I am having trouble copying dvd's by using Ripit4me, then DVD dycrypter, DVD shrink, and finally nero with Sony DVD burner. When I go through the whole process of "copying just the movie" and finally burn the new copied DVD, I cannot show all the dvd on my BOSE dvd player. It cannot read the disk after about half way through it. Then when I restarted the DVD and went to the next chapter of the movie it finished ok. How do I make sure the new copied dvd's will play all the way through? Thanks, Scott
I was copying "My Cousin Vinny", All of my firmware should be up to date. I always check for updates. Ripit4me automatically will tell you if there are any updates. I also had a similar problem when I copied SHREK. The copy was good until before the start of ch8, then would not play, but if I restarted it and fast forwarded to ch8 it played the rest. Here is my log for the last few. ====== *** NeroAPI, History File *** ====== 1c8200k719e5maax4005749ca125 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 4:54:32 PM NT-SPTI used Nero API version: 7.0.1.3 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 0, 1, 3 Recorder: <SONY DVD RW DRU-810A> Version: 1.0a - HA 1 TA 1 - 7.0.1.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 YAR4 Pnp680 Port 0 ID 1 DMA: Off CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 1 ID 1 DMA: On DiskPeripheral : ST3120023AS atapi Port 2 ID 0 DMA: On DiskPeripheral : ST3120023AS atapi Port 3 ID 0 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 SONY DVD RW DRU-810A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047548kB) Free physical memory: 362MB (371408kB) Memory in use : 64 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 7.4.2007 NeroAPI 8:08:03 PM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 8:08:03 PM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 8:08:03 PM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 8:08:03 PM #4 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 8:08:03 PM #5 Text 0 File Reader.cpp, Line 124 Reader running 8:08:03 PM #6 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DRU-810A running 8:08:03 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 8:08:03 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 8:08:03 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 8:08:03 PM #10 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using DVD media 8:08:04 PM #11 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 8:08:04 PM #12 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO 8:08:04 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: SONY DVD RW DRU-810A, Media type: DVD+R 8:08:04 PM #14 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:08:04 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [E: SONY DVD RW DRU-810A] -------------------------------------------------------------- 8:08:04 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 8:08:04 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:08:04 PM #18 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 8:08:04 PM #19 Text 0 File Burncd.cpp, Line 4176 Cache writing successful. 8:08:04 PM #20 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 8:08:04 PM #21 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 16x (22,160 KB/s) 8:08:04 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 8:08:04 PM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 323 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x03ebe600: Len x804 8:08:04 PM #24 Text 0 File DVDR.cpp, Line 6192 Drive: SONY DVD RW DRU-810A Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 8:08:04 PM #25 CDR -1211 File DVDR.cpp, Line 5321 Book Type set to: DVD-ROM 8:08:04 PM #26 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 8:13:48 PM #27 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DRU-810A> start writing Lead-Out at LBA 2286112 (22E220h), length 0 blocks 8:13:48 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 8:14:01 PM #29 Text 0 File DVDR.cpp, Line 6192 Drive: SONY DVD RW DRU-810A Book Type request [gen]: DVD+R, write to EEPROM Changing the Book Type was finished successfully, return code 0 8:14:01 PM #30 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 16x (22,160 KB/s) 8:14:02 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 8:14:02 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/16/2006 4:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.42a, size=36592 bytes, created 8/16/2006 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ====== 1c8200k719e5maax4005749ca125 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 4:54:32 PM NT-SPTI used Nero API version: 7.0.1.3 Using interface version: 6.3.1.4 Installed in: C:\Program Files\Nero\Nero 7\Core\ Application: ahead\Nero - Burning Rom Internal Version: 7, 0, 1, 3 Recorder: <SONY DVD RW DRU-810A> Version: 1.0a - HA 1 TA 1 - 7.0.1.3 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? === Scsi-Device-Map === DiskPeripheral : Maxtor 6Y160P0 YAR4 Pnp680 Port 0 ID 1 DMA: Off CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: Off CdRomPeripheral : SONY DVD RW DRU-810A atapi Port 1 ID 1 DMA: On DiskPeripheral : ST3120023AS atapi Port 2 ID 0 DMA: On DiskPeripheral : ST3120023AS atapi Port 3 ID 0 DMA: On === CDRom-Device-Map === LITEON DVD-ROM LTD163 D: CDRom0 SONY DVD RW DRU-810A E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1022MB (1047548kB) Free physical memory: 338MB (346840kB) Memory in use : 66 Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 8.4.2007 NeroAPI 10:15:50 AM #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 10:15:50 AM #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 10:15:50 AM #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 10:15:50 AM #4 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 10:15:50 AM #5 Text 0 File Reader.cpp, Line 124 Reader running 10:15:50 AM #6 Text 0 File Writer.cpp, Line 113 Writer E: SONY DVD RW DRU-810A running 10:15:50 AM #7 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 10:15:50 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:15:50 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312 First writeable address = 0 (0x00000000) 10:15:50 AM #10 Text 0 File Burncd.cpp, Line 3342 Turn on Disc-At-Once, using DVD media 10:15:51 AM #11 Text 0 File DlgWaitCD.cpp, Line 279 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1897647 (421:41.72, 3706MB) 10:15:51 AM #12 Text 0 File DlgWaitCD.cpp, Line 291 Write in overburning mode: NO 10:15:51 AM #13 Text 0 File DlgWaitCD.cpp, Line 2578 Recorder: SONY DVD RW DRU-810A, Media type: DVD+R 10:15:51 AM #14 Text 0 File DlgWaitCD.cpp, Line 458 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:15:51 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 1897648 (1897648) = #1897648/421:41.73 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1897648 blocks [E: SONY DVD RW DRU-810A] -------------------------------------------------------------- 10:15:51 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: SONY DVD RW DRU-810A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3886383104, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1897648 | lead-out | 1 | 0x41 | 0x00 10:15:51 AM #17 Text 0 File SCSIPassThrough.cpp, Line 36 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:15:51 AM #18 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 10:15:51 AM #19 Text 0 File Burncd.cpp, Line 4176 Cache writing successful. 10:15:51 AM #20 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 10:15:51 AM #21 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 16x (22,160 KB/s) 10:15:51 AM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 10:15:51 AM #23 SPTI -1066 File SCSIPassThrough.cpp, Line 323 E: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 Buffer x0454f800: Len x804 10:15:51 AM #24 Text 0 File DVDR.cpp, Line 6192 Drive: SONY DVD RW DRU-810A Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 10:15:51 AM #25 CDR -1211 File DVDR.cpp, Line 5321 Book Type set to: DVD-ROM 10:15:51 AM #26 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 10:20:53 AM #27 Text 0 File WriterStatus.cpp, Line 116 <E: SONY DVD RW DRU-810A> start writing Lead-Out at LBA 1897648 (1CF4B0h), length 0 blocks 10:20:53 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 10:21:06 AM #29 Text 0 File DVDR.cpp, Line 6192 Drive: SONY DVD RW DRU-810A Book Type request [gen]: DVD+R, write to EEPROM Changing the Book Type was finished successfully, return code 0 10:21:06 AM #30 Phase 37 File APIProgress.cpp, Line 278 Burn process completed successfully at 16x (22,160 KB/s) 10:21:07 AM #31 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 10:21:07 AM #32 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/16/2006 4:00:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.42a, size=36592 bytes, created 8/16/2006 4:00:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** NeroAPI, History File *** ======
