i used the discinfo utility and it gave me a summary of my dvr-109. can anyone tell me whats up with this? Nero "says" the drive is not initializing - perhaps due to a defective disc DISCINFO VERSION : 1.5.5.9 VENDOR : PIONEER MODEL : DVD-RW DVR-109 REVISION : 1.57 VENDOR SPECIFIC : 05/07/05 PIONEER LOADING MECHANISM : Tray SERIAL NUMBER : ECDL366180WL NUMBER VOL. LEVELS : 256 BUFFER SIZE : 2000KB INTERFACE : ATAPI RPC2 SCHEME : YES STATUS : Set USER CHANGES : 4 VENDOR CHANGES : 4 CURRENT REGION : 1 ANALOG AUDIO PLAY : YES COMPOSITE OUTPUT : NO DIGITAL PORT-PORT1 : NO DIGITAL PORT-PORT2 : NO READ UPC CODE : YES MULTISESSION READ : YES MODE 2 FORM 1 : YES MODE 2 FORM 2 : YES READ ISRC CODE : YES READ BAD CODE : NO BUFFER UNDER-RUN : YES MT. RAINIER : NO CAN READ CDR : YES CAN READ CDRW : YES CAN READ CDRM2 : YES CAN WRITE CDR : YES CAN WRITE CDRW : YES CAN TEST WRITE : YES CAN READ DVD-ROM : YES CAN READ DVD-R : YES CAN READ DVD-RW : YES CAN READ DVD-RAM : YES CAN READ DVD+R : YES CAN READ DVD+RW : YES CAN WRITE DVD-R : YES CAN WRITE DVD-RW : YES CAN WRITE DVD-RAM : NO CAN WRITE DVD+R : YES CAN WRITE DVD+RW : YES MAX CDR READ SPEED : 40 MAX CDR WRITE SPEED: 40
are you sure you did the discinfo utility on the correct drive?? do you have a 2nd drive installed on your computer??? a dvd-rom drive perhaps? i have this drive myself, the Pioneer dvr-109, this is VERY weird if you ran a scan on the pioneer and THIS was the results it found~ all i can say, is "wtf" too~ ????
