Debian 3.0r2 ja äänet+muuta ongelmaa

Taas täällä kysymässä neovoja tuohon Linux hommaan, kun ei taivu niin ei...

Eli miten kys. Linuxiin saa äänet toimimaan? Pitääkö asentaa joku "ajuri"? (ALSA?) Äänikortti on SoundBlaster 128 (luulisin)

Entäs kuinka saan HP DeskJet 3420 (usb) tulostimen toimimaan (2.4 kernelin aino laittaa)
Olisin kovin iloinen jos sasin ohjeet [bold]raulalangasta.[/bold]

Vai olisiko joku muu Linux sopivampi minulle? (tiedän, olen kysynyt tätäkin) Mandrake ei tule kysymykseen erinäisistä syistä...

 

kaipaan edelleen neuvoja...
Olen lukenut Debianin kotisuilla olevaa http://www.tldp.org/HOWTO/Config-HOWTO/x43.html#AEN173
tiedonlähdettä, liittyen äänikorttiin, mutta en oikein tiedä mitä tehdä.
Osaako jo auttaa?
Mites se ALSA:m asennus käytönnössä tapahtuu?

 

Täältä löytyy aika hyvän näköinen ohje tohon hommaan:
http://www.linuxmafia.com/faq/Debian/alsa.html

 

Juu-u on varmasti ihan hyvä ohje, mutta em ollut englannin tunnilla erityisen aktiivinen, näin ollen en kaikkea (=juurikaan) tuosta ymmärtänyt.

Voisiko joku kertoa suomeksi kohta-kohdalta miten tulee menetellä, jotta saan äänet toimimaan?

 

Vieläkin on sama ongelma...
Lötyykö Suomenkielisiä neuvoja?

 

Alsan asennuksessa on tosiaan mullakin vähän ongelmia.
./configure
checking for gcc... gcc
checking for C compiler default output... configure: error: C compiler cannot create executables

Tulee ilmotus jo heti alussa. Löytää gcc:n, mutta kun katon sitä config.log lisää, niin ei löydy mitään uutta tietoa vikaan.

 

Postaakko vaikka sen config.log:in ja sen ./configure outputin kokonaan tänne...

Mikä distro kyseessä...??

 

Suse i686 on Distro

Sittren toisessa 40 Mt ohjelmassa tulee

, että jos tiedät mitä tehdä niin kerro.

ja vielä

 

Toi config logi viittaa, että [bold]glibc[/bold]:tä ei ole asennettu, eli asenna se ja kokeile uudestaan...suse:en pitäisi kyllä löytyä alsa ihan rpm paketteinakin, eli niiden asennus voisi onnistua paljon helpommin...

Asenna [bold]libsndfile[/bold], sekin löytyy varmaankin sieltä susen omista paketeista...

 

Onko kyseessä siis 9.1 personal?

Jos on niin YaST -> Software -> Change Source of Installation

Add -> FTP

Serveriksi vaikka
ftp.uni-kl.de
hakemistoksi
pub/linux/suse/i386/9.1/

Sitten asennat C/C++ systeemit. Noin voi myös lisätä esimerkiksi KDE päivitykset laittamalla hakemistoksi
pub/linux/suse/i386/supplementary/KDE/update_for_9.x/yast-source
tuon x voi korvata oman version numerolla.

Voit myös kopioida cd:t tai dvd:n sisällön kiintolevylle esim vaikka hakemistoon /media/SuSE_MEDIA ja lisäät tuon samalla tavalla YaST:issa Add -> Local Directory tämän jälkeen ei tarvitse enää leikkiä levyjen kanssa.

 

D Kiitos noista tiedoista. libwx_gtk2-2.4.so.0 teidosto varmaan löytyy sieltä serveriltä sitten samalla. Rpm searchista ja googlella koitin koitin etsiä, mutta ei Suse 9.1 distroon löytynyt.

/Edi Tui ei varmaankaan ole Anonymous serveri (?) koska tulee kummallakin hakemistolla errori ja yritin ilman hakemistoa serverille, sekä muita vaihtoehtoja.

 

Tollasta tiedosta ei löydy suoraan sieltä, mutta kun asennat [bold]wxGTK[/bold] paketin, niin sitten ton pitäis löytyä sun koneelta...ja toi paketti kylläkin varmaan löytyy sieltä serveriltä...

 

Mistä johtuu tämä crashi???


