Hi can anyone know how to manually put the keys in to the dreambox or wot firmware i need i have a cross over cable, my starview went down last nite but i just reset the keys its fine, now the kids are going mad cos cant fix theirs, please help guys thx
this firmware will do, hadmad made it so thank him you will also need dreamup to flash the box ya can get it in the dreambox file in downloads and you will need a null modem cable to connect the box to the computer http://rapidshare.com/files/253791665/pauls_back_up.img
wel any posts i read everyone uses a null modem cable to flash the box and an ethernet cable to ftp the box read this post http://forums.afterdawn.com/thread_view.cfm/100/647188 but if you use the image that i gave ya from hadmad you wont neet to ftp the box just flash it
Hello Ddaithi55 when you have successfully flashed the box (flash success)message pops up what exactly do you do as with my box at this stage it freezes I cannot controll it with remote or put it into standby with button on front of box the only way I can controll it is by disconnecting power momentarilly REsult is flash is gone Thanking you in advance
Just on this- Hadmad didnt actually make the image he just followed instructions and made it work and then posted it up to stop people havn to do do it themselves. Lets thank the person who actually fixed the dreambox!!
first of all im new to this as well the firmware mentioned up the page, hadmad gave me yesterday and these are the instructions he gave me what he has told me is you flash the box with it and thats it plug it in do a scan and away ya go, theres no need to ftp the box, when it asks for erase flash say no and thats it dreamboxy did it and said it works ive flashed the box but im not in dublin till the weekend to scan it so cant say if its works or not, but dreamboxy says it does and so does hadmad so its good enough for me
Hello, i have manually found out how 2 change the keys on the dream box but wen i exit n save them they seem to change any ideas? is it lower case letters u put in? the kids are doing my head in now, thx guys
When flashing the box with the null modem cable do you still have it connected to the tv?? if so dont do this When you flashed did you say no to flash erase? When flash is finished it should say flash is succesful. after this plug into tv, flick to sky sports and wait for 30 seconds then flick to the next few channels and all the channels should be back
Pity Ididnt get your message a few minutes earlier I was getting message flash successful but couldnt go any further probably because I had it plugged into tv Bricked now Thanks very much
just to say i never said i made this img this is just a back up of my box that i ftp and remove some files to get working and then made a back up with dreamup as peeps were having probs with ftp this is why it is pauls_ back - up .img
here is an back up img from dublin just load with dream up and thats it http://rapidshare.com/files/253791665/pauls_back_up.img this img is ready made just load and go i have tested it and is working grand this is my org post on page 100 of Dreambox 500T 500C Fixes here
