Dragon Cam

Discussion in 'Muuta keskustelua kotiteatterista' started by Make.., Oct 6, 2004.

  1. Make..

    Make.. Member

    Joined:
    Jun 1, 2004
    Messages:
    40
    Likes Received:
    0
    Trophy Points:
    16
    Minulla olisi mahdollisuus ostaa edullisesti Dragon Cam Versio 3.01 + Dragonin latauskortti.

    -Voiko Dragonin kortin ohjelmoida Infinity USB Phoenix laitteella?
    -Tarviiko tehdä muuta kuin ladata kortille uusin päivitys Predator 2.22?
    -Mitä kanavia tolla modulilla näkyy Thorista, Siriuksesta, HotBirdistä ja Astrasta? Virittimenä minulla on Samsung DSR 9500 AY.


     
    Make.., Oct 6, 2004
    #1
  2. oKuikonen

    oKuikonen Member

    Joined:
    Jul 4, 2004
    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    11
    How to use the DragonCam

    You need:
    -Smartmouse compatible card programmer
    -The dragonload.exe program
    -The Dragon Loader Smartcard

    -Connect the card programmer to com1 or com2, make sure the programmer is in 6 MHz mode
    -Execute "dragonload.exe"
    -By pressing the "Settings" button, you can change from com1 to com2
    -Press "Connect"
    -In the file open dialog that appears, select the firmware you want to load.
    -The Dragon Loader Smartcard will now be loaded.

    Insert the programmed smartcard into the Dragon module. Insert this into a receiver
    and turn on the receiver. make sure you are tuned to an FTA channel.

    Go to the Common interface menu on the receiver, and select the "Dragon Loader" module.
    In the next menu, select "yes, Load module".
    Now a menu appears indicating that loading is in progress. To see the actual porgress percentage,
    select "refresh". There is no auto-refresh because some receivers had problems with that....

    When loading is complete, a menu appears saying "Loading successful". REMOVE the loader smartcard from the module, and switch off and turn back on the receiver.


     
    oKuikonen, Oct 11, 2004
    #2

Share This Page