(audacity:16700): Gtk-CRITICAL **: file gtkaccellabel.c: line 213 (gtk_accel_label_new): assertion `string != NULL' failed

(audacity:16700): Gtk-CRITICAL **: file gtkmisc.c: line 210 (gtk_misc_set_alignment): assertion `GTK_IS_MISC (misc)' failed

(audacity:16700): Gtk-CRITICAL **: file gtkcontainer.c: line 947 (gtk_container_add): assertion `GTK_IS_WIDGET (widget)' failed

(audacity:16700): Gtk-CRITICAL **: file gtkaccellabel.c: line 399 (gtk_accel_label_set_accel_widget): assertion `GTK_IS_ACCEL_LABEL (accel_label)' failed
Segmentation fault

 

Sitten olisi vielä ongelma libcurl.so.3 tiedostossa, jota en löydä Suseen. Yritin etsiä googlella ja rpm searchilla, mutta löysin vain Mnrkeen ja Alt linuxeen yms. Jostain katoin, että se pitäis linkittää sibcurl.so.2 sesta, mutta ei varmaankaan pelkkä uudelleen nimeäminen auta. Onko kellään ttietoa?? ja tohon ylempäänkin saa vastata, jos edes jotain hajua . thanX

 

Asensin ja tulee edelleen sama viesti. Tuolla ei kyllä lue minkään muun asentamisesta.Mitä voi vielä tehdä?

 

Postaappa se uusi config.logi...

 

~/alsa-driver-1.0.8> ./configure
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for ranlib... ranlib
checking for a BSD-compatible install... /usr/bin/install -c
checking how to run the C preprocessor... /lib/cpp
configure: error: C preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.
lxuser@linux:~/alsa-driver-1.0.8> ./configure
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for ranlib... ranlib
checking for a BSD-compatible install... /usr/bin/install -c
checking how to run the C preprocessor... /lib/cpp
configure: error: C preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.


JA

-----------------------------------

/usr/bin/uname -p = unknown
/bin/uname -X = unknown

/bin/arch = i686
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown

PATH: /home/lxuser/bin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/X11R6/bin
PATH: /bin
PATH: /usr/games
PATH: /opt/gnome/bin
PATH: /opt/kde3/bin
PATH: /usr/lib/java/jre/bin
PATH: /root/oss/bin
PATH: /root/oss/bin


## ----------- ##
## Core tests. ##
## ----------- ##

configure:1323: checking for gcc
configure:1339: found /usr/bin/gcc
configure:1349: result: gcc
configure:1593: checking for C compiler version
configure:1596: gcc --version </dev/null >&5
gcc (GCC) 3.3.3 (SuSE Linux)
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

