nero 6.6 or one click dvd want copy. been copying with no trouble. stops copying around 73%. could someone please help. here is a log file.donnie lockard 1A22-0206-0530-1610-5715-1441* Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM Nero Version: 6.6.0.18 Internal Version: 6, 6, 0, 18e Recorder: <SONY DVD RW DRU-720A> Version: JY08 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <SONY DVD RW DRU-720A >Version: JY08 - HA 1 TA 0 - 6.6.0.18 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD400EB-00CPF0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SONY DVD RW DRU-720A E: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 39845888 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 246MB (252908kB) Free physical memory: 70MB (71768kB) Memory in use : 71 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 22.3.2009 UDF/ISO compilation 3:23:48 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation started 3:23:49 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832 DVD-Video files reallocation completed (no file modified) 3:23:49 PM #3 Text 0 File Isodoc.cpp, Line 6359 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 3:23:49 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 3:23:49 PM #5 Text 0 File Reader.cpp, Line 127 Reader running 3:23:49 PM #6 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-720A running 3:23:49 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 3:23:49 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309 First writeable address = 0 (0x00000000) 3:23:49 PM #9 Text 0 File Burncd.cpp, Line 3233 Turn on Disc-At-Once, using DVD media 3:23:49 PM #10 Text 0 File DlgWaitCD.cpp, Line 270 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 1390367 (308:58.17, 2715MB) 3:23:49 PM #11 Text 0 File DlgWaitCD.cpp, Line 282 Write in overburning mode: NO (enabled: CD) 3:23:49 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483 Recorder: SONY DVD RW DRU-720A, Media type: DVD-R Disc Manufacturer: RITEKF - 1 Disc Application Code: 64, Disc Physical Code: 193 3:23:49 PM #13 Text 0 File DlgWaitCD.cpp, Line 448 >>> Protocol of DlgWaitCD activities: <<< ========================================= 3:23:49 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1390368 (1390368) = #1390368/308:58.18 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1390368 blocks [SONY DVD RW DRU-720A] -------------------------------------------------------------- 3:23:49 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051 Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2847473664, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1390368 | lead-out | 1 | 0x41 | 0x00 3:23:50 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 3:23:50 PM #17 Text 0 File Burncd.cpp, Line 4122 Cache writing successful. 3:23:50 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 3:23:50 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11,080 KB/s) 3:23:50 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 3:23:50 PM #21 Text 0 File DVDR.cpp, Line 2571 Recording mode: Sequential Recording Mode 3:23:50 PM #22 Text 0 File Mmc.cpp, Line 21774 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 3:23:50 PM #23 Text 0 File DVDR.cpp, Line 2726 Start write address at LBA 0 DVD high compatibility mode: Yes 3:23:50 PM #24 Text 0 File Cdrdrv.cpp, Line 8892 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 3:25:14 PM #25 Text 0 File Cdrdrv.cpp, Line 1288 15:25:14.828 - SONY DVD RW DRU-720A\H1 T0 : Queue again later 3:29:31 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x045A0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 0x00 0x00 0x0E 0xE1 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x0C 0x00 3:29:31 PM #27 CDR -1135 File Writer.cpp, Line 311 Write error 3:29:32 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 3:29:33 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 3:29:33 PM #30 Text 0 File DVDR.cpp, Line 2969 EndDAO: Last written address was 975327 3:29:33 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11,080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.51a, size=17136 bytes, created 5/2/2003 11:02:00 AM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Your RAM (256MB) may not be enough even for XP. Though if you have been copying without trouble, it must not be a cause. “KEY_MEDIUM_ERROR” suggests a bad media. Though unless the disc is from new batch (package), it may not be a cause either. Unless you have made some change on your PC, like new software installation, updates, and/or hardware changes, and have been copying without troubles, it is possible your burner has a problem…
Your Firmware is up-to-date (2005) It might be time for a new burner. and upgraded memory. You could try to burn with Imgburn. Burn at 4X. You Could also try using a Cheaper Brand of Blank Media like (Oh God) Memorex. Also Edit Out Your Serial #, It Begins with 1A22, Donnie To Sum it up AGE has Caught up with your Burner.
