DVD-RAM LG GSA-H22L CAN'T BURN - TRACK FOLLOWING ERROR, COUND NOT PERFORM ENDTRACK, HELP PLS!!!

I tried burning first an image to a cdr and nero express gives me a track following error,and i got the latest nero, updated the firmware, check if its in DMA and it is, here's the log:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0

Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22L atapi Port 1 ID 1 DMA: On

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H22L E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 488MB (500700kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.6.2007
CD Image
2:35:54 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

2:35:55 PM #2 Text 0 File Burncd.cpp, Line 3196
HL-DT-ST DVD-RAM GSA-H22L
Buffer underrun protection activated

2:35:55 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 613797888
CUES:
MTYP: Mediumtype = CD (old format) (0x1)
Image file name: <C:\Documents and Settings\aileen\My Documents\My Completed Downloads\WindowsXPSP2.nrg>

2:35:55 PM #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using CD-R/RW media

2:35:55 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 299555 ( 66:36.05)

2:35:55 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

2:35:55 PM #7 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: HL-DT-ST DVD-RAM GSA-H22L;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

2:35:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

2:35:55 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - CD-ROM Mode 1, Joliet)
2 indices, index0 (150) provided
original disc pos #0 + 299556 (299556) = #299556/66:34.6
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 299556 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
--------------------------------------------------------------

2:35:55 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 613797888, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 299556 | 0 | 0x00
299556 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

2:36:15 PM #11 Text 0 File SCSIPTICommands.cpp, Line 238
Error on LockVolume: Access is denied.


2:36:15 PM #12 Text 0 File SCSIPTICommands.cpp, Line 288
SPTI - Error 5 on DismountVolue: Access is denied.


2:36:25 PM #13 Text 0 File SCSIPTICommands.cpp, Line 238
Error on LockVolume: Access is denied.


2:36:25 PM #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

2:36:25 PM #15 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

2:36:25 PM #16 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

2:36:25 PM #17 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

2:36:25 PM #18 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 48x (7,200 KB/s)

2:36:25 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

2:36:25 PM #20 Text 0 File MMC.cpp, Line 17687
StartDAO : CD-Text - Off

2:36:25 PM #21 Text 0 File MMC.cpp, Line 22363
Set BUFE: Buffer underrun protection -> ON

2:36:25 PM #22 Text 0 File MMC.cpp, Line 17915
CueData, Len=32
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 aa 01 14 00 42 24 06

2:36:25 PM #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

2:38:28 PM #24 SPTI -1119 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 0D 20 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09
Buffer x07c71bc0: Len x10000
0x57 FD D1 F9 AC 70 D7 12 BE 5C 3A F1 10 01 62 3C
0x8D AC 8E 2E 3D 7F A9 FD 8E 04 FE C9 D0 54 DF F1
0xE0 F4 39 E8 50 A3 AB 14 33 3F 07 C6 C3 55 7B 6E

2:38:28 PM #25 CDR -1119 File Writer.cpp, Line 303
Track following error
E: HL-DT-ST DVD-RAM GSA-H22L

2:38:28 PM #26 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 48x (7,200 KB/s)

2:38:35 PM #27 Text 0 File SCSIPTICommands.cpp, Line 288
SPTI - Error 5 on DismountVolue: Access is denied.


2:38:40 PM #28 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

2:38:40 PM #29 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


THEN I TRIED BURNING A DATA ON A DVD, IT'S ALSO GIVES AN ERROR, HERE'S THE LOG:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22L atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H22L E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 371MB (380168kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.6.2007
ISO compilation
4:11:00 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

4:11:01 PM #2 Text 0 File Isodoc.cpp, Line 6663
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:11:01 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

4:11:01 PM #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media

4:11:01 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 147135 ( 32:41.60, 287MB)

4:11:01 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

4:11:01 PM #7 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: HL-DT-ST DVD-RAM GSA-H22L, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7

4:11:01 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:11:01 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 147136 (147136) = #147136/32:41.61
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 147136 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
--------------------------------------------------------------

4:11:13 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 301334528, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 147136 | 0 | 0x00
147136 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

4:11:13 PM #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

4:11:13 PM #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

4:11:13 PM #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

4:11:13 PM #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

4:11:13 PM #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

4:11:13 PM #16 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 16x (22,160 KB/s)