configure:1599: $? = 0
configure:1601: gcc -v </dev/null >&5
Reading specs from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/specs
Configured with: ../configure --enable-threads=posix --prefix=/usr --with-local-prefix=/usr/local --infodir=/usr/share/info --mandir=/usr/share/man --enable-languages=c,c++,f77,objc,java,ada --disable-checking --libdir=/usr/lib --enable-libgcj --with-gxx-include-dir=/usr/include/g++ --with-slibdir=/lib --with-system-zlib --enable-shared --enable-__cxa_atexit i586-suse-linux
Thread model: posix
gcc version 3.3.3 (SuSE Linux)
configure:1604: $? = 0
configure:1606: gcc -V </dev/null >&5
gcc: `-V' option must have argument
configure:1609: $? = 1
configure:1633: checking for C compiler default output
configure:1636: gcc conftest.c >&5
configure:1639: $? = 0
configure:1685: result: a.out
configure:1690: checking whether the C compiler works
configure:1696: ./a.out
configure:1699: $? = 0
configure:1716: result: yes
configure:1723: checking whether we are cross compiling
configure:1725: result: no
configure:1728: checking for suffix of executables
configure:1730: gcc -o conftest conftest.c >&5
configure:1733: $? = 0
configure:1758: result:
configure:1764: checking for suffix of object files
configure:1786: gcc -c conftest.c >&5
configure:1789: $? = 0
configure:1811: result: o
configure:1815: checking whether we are using the GNU C compiler
configure:1840: gcc -c conftest.c >&5
configure:1843: $? = 0
configure:1846: test -s conftest.o
configure:1849: $? = 0
configure:1862: result: yes
configure:1868: checking whether gcc accepts -g
configure:1890: gcc -c -g conftest.c >&5
configure:1893: $? = 0
configure:1896: test -s conftest.o
configure:1899: $? = 0
configure:1910: result: yes
configure:1927: checking for gcc option to accept ANSI C
configure:1988: gcc -c -g -O2 conftest.c >&5
configure:1943:19: stdio.h: No such file or directory
configure:1944:23: sys/types.h: No such file or directory
configure:1945:22: sys/stat.h: No such file or directory
configure:1948: error: parse error before '*' token
configure:1948: warning: `struct stat' declared inside parameter list
configure:1948: warning: its scope is only this definition or declaration, which is probably not what you want
configure:1948: warning: data definition has no type or storage class
configure:1967: error: parse error before "FILE"
configure:1967: warning: `struct stat' declared inside parameter list
configure:1967: error: `pairnames' declared as function returning a function
configure:1967: error: parse error before "int"
configure:1991: $? = 1
configure: failed program was:
| #line 1934 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p;
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:1988: gcc -qlanglvl=ansi -c -g -O2 conftest.c >&5
gcc: unrecognized option `-qlanglvl=ansi'
configure:1943:19: stdio.h: No such file or directory
configure:1944:23: sys/types.h: No such file or directory
configure:1945:22: sys/stat.h: No such file or directory
configure:1948: error: parse error before '*' token
configure:1948: warning: `struct stat' declared inside parameter list
configure:1948: warning: its scope is only this definition or declaration, which is probably not what you want
configure:1948: warning: data definition has no type or storage class
configure:1967: error: parse error before "FILE"
configure:1967: warning: `struct stat' declared inside parameter list
configure:1967: error: `pairnames' declared as function returning a function
configure:1967: error: parse error before "int"
configure:1991: $? = 1
configure: failed program was:
| #line 1934 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p;
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:1988: gcc -std1 -c -g -O2 conftest.c >&5
cc1: error: unrecognized option `-std1'
configure:1991: $? = 1
configure: failed program was:
| #line 1934 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p;
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:1988: gcc -Ae -c -g -O2 conftest.c >&5
<command line>:4:2: missing '(' after predicate
configure:1943:19: stdio.h: No such file or directory
configure:1944:23: sys/types.h: No such file or directory
configure:1945:22: sys/stat.h: No such file or directory
configure:1948: error: parse error before '*' token
configure:1948: warning: `struct stat' declared inside parameter list
configure:1948: warning: its scope is only this definition or declaration, which is probably not what you want
configure:1948: warning: data definition has no type or storage class
configure:1967: error: parse error before "FILE"
configure:1967: warning: `struct stat' declared inside parameter list
configure:1967: error: `pairnames' declared as function returning a function
configure:1967: error: parse error before "int"
configure:1991: $? = 1
configure: failed program was:
| #line 1934 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p;
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:1988: gcc -Aa -D_HPUX_SOURCE -c -g -O2 conftest.c >&5
<command line>:4:2: missing '(' after predicate
configure:1943:19: stdio.h: No such file or directory
configure:1944:23: sys/types.h: No such file or directory
configure:1945:22: sys/stat.h: No such file or directory
configure:1948: error: parse error before '*' token
configure:1948: warning: `struct stat' declared inside parameter list
configure:1948: warning: its scope is only this definition or declaration, which is probably not what you want
configure:1948: warning: data definition has no type or storage class
configure:1967: error: parse error before "FILE"
configure:1967: warning: `struct stat' declared inside parameter list
configure:1967: error: `pairnames' declared as function returning a function
