Eli oon nyt pari kertaa yrittäny polttaa Lostia ja muita ohjelmia DVD levyiksi, mutta jostain syystä se ei suostu polttamaan. Ohjelmana käytän neroa, kokeiluversiota. Levyinä käytän Verbatim 16x DVD R levyjä. Tuossa on yksi viimeisimmän polttokokeilun logi: AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 331MB (339172kB) Memory in use : 35 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.4.2006 Burn DVD Image 15:13:14 #1 Text 0 File ThreadedTransfer.cpp, Line 531 ReadBuffer-Pipe got 72704KB of Memory 15:13:14 #2 Text 0 File Reader.cpp, Line 124 Reader running 15:13:14 #3 Text 0 File Writer.cpp, Line 113 Writer E: _NEC DVD+RW ND-2100AD running 15:13:14 #4 Text 0 File Burncd.cpp, Line 3353 Turn on Disc-At-Once, using DVD media 15:13:14 #5 Text 0 File DlgWaitCD.cpp, Line 289 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1690597 (375:41.22, 3301MB) 15:13:14 #6 Text 0 File DlgWaitCD.cpp, Line 301 Write in overburning mode: NO (enabled: CD) 15:13:14 #7 Text 0 File DlgWaitCD.cpp, Line 2715 Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R 15:13:14 #8 Text 0 File DlgWaitCD.cpp, Line 473 >>> Protocol of DlgWaitCD activities: <<< ========================================= 15:13:14 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1690598 (1690598) = #1690598/375:41.23 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1690598 blocks [E: _NEC DVD+RW ND-2100AD] -------------------------------------------------------------- 15:13:14 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059 Prepare recorder [E: _NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3462344704, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 1690598 | lead-out | 1 | 0x41 | 0x00 15:13:14 #11 Text 0 File SCSIPassThrough.cpp, Line 39 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 15:13:14 #12 Text 0 File SCSIPassThrough.cpp, Line 84 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 15:13:14 #13 Phase 24 File dlgbrnst.cpp, Line 1730 Caching of files started 15:13:14 #14 Text 0 File Burncd.cpp, Line 4187 Cache writing successful. 15:13:14 #15 Phase 25 File dlgbrnst.cpp, Line 1730 Caching of files completed 15:13:14 #16 Phase 28 File dlgbrnst.cpp, Line 1730 Speed measurement started 15:13:14 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 15:17:06 #18 Text 0 File WriterStatus.cpp, Line 116 <E: _NEC DVD+RW ND-2100AD> start writing Lead-Out at LBA 1690598 (19CBE6h), length 0 blocks 15:17:07 #19 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 15:17:07 #20 Phase 29 File dlgbrnst.cpp, Line 1679 Speed measurement completed: 10.6x (14 684 KB/s) 15:17:08 #21 Phase 36 File dlgbrnst.cpp, Line 1730 Burn process started at 4x (5 540 KB/s) 15:17:09 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 15:17:10 #23 SPTI -1066 File SCSIPassThrough.cpp, Line 290 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07 Buffer x04fad400: Len x804 15:17:10 #24 SPTI -1066 File SCSIPassThrough.cpp, Line 290 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x033eac00: Len x6 15:17:10 #25 Text 0 File DVDR.cpp, Line 6514 Drive: _NEC DVD+RW ND-2100AD Book Type request [gen]: ?, write to EEPROM Changing the Book Type was finished successfully, return code 0 15:17:11 #26 Text 0 File DVDR.cpp, Line 6514 Drive: _NEC DVD+RW ND-2100AD Book Type request [gen]: DVD-ROM, write to EEPROM Changing the Book Type was finished successfully, return code 0 15:17:11 #27 CDR -1207 File DVDR.cpp, Line 5649 Book Type automatically set to: DVD-ROM 15:17:11 #28 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: No 15:17:44 #29 SPTI -1106 File SCSIPassThrough.cpp, Line 290 E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x05880000: Len x10000 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 15:17:44 #30 CDR -1106 File Writer.cpp, Line 302 Power calibration error E: _NEC DVD+RW ND-2100AD 15:17:44 #31 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 15:17:45 #32 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 15:17:46 #33 Text 0 File DVDR.cpp, Line 6514 Drive: _NEC DVD+RW ND-2100AD Book Type request [gen]: DVD+R, write to EEPROM Changing the Book Type was finished successfully, return code 0 15:17:46 #34 Phase 38 File dlgbrnst.cpp, Line 1730 Burn process failed at 4x (5 540 KB/s)
no mullaki ois yks kysymys siihen kun rupean polttamaan vaikka elokuvia DVD levylle nii kaikki menee siihe asti oikein kunnes pitää valita se "Nykyinen Tallennin" niin siihen en voi valita mitään niin mikä olis ongelmana???
