line 21235 Set BUFE: Buffer underrun protection -> ON 7:31:09 PM #19 Text 0 File DVDR.cpp, Line 2340 Start write address at LBA 0 DVD high compatibility mode: Yes 7:31:09 PM #20 Text 0 File Cdrdrv.cpp, Line 8430 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0.............. 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 7:31:09 PM #21 Text 0 File DVDR.cpp, Line 4842 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD-ROM Book Type setting not supported for the loaded disc type 7:31:36 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1435 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x099A0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x10 0x32 0x4D 0x00 0x0C 0x0C 0x00 7:31:36 PM #23 CDR -1135 File Writer.cpp, Line 311 Write error 7:31:36 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 7:31:36 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 7:31:36 PM #26 Text 0 File DVDR.cpp, Line 2603 EndDAO: Last written address was -1 7:31:36 PM #27 Text 0 File DVDR.cpp, Line 4842 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD+R Book Type setting not supported for the loaded disc type 7:31:36 PM #28 CDR -1135 File WriterStatus.cpp, Line 167 Write error 7:31:36 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 7:31:36 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 1:28:14 AM (Prassi/Veritas driver for win 2K) File 'Drivers\InCDfs.SYS': Ver=4, 2, 12, 1, size=91136 bytes, created 9/7/2004 4:27:22 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 2, 12, 1, size=28544 bytes, created 9/7/2004 4:27:38 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 2, 12, 1, size=5760 bytes, created 9/7/2004 4:29:08 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:07:00 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Please help me out. I use Memorex DVD-R 4.7GB. I have read that memorex is bad to use but now that I have them I want to be sure that the problem is the dvds and not my computer. Thanks.
@Burn-it - - not too bad, latest is 6.6.0.16 - A105 is out now. update your firmware from here - http://forum.rpc1.org/dl_firmware.php?download_id=1973 - atrocious utter rubbish media. we can tweak everything that's necessary to get you burning, but to have watchable movies from then on will require you to buy decent media. CMC Mag media is the absolute pits and will cause you to be back here posting logfiles. Buy decent media. - this is a -R disc, you can't booktype it.. - bad media. get good media. - this is a -R disc, you can't booktype it.. - bad media. get good media. - you're torturing that bad media with 8x, try 4x - InCD is Nero's 'packet writing' software, it can interfere. Uninstall Nero, uninstall completely via Nero's Clean Tools - " http://www.nero.com/en/Clean_Tools.html ", install 6.6.0.16 (Update-Package 1) from here - http://www.nero.com/en/nero-up.php, WITHOUT installing InCD. - i've made all the necessary suggestions to get you burning for a long time to come, [bold]IF[/bold] you stop using crap media Otherwise you'll be back here and i'll taunt the logfiles some more LOL. The only thing to get consistent burns from such media is a wood burner at 500C.
I have put Nero 6.6.0.16 > thx (didn't know that new vers was out) I have updated firmware > now A105 > thx(didn't know that new firmware out) Thansk for the rest of the info. I think the problem was the old firmware and old nero vers(without InCD) because now I have burn the same DVD's that before didn't work. So many many THANKS Creaky !!! And I'll not buy any MemoRex from now on. I'll stick to TDK and Verb. Thanks again dude.
