DVD Shrink reads the DVD, files are on the hard drive but then I get the message that the burn has failed. Havetried a number of different brands of DVDs. Help..... Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/10/26 18:35:34 Nero Version: 6.6.0.16 Internal Version: 6, 6, 0, 16b (Nero Express) Recorder: <SONY DVD+RW DW-P50A> Version: 1.8f - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 Drive buffer : 8192kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD+RW DW-P50A >Version: 1.8f - HA 1 TA 0 - 6.6.0.16 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD+RW DW-P50A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD+RW DW-P50A E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523632kB) Free physical memory: 75MB (77296kB) Memory in use : 85 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 17.7.2008 UDF/ISO compilation 13:41:44 #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 13:41:44 #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 13:41:45 #3 Text 0 File Isodoc.cpp, Line 6356 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 13:41:45 #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 13:41:45 #5 Text 0 File Reader.cpp, Line 127 Reader running 13:41:45 #6 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 13:41:45 #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 13:41:45 #8 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 13:41:46 #9 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286127 (508:01.52, 4465MB) 13:41:46 #10 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 13:41:46 #11 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: SONY DVD+RW DW-P50A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 13:41:46 #12 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:41:46 #13 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [SONY DVD+RW DW-P50A] -------------------------------------------------------------- 13:41:46 #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [SONY DVD+RW DW-P50A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286128 | lead-out | 1 | 0x41 | 0x00 13:41:47 #15 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 13:41:47 #16 Text 0 File Burncd.cpp, Line 4120 Cache writing successful. 13:41:47 #17 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 13:41:47 #18 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 1x (1,385 KB/s) 13:41:47 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2654 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 13:41:47 #20 Text 0 File DVDR.cpp, Line 2379 Recording mode: Sequential Recording Mode 13:41:47 #21 Text 0 File Mmc.cpp, Line 21708 Set BUFE: Power-Burn -> ON 13:41:47 #22 Text 0 File DVDR.cpp, Line 2534 Start write address at LBA 0 DVD high compatibility mode: Yes 13:41:47 #23 Text 0 File Cdrdrv.cpp, Line 8862 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 13:41:47 #24 SCSI -1046 File Cdrdrv.cpp, Line 1180 SCSI Exec, HA 1, TA 0, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE2 0x30 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x30 0x05 13:41:47 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1771 Illegal disc 13:41:47 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1771 Could not perform start of Disc-at-once 13:41:47 #27 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 1x (1,385 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2006/10/05 04:42:42 File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2002/11/05 15:16:52 File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 2006/09/27 23:53:22 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.5512 (xpsp.080413-2108), size=96512 bytes, created 2008/04/13 20:40:30 (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Way too much going on here other than burning. Try not to multitask while you burn. With that blank media, you're burning too close to the edge of the disc. Try better media, like Taiyo Yuden, Verbatim, or Sony and set your target output size between 4300 and 4400 MB. Burn a 6x or 8x max...or half the rated speed of the disc.
Moved to relevant forum... You also have Roxio running on your PC, it has a tendancy to mess with other burning programs especially Nero. My suggestion is to remove it with RoxioZap, but if the other solutions fix your problems and you do use Roxio then it would be fine to leave it for now. And to be perfectly honest with you, the drive hasn't seen support in four years and you will probably not get any decent results with modern media. It might be time to look at an external drive that you can hook up via USB. http://h10025.www1.hp.com/ewfrf/wc/...tool=softwareCategory&softwareitem=ob-21637-1