4:11:13 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:11:13 PM #18 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MBIPG101
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 42 49 50 47 - 31 30 31 52 30 35 01 38 ...MBIPG101R05.8
23 54 37 13 02 50 6B 02 - 8C 63 15 15 0B 0B 08 08 #T7..Pk..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

4:11:13 PM #19 Text 0 File DVDR.cpp, Line 6553
Drive: HL-DT-ST DVD-RAM GSA-H22L
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0

4:11:13 PM #20 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM

4:11:13 PM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x062957c0: Len x648

4:11:13 PM #22 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: No

4:11:13 PM #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

4:15:35 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x07340040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

4:15:35 PM #25 CDR -1135 File Writer.cpp, Line 303
Write error
E: HL-DT-ST DVD-RAM GSA-H22L

4:15:35 PM #26 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 0

4:15:35 PM #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 16x (22,160 KB/s)

4:15:47 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:15:52 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

4:15:52 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


AND LASTLY I TRIED BURNING ON A MINIDISC, ALSO NERO GIVES ME AN ERROR:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0
(Nero Express)
Recorder: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-RAM GSA-H22L>Version: 1.02 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340014A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RAM GSA-H22L atapi Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-RAM GSA-H22L E: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 767MB (785904kB)
Free physical memory: 377MB (386120kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.6.2007
CD-ROM (ISO)
4:21:19 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

4:21:19 PM #2 Text 0 File Isodoc.cpp, Line 6663
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:21:19 PM #3 Text 0 File Burncd.cpp, Line 3196
HL-DT-ST DVD-RAM GSA-H22L
Buffer underrun protection activated

4:21:19 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)

4:21:19 PM #5 Text 0 File Burncd.cpp, Line 3508
Turn on Track-At-Once, using CD-R/RW media

4:21:20 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 102450 ( 22:48.00)
Last address to be written: 91619 ( 20:23.44)

4:21:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)

4:21:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: HL-DT-ST DVD-RAM GSA-H22L;
CDR code: 00 97 24 11; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 18 0B (LI 97:24.11), 3: 16 30 01 (LO 22:48.01)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 00 00 (invalid)

4:21:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:21:20 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 91620 (91620) = #91620/20:21.45
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 91618 blocks [E: HL-DT-ST DVD-RAM GSA-H22L]
--------------------------------------------------------------

4:21:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: HL-DT-ST DVD-RAM GSA-H22L] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 187944960, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 91620 | 0 | 0x00
91620 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

4:21:20 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 1. Length: 91620 -> 91618.

4:21:20 PM #13 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

4:21:20 PM #14 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)

4:21:20 PM #15 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started

4:21:20 PM #16 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.

4:21:20 PM #17 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed

4:21:20 PM #18 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 24x (3,600 KB/s)

4:21:20 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:21:20 PM #20 Text 0 File MMC.cpp, Line 22363
Set BUFE: Buffer underrun protection -> ON

4:21:20 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800

4:23:26 PM #22 SPTI -1119 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1119)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 0E 20 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0E 00 00 00 00 09
Buffer x07d51c80: Len x10000
0xA0 62 E3 E7 74 A7 51 BB 8D 1E C1 D3 B4 C9 88 38
0x58 B8 63 E5 3F CC 85 39 D0 20 49 CD F2 3B 3F D2
0x00 00 01 99 29 DE 56 97 4F 16 22 23 4F A9 4F B6

4:23:26 PM #23 CDR -1119 File Writer.cpp, Line 303
Track following error
E: HL-DT-ST DVD-RAM GSA-H22L

4:23:26 PM #24 CDR -201 File WriterStatus.cpp, Line 195
Invalid write state
E: HL-DT-ST DVD-RAM GSA-H22L

4:23:39 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 195
Could not perform EndTrack

4:23:43 PM #26 Text 0 File MMC.cpp, Line 17131
<HL-DT-STDVD-RAM GSA-H22L> start Close Session

4:24:37 PM #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 24x (3,600 KB/s)

4:24:53 PM #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

4:24:58 PM #29 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed

4:24:58 PM #30 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


I'M GOING CRAZY, I CAN'T BURN ANYTHING, I'M GOING LOCO, PLS SOMEBODY HELP ME!!!!PLS

 

Can you make the burner the master on the secondary on the end of the cable?
Similar to this.
CdRomPeripheral HL-DT-ST DVD-RAM GSA-H22N atapi Port 1 ID 0 DMA: On