here is the error that pops up after about 15-20 seconds after writing process begins I/O Error! Device: [2:0:0] LITE-ON DVDRW SOHW-832S VPDE (D (ATA) ScsiStatus: 0x02 Interpretation: Check Condition CDB: 2A 00 00 00 00 20 00 00 20 00 Interpretation: Write (10) - Sectors: 32-63 Sense Area: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00 00 00 Interpretation: Write Error (Retry) (Cancel) when i click retry it just pops back up here is the log after i click cancel I 11:09:21 DVD Decrypter Version 3.5.1.0 started! I 11:09:21 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2) I 11:09:21 Initialising SPTI... I 11:09:21 Searching for SCSI / ATAPI devices... I 11:09:21 Found 1 CD-ROM and 1 DVD±RW! I 11:09:32 Operation Started! I 11:09:32 Source File: C:\MK.MDS I 11:09:32 Source File Sectors: 2,132,224 (MODE1/2048) I 11:09:32 Source File Size: 4,366,794,752 bytes I 11:09:32 Destination Device: [2:0:0] LITE-ON DVDRW SOHW-832S VPDE (D (ATA) I 11:09:32 Destination Media Type: DVD-R (Disc ID: ProdiscF02) (Speeds: 2x, 4x) I 11:09:32 Destination Media Sectors: 2,298,496 I 11:09:32 Write Mode: DVD I 11:09:32 Write Speed: 1x I 11:09:32 Test Mode: No I 11:09:32 BURN-Proof: Enabled W 11:09:32 [2:0:0] LITE-ON DVDRW SOHW-832S VPDE (D (ATA) - Selected Write Speed: 1,385 KB/s (1x) W 11:09:32 [2:0:0] LITE-ON DVDRW SOHW-832S VPDE (D (ATA) - Actual Write Speed: 5,540 KB/s (4x) I 11:09:32 Filling Buffer... I 11:09:35 Writing LeadIn... E 11:10:32 Failed to Write Sectors 32 - 63 - Command Sequence Error I 11:10:32 Synchronising Cache... E 11:10:32 Failed to Write Image! E 11:10:32 Operation Failed! - Duration: 00:01:00 I 11:10:32 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 6 KB/s (0.0x) im using fujifilm dvd-r's my comp is the hp pavilion a720n during the writing process at the bottom it first fills the buffer blah blah blah then it gets to "writing leadin", thats were it goes it stays on writing leadin for about 10 seconds before popping up that error up there i tried updating the firmware using live update but it said "no devices found use firmware" please help someone it was working fine 2 days ago now it wont burn anything i tried using alcohol 120% but that didnt burn either it seems like the same problem thank you to whoever wants to help me
You defiantly need a firmware update from the VPDE you have installed now. The firmware version is now VSOM and you can get the firmware from the link below (I have linked it directly to the firmware which is hosted on Lite-Ons website)... http://www.liteonamericas.com/twnmain/DOWNLOADS/ODD/SOHW-832S/firmware/DR8VS0M.zip If you still have problems I would suggest trying different media. (It could be a compatibility issue with the media) The Media you are using ProdiscF02 is listed under 2nd class media and it is recommended to use 1st Class Media for Video burning. Below is the media guide that list this information... http://www.digitalfaq.com/media/dvdmedia.htm
i downloaded it and tryed installing it but the this error message No matched drive detected! This utility is only for LITE-ON DVDRW SOHW-832S drive. Detected drives : 2-0-0-0 D:LITE-ON DVDRW SOHW-832S VPDE 2-0-1-0 E:SAMSUNG CD-ROM SC-148A B402 what should i try now ps sorry for doubleposting i didnt know im a "newbie"
That makes allot of sense. LOL It says: No matched drive detected! This utility is only for LITE-ON DVDRW SOHW-832S drive But yet it is detecting D:LITE-ON DVDRW SOHW-832S VPDE. Try to uninstall the DVD drive and have windows reinstall it. Do this by doing the below steps... START/CONTROL PANEL/SYSTEM/HARDWARE TAB/DEVICE MANAGER Now double click the CD/DVD ROM Devices so it will branch down. Find the LITE-ON DVDRW SOHW-832S drive and right click and choose uninstall. Now reboot your system and windows will install the drive again and then try to update the firmware.
ya i was pretty confused by it lol it didnt make any sense but im goin to try it thanks for your help seriously
The only thing I can think of why it is not updating is if the DVD drive came with your HP computer and it has an OEM firmware on it. I went to HP site and they say the latest firmware version for your drive is the firmware you are using. But if you go to Lite-On site there is a newer firmware out for that Model number. So maybe since its an OEM drive installed on your HP computer the Lite-On Firmware can't be installed on the drive. Maybe someone else will come along and can give you other things to try.
ya i uninstalled it but it didnt change nothing thanks for all your help now that we didnt get anything done could i repost the subject again and see if anyone else has any sugestions or not?again thankyou
Is this a Play Station Disk you are trying to copy? If so, have you ever been able to copy a Play Station disk using DVDDecrypter before this one?
I think it has to do with having the HP OEM version of firmware on the drive. So you can not use a Lite-On update to flash to the updated firmware. But you could use a patched version update to update to the VSOM version. code guys have a patched version of the firmware that other people have used with the HP OEM versions of that Lite-On model and have had success with it. If your interested you can get patched firmware from the site below... http://codeguys.rpc1.org/index.html
i made 2 or 3 playstation games on jan.8th but as of like jan 8th like around 9:30 pm it stopped working what do i do on this site should i go to patches or dvd drives? ps its not the discs i tried the same discs on another comp. and they worked fine i also used some sony discs on mine and nothing thank you for helping
thank you all who helped me seriously i downloaded the patch and it now works again. again thank you very much i was about to just go buy a new burner
Yeah, Ive got the same problem. But It detected: 2-0-0-0 D:LITE-ON DVD+RW SOWH-822S VPPA please send one of those firmware updates my way.