configure:1967: error: parse error before "int"
configure:1991: $? = 1
configure: failed program was:
| #line 1934 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p;
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:1988: gcc -Xc -D__EXTENSIONS__ -c -g -O2 conftest.c >&5
gcc: unrecognized option `-Xc'
configure:1943:19: stdio.h: No such file or directory
configure:1944:23: sys/types.h: No such file or directory
configure:1945:22: sys/stat.h: No such file or directory
configure:1948: error: parse error before '*' token
configure:1948: warning: `struct stat' declared inside parameter list
configure:1948: warning: its scope is only this definition or declaration, which is probably not what you want
configure:1948: warning: data definition has no type or storage class
configure:1967: error: parse error before "FILE"
configure:1967: warning: `struct stat' declared inside parameter list
configure:1967: error: `pairnames' declared as function returning a function
configure:1967: error: parse error before "int"
configure:1991: $? = 1
configure: failed program was:
| #line 1934 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #include <stdarg.h>
| #include <stdio.h>
| #include <sys/types.h>
| #include <sys/stat.h>
| /* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
| struct buf { int x; };
| FILE * (*rcsopen) (struct buf *, struct stat *, int);
| static char *e (p, i)
| char **p;
| int i;
| {
| return p;
| }
| static char *f (char * (*g) (char **, int), char **p, ...)
| {
| char *s;
| va_list v;
| va_start (v,p);
| s = g (p, va_arg (v,int));
| va_end (v);
| return s;
| }
| int test (int i, double x);
| struct s1 {int (*f) (int a);};
| struct s2 {int (*f) (double a);};
| int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
| int argc;
| char **argv;
| int
| main ()
| {
| return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
| ;
| return 0;
| }
configure:2015: result: none needed
configure:2033: gcc -c -g -O2 conftest.c >&5
conftest.c:2: error: parse error before "me"
configure:2036: $? = 1
configure: failed program was:
| #ifndef __cplusplus
| choke me
| #endif
configure:2186: checking for ranlib
configure:2202: found /usr/bin/ranlib
configure:2213: result: ranlib
configure:2262: checking for a BSD-compatible install
configure:2316: result: /usr/bin/install -c
configure:2339: checking how to run the C preprocessor
configure:2375: gcc -E conftest.c
In file included from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/syslimits.h:7,
from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:11,
from configure:2370:
/usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:122:75: limits.h: No such file or directory
configure:2381: $? = 1
configure: failed program was:
| #line 2361 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:2375: gcc -E conftest.c
In file included from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/syslimits.h:7,
from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:11,
from configure:2370:
/usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:122:75: limits.h: No such file or directory
configure:2381: $? = 1
configure: failed program was:
| #line 2361 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:2375: gcc -E -traditional-cpp conftest.c
configure:2372: assert.h: No such file or directory
configure:2381: $? = 1
configure: failed program was:
| #line 2361 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:2375: gcc -E -traditional-cpp conftest.c
configure:2372: assert.h: No such file or directory
configure:2381: $? = 1
configure: failed program was:
| #line 2361 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:2375: /lib/cpp conftest.c
In file included from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/syslimits.h:7,
from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:11,
from configure:2370:
/usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:122:75: limits.h: No such file or directory
configure:2381: $? = 1
configure: failed program was:
| #line 2361 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:2375: /lib/cpp conftest.c
In file included from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/syslimits.h:7,
from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:11,
from configure:2370:
/usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:122:75: limits.h: No such file or directory
configure:2381: $? = 1
configure: failed program was:
| #line 2361 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:2457: result: /lib/cpp
configure:2482: /lib/cpp conftest.c
In file included from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/syslimits.h:7,
from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:11,
from configure:2477:
/usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:122:75: limits.h: No such file or directory
configure:2488: $? = 1
configure: failed program was:
| #line 2468 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:2482: /lib/cpp conftest.c
In file included from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/syslimits.h:7,
from /usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:11,
from configure:2477:
/usr/lib/gcc-lib/i586-suse-linux/3.3.3/include/limits.h:122:75: limits.h: No such file or directory
configure:2488: $? = 1
configure: failed program was:
| #line 2468 "configure"
| /* confdefs.h. */
|
| #define PACKAGE_NAME ""
| #define PACKAGE_TARNAME ""
| #define PACKAGE_VERSION ""
| #define PACKAGE_STRING ""
| #define PACKAGE_BUGREPORT ""
| /* end confdefs.h. */
| #ifdef __STDC__
| # include <limits.h>
| #else
| # include <assert.h>
| #endif
| Syntax error
configure:2556: error: C preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.

