Hi, I have a problem with my TSSTcorp CD/DVDW SH-S182M SCSI CdRom Device CD/DVD burning device. It's a Toshiba-Samsung product. I'm using NERO OEM 6.6.1.15 and every time i try to burn a data DVD(or any DVD) i get this error message "Could not perform start of Disc-at-Once". When i hit the Burn button the disc in the drive even doesn't spin and after few seconds drive ejects it(even on lower speeds). I am using Philips DVD+RW and also tried Platinum Plus DVD+RW. Everything works with CDs I appreciate your help. Here is my endless error log: Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26.10.2004 19:35:32 Nero Version: 6.6.0.19 Internal Version: 6, 6, 0, 19d (Nero Express) Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB00 - HA 4 TA 1 - 6.6.0.19 Adapter driver: <JRAID> HA 4 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <CH3277P YLU834M >Version: 1.0 - HA 5 TA 0 - 6.6.0.19 Adapter driver: <ayd0izgb> HA 5 === Scsi-Device-Map === DiskPeripheral : SATA WDC WD2500 JRAID Port 4 ID 0 DMA: Off CdRomPeripheral : TSSTcorpCD/DVDW SH-S182MSB00 JRAID Port 4 ID 1 DMA: Off CdRomPeripheral : CH3277P YLU834M 1.0 ayd0izgb Port 5 ID 0 DMA: Off === CDRom-Device-Map === TSSTcorp CD/DVDW SH-S182M D: CDRom0 CH3277P YLU834M E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2096620kB) Free physical memory: 1523MB (1559724kB) Memory in use : 25 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 2.6.2007 ISO compilation 20:37:47 #1 Text 0 File Isodoc.cpp, Line 6368 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 20:37:47 #2 Text 0 File Reader.cpp, Line 127 Reader running 20:37:47 #3 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 20:37:47 #4 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 20:37:48 #5 Text 0 File DlgWaitCD.cpp, Line 272 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 607 ( 0:08.07, 1MB) 20:37:48 #6 Text 0 File DlgWaitCD.cpp, Line 284 Write in overburning mode: NO (enabled: DVD) 20:37:48 #7 Text 0 File DlgWaitCD.cpp, Line 2494 Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+RW Disc Manufacturer ID: MBIPG101, Media Type ID: W04, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 1 20:37:48 #8 Text 0 File DlgWaitCD.cpp, Line 450 >>> Protocol of DlgWaitCD activities: <<< ========================================= 20:37:48 #9 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 608 (608) = #608/0:8.8 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 608 blocks [TSSTcorp CD/DVDW SH-S182M] -------------------------------------------------------------- 20:37:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1245184, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 608 | lead-out | 1 | 0x41 | 0x00 20:37:48 #11 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 20:37:48 #12 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 20:37:48 #13 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 20:37:48 #14 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (5 540 KB/s) 20:37:48 #15 SCSI -1066 File Cdrdrv.cpp, Line 1183 SCSI Exec, HA 4, TA 1, LUN 0, buffer 0x03B75400 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x24 0x00 20:37:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 20:37:48 #17 Text 0 File Cdrdrv.cpp, Line 8926 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: MBIPG101 Media type ID: W04 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9 23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #............... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 20:37:48 #18 Text 0 File Cdrdrv.cpp, Line 8926 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: MBIPG101 Media type ID: W04 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9 23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #............... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 20:37:48 #19 Text 0 File Cdrdrv.cpp, Line 8926 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+RW (9), Part Version: 1.1x (2) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 1 h Disc Manufacturer ID: MBIPG101 Media type ID: W04 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 57 Media Specific [16..63]: 00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9 23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #............... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 20:37:48 #20 Text 0 File DVDR.cpp, Line 7119 Drive: TSSTcorp CD/DVDW SH-S182M Book Type request [TSST]: DVD-ROM Changing the Book Type was finished successfully, return code 0 20:37:48 #21 CDR -1207 File DVDR.cpp, Line 5383 Book Type automatically set to: DVD-ROM 20:37:48 #22 Phase 98 File dlgbrnst.cpp, Line 1832 Start formatting disc before burning 20:37:48 #23 SCSI -1065 File Cdrdrv.cpp, Line 1183 SCSI Exec, HA 4, TA 1, LUN 0, buffer 0x03B75200 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x20 Sense Qual: 0x00 CDB Data: 0x04 0x11 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x20 0x00 20:37:48 #24 Phase 101 File dlgbrnst.cpp, Line 1832 Formatting disc failed 20:37:48 #25 Text 0 File DVDPlusRW.cpp, Line 659 Start write address at LBA 0 DVD high compatibility mode: Yes 20:37:48 #26 CDR -1065 File ThreadedTransferInterface.cpp, Line 1778 Invalid command 20:37:48 #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778 Could not perform start of Disc-at-once 20:37:48 #28 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (5 540 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 20.12.2004 21:37:14 (Prassi/Veritas driver for win 2K) File 'Drivers\jraid.sys': Ver=1.10.02.00 built by: WinDDK, size=43264 bytes, created 2.06.2006 14:49:56 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi madis Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB00 Update the firmware on the drive. The latest is SB04. Disc Manufacturer ID: MBIPG101 Not the best. Better +RW discs would be Verbatim or Maxell. Formatting disc failed Do a full erase of the disc. If that fails then something is up with disc itself. DiskPeripheral : SATA WDC WD2500 JRAID Port 4 ID 0 DMA: Off CdRomPeripheral : TSSTcorpCD/DVDW SH-S182MSB00 JRAID Port 4 ID 1 DMA: Off CdRomPeripheral : CH3277P YLU834M 1.0 ayd0izgb Port 5 ID 0 DMA: Off You probably fine here - Nero only report DMA correctly when the drives are connected by ide. Check device manager and the controller for these drive to check and make DMA is on.
Thank you for your reply, but i haven't found a solution jet. I updated firmware. DMA is enabled(Tranfer mode: DMA if available) on all drives. And drive ejects the disc when i try to Full Erase it. Help"
Ok try another disc that hasn't been burned to before. If still a no go then switch the media to the ones above. Have you tried burning to non RW discs like -R or +R discs? Any problems w/ them?
Ok, I bought a Verbatim DVD+R disc and everything works just fine. It seems that my PC has problems writing RW discs. Any idea why? But thanks for help anyway.
Could just be that the 2 you've tried aren't compatible w/ the drive. Another option is try another burning program and see hoow that goes w/ the rw. Here's a good free one - ImgBurn. Use the build mode to add the data files or the video_ts folder to burn.
I installed ImgBurn, built a a iso file and when i hit the burn button i got a message "The disc needs to be formatted before use...." I selected YES, but recived an error message "Failed to Erase Disc - Invalid Command Operation Code-Operation Failed! - Duration: 00:00:00"
Has this disc ever been burned too? Sounds like it has - that's why Nero & ImgBurn are trying to format then when that fails they try to erase the disc. have you tried one or a different brand that hasn't been burned to?
Ok - I'm at a loss on why this burner isn't liking the RW media. You still might want to try another brand besides Platinum Plus or Phillips - try Verbatim or Maxell.
Hello, This is a firmware related problem. Your DVD writer is not used to newer type of DVDs. I have just solved this problem by doing this: 1. I find out exactly what kind of DVD writer I have. 2. I went to their site and downloaded the correct firmware, and the instruction. 3. I followed the instruction provided. 4. After flashing the firmware everything started to work even better than before. Good Luck! Shahab
