I purchased a Digivox T and just flashed it. The channels are all mixed up and also most only have numbers as names. I am using the new ver 3.3 0906 for chorus mmds. I have flashed other boxes already using this version but all the channels scanned OK with their correct names from channel 1 up starting with RTE1. The box I just flashed starts at channel 60. Everything seems to be there except to be mixed up with only some names. I have flashed a few times but each scan gives the same results. Not too big an issue but would like to have everything in order. Any help would be appreciated.
ryange im guessing youre scanning from a split cable try a rescan from the main source coming in only good luck.......
newer boxes have a newer firmware theres a different tuner in them its the digivox_ter_v3330_090806.bin file in eamos library also do ya flash the box with a channel file this should sort the names on them
it is common with digivox,factory reset 0000 to delete and rescan again you should see names appear,and emu to on.
Many thanks jackooh. I was scanning from a split cable. Did factory reset and re scanned from main cable and nearly all the channrls came up with their correct names. Noticed that with the newer digivox t there are a few extra channels also.
Daithi, What software version did you reflash the older style box with to get the extra few channels.
the same one just do factory reset first then when ya scan go to all channels there will be a few channels called TV8655 or something similar one is disney cine magic also sky comedy is mixed up with racing UK i think they will all be there its just a matter of selecting each channel and make sure it is what it is rename them and put them into the appropriate section ya end up with 89 do ya use a channel file to name yours automatically
I have not used the channels file yet. By the same file do you mean using the newer flash file to flash the older digivox t.I am using woodcock hill.