## ---------------- ##
## Cache variables. ##
## ---------------- ##

ac_cv_c_compiler_gnu=yes
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_exeext=
ac_cv_objext=o
ac_cv_path_install='/usr/bin/install -c'
ac_cv_prog_CPP=/lib/cpp
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_cc_g=yes
ac_cv_prog_cc_stdc=no

## ----------------- ##
## Output variables. ##
## ----------------- ##

AR='ar'
ARCH='
AS='as'
CC='gcc'
CFLAGS='-g -O2'
CONFIG_ALPHA='
CONFIG_ARCH_SA1100='
CONFIG_ARM='
CONFIG_ASIHPK='
CONFIG_BROKEN='
CONFIG_COMPAT='
CONFIG_EXPERIMENTAL='
CONFIG_FW_LOADER='
CONFIG_GSC='
CONFIG_I2C='
CONFIG_INPUT='
CONFIG_ISA='
CONFIG_ISAPNP='
CONFIG_ISAPNP_KERNEL='
CONFIG_L3='
CONFIG_PARISC='
CONFIG_PARPORT='
CONFIG_PCI='
CONFIG_PCMCIA='
CONFIG_PNP='
CONFIG_PNP_KERNEL='
CONFIG_PPC='
CONFIG_PROC_FS='
CONFIG_RTC='
CONFIG_SBUS='
CONFIG_SGI='
CONFIG_SND='
CONFIG_SND_AC97_CODEC='
CONFIG_SND_AD1816A='
CONFIG_SND_AD1848='
CONFIG_SND_ALI5451='
CONFIG_SND_ALS100='
CONFIG_SND_ALS4000='
CONFIG_SND_ASIHPI='
CONFIG_SND_ATIIXP='
CONFIG_SND_ATIIXP_MODEM='
CONFIG_SND_AU8810='
CONFIG_SND_AU8820='
CONFIG_SND_AU8830='
CONFIG_SND_AZT2320='
CONFIG_SND_AZT3328='
CONFIG_SND_AZX='
CONFIG_SND_BIT32_EMUL='
CONFIG_SND_BT87X='
CONFIG_SND_BT87X_OVERCLOCK='
CONFIG_SND_CA0106='
CONFIG_SND_CMI8330='
CONFIG_SND_CMIPCI='
CONFIG_SND_CS4231='
CONFIG_SND_CS4232='
CONFIG_SND_CS4236='
CONFIG_SND_CS4281='
CONFIG_SND_CS46XX='
CONFIG_SND_CS46XX_NEW_DSP='
CONFIG_SND_DARLA20='
CONFIG_SND_DARLA24='
CONFIG_SND_DATE='
CONFIG_SND_DEBUG='
CONFIG_SND_DEBUG_DETECT='
CONFIG_SND_DEBUG_MEMORY='
CONFIG_SND_DT019X='
CONFIG_SND_DUMMY='
CONFIG_SND_EMU10K1='
CONFIG_SND_EMU10K1X='
CONFIG_SND_ENS1370='
CONFIG_SND_ENS1371='
CONFIG_SND_ES1688='
CONFIG_SND_ES18XX='
CONFIG_SND_ES1938='
CONFIG_SND_ES1968='
CONFIG_SND_ES968='
CONFIG_SND_FM801='
CONFIG_SND_FM801_TEA575X='
CONFIG_SND_GINA20='
CONFIG_SND_GINA24='
CONFIG_SND_GINA3G='
CONFIG_SND_GUSCLASSIC='
CONFIG_SND_GUSEXTREME='
CONFIG_SND_GUSMAX='
CONFIG_SND_GUS_SYNTH='
CONFIG_SND_HARMONY='
CONFIG_SND_HDSP='
CONFIG_SND_HDSPM='
CONFIG_SND_HWDEP='
CONFIG_SND_ICE1712='
CONFIG_SND_ICE1724='
CONFIG_SND_INDIGO='
CONFIG_SND_INDIGODJ='
CONFIG_SND_INDIGOIO='
CONFIG_SND_INTEL8X0='
CONFIG_SND_INTEL8X0M='
CONFIG_SND_INTERWAVE='
CONFIG_SND_INTERWAVE_STB='
CONFIG_SND_KERNELDIR='
CONFIG_SND_KORG1212='
CONFIG_SND_LAYLA20='
CONFIG_SND_LAYLA24='
CONFIG_SND_LAYLA3G='
CONFIG_SND_LOOPBACK='
CONFIG_SND_MAESTRO3='
CONFIG_SND_MIA='
CONFIG_SND_MIXART='
CONFIG_SND_MIXER_OSS='
CONFIG_SND_MONA='
CONFIG_SND_MPU401='
CONFIG_SND_MPU401_UART='
CONFIG_SND_MSND_PINNACLE='
CONFIG_SND_MTPAV='
CONFIG_SND_MVERSION='
CONFIG_SND_NM256='
CONFIG_SND_OPL3SA2='
CONFIG_SND_OPL3_LIB='
CONFIG_SND_OPL4_LIB='
CONFIG_SND_OPTI92X_AD1848='
CONFIG_SND_OPTI92X_CS4231='
CONFIG_SND_OPTI93X='
CONFIG_SND_OSSEMUL='
CONFIG_SND_PC98_CS4232='
CONFIG_SND_PCM='
