Hi to everyone in the forum, does anyone to know how to make work AutoQMatEnc with DVD-RB? When I start to encode a dvd, after pressed the "Encode" button I see this kind of error and of course, everything stops: - Creating M2V for VTS_02 segment 31 -- V02003100019001 no .M2V, retrying. - Creating M2V for VTS_02 segment 31 -- V02003100019001 no .M2V, retrying. - Creating M2V for VTS_02 segment 31 - Failed to create M2V: V02003100019001 - The encoder doesn't appear functional. - Aborting... What I'm missing? How can I set-up DVD-RB Pro to make it works with AQE? Hope someone will give to me any reasonable solution, I'll really appreciate that. Bye, Stefano.
Can you post the full log? What version of Avistnth are you using? Edit: It appears you have gotten all the way to segment 31 and it stopped. I would guess a bad rip.
Hi dialysys1, hear it is a full log for you: [10:00:31] Phase I, PREPARATION started. - DVD-RB v1.26.6 - AVISYNTH 2.5.8.0 - AutoQMatEnc 0.34.0.1 selected. - AVS Filters are enabled. - Source: THE_GOLDEN_COMPASS - VTSM_01: 39,913 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 1,704 frames. -- Building .AVS and .ECL files - VTS_01: 108 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 7 frames. -- Building .AVS and .ECL files - VTS_06: 2,548,652 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 162,937 frames. -- Building .AVS and .ECL files - Reduction Level for DVD-5: 83.0% - Overall Bitrate : 4,559Kbs - Space for Video : 3,664,858KB - Analyzing VTS_06 for optimal CQ factor. -- TargetSize (sectors):1,829,979 -- Sampling 1635 of 162937 frames. -- Predicted size (sectors) at CQ=2.3: 2,129,657 -- Predicted size (sectors) at CQ=2.6: 1,838,316 - CQ Value selected: 2.6 - Redistributing using Final_Q: 26 - HIGH/LOW/TYPICAL Bitrates: 8,232/2,844/4,559 Kbs [10:17:13] Phase I, PREPARATION completed in 17 minutes. [10:18:36] Phase II ENCODING started - Creating M2V for VTSM_01 segment 0 -- W01000000001001 no .M2V, retrying. - Creating M2V for VTSM_01 segment 0 -- W01000000001001 no .M2V, retrying. - Creating M2V for VTSM_01 segment 0 - Failed to create M2V: W01000000001001 - The encoder doesn't appear functional. - Aborting... I ripped with AnyDVD 6.4.2.1 and if I encode with CCE, ProCoder2 or HC or if I transcode with Rejig, everything goes right, so I suppose the problem is somewhere else. Thanks for the replay! Stefano.
First update Rebuilder to version 1.28.2. Second: AVS Filters are enabled. This is most likely where the problem lies. Try removing any Avisynth filters and then process. If it works, then you know the problem is with the script.
How can I remove all AVS flter temporally? Have I to go in DVD-RB Settings>Options>Filter Editor(Active), double click in it and remove all in side the box? Is it right? Sorry but I'm not so expert... Bye, Stefano.
Sorry mate but look a that... I de-activated all AVS-filters but it doesn't seem to work as well. [14:19:10] Phase I, PREPARATION started. - DVD-RB v1.26.6 - AVISYNTH 2.5.8.0 - AutoQMatEnc 0.34.0.1 selected. - Source: THE_GOLDEN_COMPASS - VTSM_01: 39,913 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 1,704 frames. -- Building .AVS and .ECL files - VTS_01: 108 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 7 frames. -- Building .AVS and .ECL files - VTS_06: 2,548,652 sectors. -- Scanning and writing .D2V & .AVS files -- Processed 162,937 frames. -- Building .AVS and .ECL files - Reduction Level for DVD-5: 83.0% - Overall Bitrate : 4,559Kbs - Space for Video : 3,664,858KB - Analyzing VTS_06 for optimal CQ factor. -- TargetSize (sectors):1,829,979 -- Sampling 1635 of 162937 frames. -- Predicted size (sectors) at CQ=2.3: 2,129,657 -- Predicted size (sectors) at CQ=2.6: 1,838,316 - CQ Value selected: 2.6 - Redistributing using Final_Q: 26 - HIGH/LOW/TYPICAL Bitrates: 8,232/2,844/4,559 Kbs [14:34:24] Phase I, PREPARATION completed in 15 minutes. [14:34:37] Phase II ENCODING started - Creating M2V for VTSM_01 segment 0 -- W01000000001001 no .M2V, retrying. - Creating M2V for VTSM_01 segment 0 -- W01000000001001 no .M2V, retrying. - Creating M2V for VTSM_01 segment 0 - Failed to create M2V: W01000000001001 - The encoder doesn't appear functional. - Aborting... May be I should use the latest DVD-RB release. In any case I really do appreciate your help, Bye, Stefano.
You still haven't updated Rebuilder to the latest version. There have been 5 updates since the version you have.
I read somewhere that I don't need any path in rebuilder.ini file because DVD-RB Pro takes care itself to call Autoqmatenc. In any case in my past test I even added the path in the rebuilder.ini with no luck as weel.
