Hi folks, Anyone out there that has a digivox-t MDMS box setup on the C@#R#S network in Limerick. Need some help setting my box up for the first time. Cheers A
hi, im in the same boat. im in limerick bout 3- 4 miles from woodcock hill. pointed my mmds ariel at the transmitter did an auto scan, and nothing.. im using a box-t help....
Yeah, I had probs with the Digivox-T. But got her going eventually. Did a firware download ( digivox_ter_v3200 ) And then scanned. Bingo. Had to power on the antenna. Are you using a booster before your cable go's into the receiver. Also. are you putting into the normal RF in on the box??
what do you mean a booster? im using a power inserter to power the aerial if thats wat you mean. do you live in the city? im pointing it at woodcock hill out the old cratloe road. is that correct??
You need to do a factory reset, turn emu back on and scan again. As you have moved area the frequencies change.
Thanks, tryed that a few times, no joy. just realised my power inserter is only putting out 100mA! im only 3 miles from the tramsmitter with 100% clear line of sight (i.e. i can see the tramsmitter) and the same power inserter works in kildare at a much greater distance with some with a less clear line... Any help is greatly appreciated...
a few questions. 1...hi any 1 know which mast on woodcock is ch@r@s beaming from ? i can pick up T4 which is not scrambled in analogue tuner when im aiming the dipole off to the right of all the masts, im out corbally side. im getting 100 % signal and can get about 10% quality only on dvb tuner on tv. 2...how critical is the distance of the feedhorn from the mesh aerial? as the downconverter i have with built in feedhorn is not for the mesh aerial. i have old feedhorn removed and new downconverter/feedhorn placed on top of old dipole and best i can get is 10%quality moving feedhorn.?
o yea forgot to add downconverter im using is a UHF 1 incase any1 replies saying dvb tuner wont scan frequency range..