CONFIG_SND_PCM_OSS='
CONFIG_SND_PCXHR='
CONFIG_SND_PDAUDIOCF='
CONFIG_SND_PDPLUS='
CONFIG_SND_PORTMAN2X4='
CONFIG_SND_POWERMAC='
CONFIG_SND_RAWMIDI='
CONFIG_SND_RME32='
CONFIG_SND_RME9652='
CONFIG_SND_RME96='
CONFIG_SND_RTCTIMER='
CONFIG_SND_SA11XX_UDA1341='
CONFIG_SND_SB16='
CONFIG_SND_SB16_CSP='
CONFIG_SND_SB8='
CONFIG_SND_SBAWE='
CONFIG_SND_SEQUENCER='
CONFIG_SND_SEQUENCER_OSS='
CONFIG_SND_SEQ_DUMMY='
CONFIG_SND_SERIALMIDI='
CONFIG_SND_SERIAL_U16550='
CONFIG_SND_SGALAXY='
CONFIG_SND_SONICVIBES='
CONFIG_SND_SSCAPE='
CONFIG_SND_SUN_AMD7930='
CONFIG_SND_SUN_CS4231='
CONFIG_SND_SUN_DBRI='
CONFIG_SND_TIMER='
CONFIG_SND_TRIDENT='
CONFIG_SND_USB_AUDIO='
CONFIG_SND_USB_USX2Y='
CONFIG_SND_VERBOSE_PRINTK='
CONFIG_SND_VERSION='1.0.8'
CONFIG_SND_VIA82XX='
CONFIG_SND_VIA82XX_MODEM='
CONFIG_SND_VIRMIDI='
CONFIG_SND_VX222='
CONFIG_SND_VXP440='
CONFIG_SND_VXPOCKET='
CONFIG_SND_VX_LIB='
CONFIG_SND_WAVEFRONT='
CONFIG_SND_YMFPCI='
CONFIG_SOUND='
CONFIG_SOUND_PRIME='
CONFIG_SPARC32='
CONFIG_SPARC64='
CONFIG_USB='
CONFIG_VIDEO_DEV='
CONFIG_X86='
CONFIG_X86_PC9800='
CPP='/lib/cpp'
CPPFLAGS='
CROSS_COMPILE='
DEFS='
ECHO_C='
ECHO_N='-n'
ECHO_T='
EGREP='
EXEEXT='
EXTRA_INCLUDES='
GENKSYMS='
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
KERNEL_INC='
KLD='
LDFLAGS='
LIBOBJS='
LIBS='
LTLIBOBJS='
MAKE_ADDS='
NEW_KBUILD='
OBJEXT='o'
PACKAGE_BUGREPORT='
PACKAGE_NAME='
PACKAGE_STRING='
PACKAGE_TARNAME='
PACKAGE_VERSION='
PATH_SEPARATOR=':'
RANLIB='ranlib'
SHELL='/bin/sh'
SRCDIR='
ac_ct_CC='gcc'
ac_ct_RANLIB='ranlib'
bindir='${exec_prefix}/bin'
build_alias='
c_opts='
datadir='${prefix}/share'
exec_prefix='NONE'
host_alias='
includedir='${prefix}/include'
infodir='${prefix}/info'
kaversion='
kextraversion='
kpatchlevel='
ksublevel='
kversion='
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localstatedir='${prefix}/var'
m_opts='
mandir='${prefix}/man'
moddir='
moddir_tree='
modsubdir='
msmp='
oldincludedir='/usr/include'
prefix='NONE'
processor='
program_transform_name='s,x,x,'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias='

## ----------- ##
## confdefs.h. ##
## ----------- ##

#define PACKAGE_BUGREPORT ""
#define PACKAGE_NAME ""
#define PACKAGE_STRING ""
#define PACKAGE_TARNAME ""
#define PACKAGE_VERSION ""

configure: exit 1

 

Kertokaa joku tietäjä, miten saan Alsan toimiin??!! ^On errorit mitä antaa...

 

Siis oliko nyt kyseessä suse??
Miksi et asenna niitä susen omia paketteja??

 

Suse on kyseessä. Koitin ftp:n kautta, mutta ei onnistunut. Päivitin kaikki Kernelit ja paketit jo alussa. 1 cdn Suse, joten päivityksiä/paketteija ei löydy enää cdltä. [bold] Mistä voi tietää käytänkö Ossia vai Alsaa, kun asensin erään RPM Alsa-driver paketin Suse 9.1 distroon, siis mun distroon. [/bold] Kun kuitenkin äänet toimii ja Terminaalissa voi käyttää alsamixeriä, mikä tuli varmaan niissä päivityksissä.