Hello ppl, Im new to afterdaw as a register user, but I have been using ur infos for a time now and thx to u all they are were very helpfull. But now Im having a problem i couldnt find any like this, some similar, but not the same. I had reinstalled my winxp and reinstalled nero 5. b4 that multisection cds worked without a problem. Now everytime i try to burn a multisection cd comes the same error: Nero Express: Error while reading. Possibility of corrupt disc. This happened with every cd i try to burn (and yes i did use the same nero 5 b4 to burn that same cd). Plz any help would be more then welcome. thx in advance. Doido
since you reinstalled windows I think your drive is having problems and maybe windows didn't install your drive properly! if you did reinstall windows make sure you do all the windows updates for your computer! After updating windows and you still have a problem...... then I would uninstall the drive and reboot and see if windows correctly reinstalls your drive and then try again to burn the CD. Here's how to uninstall your drive: right click on MY COMPUTER/PROPERTIES/HARDWARE/DEVICE MANAGER/ then navigate down to DVD/CD-ROM DRIVES/ and then right click your drive hit UNINSTALL. now reboot! Windows will reinstall your drive. then check to see if this fixes your problem. If this doesn't then let's see a full Nero log and see what's what! Also I would go to Nero 6.6.0.18 which is the best Nero 6 version you can get. I don't know if your serial # will allow you to get the full blown version of Nero 6 since you are using Nero 5 which is wayyyyyyyy old. would love to see a Nero Log. But if you want to venture to Nero 6 here's how: Before udating to 6.6.0.18 I would save the serial #, uninstall Nero, then use the cleaning tools : http://ww2.nero.com/nero6/eng/Clean_Tools.html then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot! install package one: http://www.filehippo.com/download_nero_burning_rom/?539 then install package two: http://www.nero.com/nero6/eng/Patch_for_NVE3.html reboot and you're good to go! good luck.
Thx IHoe, Ill give it a try. As soon as i get the results ill post the answers. X ur fingers for me...hehehe Take care
Hello again, Thats what i did: Got all the updates for winxp. Uninstall nero, cleaned up the registries (reg cleaner, ccleaner and regscrub, just to be sure)and reboot. Check the drivers for the cd-dvd rom(btw, slimtype dvdrw sosw 852s *updated firmware to ps08) all seams fine. Reinstall nero 5 (yeah, I know) reboot. Burned a new cd with multisection, all fine. Next try a burn in the same cd...and the same damn error. All done with nero express. Then I try the normal way, with the nero burning rom. It says i cant add any file to the cd because they are read only. And doenst let me add no other file to the cd. Am I doing something wrong with the configuration of nero? If not then whats wrong? and btw, how do i get a nero log? i would post it in no time... Any suggestion?
here is where the nero Logs are for 6 & 7, but don't know where the logs are for 5! Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.tx
Here goes the Nero log: Sry if its to big. Dont know how to attach files here yet. My Computer Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM Nero Version: 5.5.10.56 (Nero Express) Recorder: <Slimtype DVDRW SOSW-852S>Version: PS08 - HA 1 TA 0 - 5.5.10.56 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Slimtype DVDRW SOSW-852S>Version: PS08 - HA 1 TA 0 - 5.5.10.56 Adapter driver: <atapi> HA 1 Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 495MB (507376kB) Free physical memory: 113MB (116396kB) Memory in use : 77 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On 1.7.2007 CD-ROM (ISO) 10:25:33 PM #1 Text 0 File Isodoc.cpp, Line 7604 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : TRUE Multisession type: : Start multisession Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:25:34 PM #2 Phase 104 File dlgbrnst.cpp, Line 1655 SMART-BURN activated 10:25:34 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 10:25:34 PM #4 Text 0 File Writer.cpp, Line 125 Writer Slimtype DVDRW SOSW-852S running 10:25:34 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 10:25:34 PM #6 Text 0 File Burncd.cpp, Line 3773 Turn on Track-At-Once, using CD-R/RW media 10:25:34 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 351316 (351316) = #351316/78:4.16 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 10:25:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 229 Last possible write address on media: 359848 (79:59.73) Last address to be written: 351315 (78:06.15) 10:25:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 234 Write in overburning mode: FALSE 10:25:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 1703 Recorder: Slimtype DVDRW SOSW-852S; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 10:25:36 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder Slimtype DVDRW SOSW-852S for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 719802368 10:25:36 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852 Removed 2 run-out blocks from end of track 1. 10:25:36 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 351316 (351316) = #351316/78:4.16 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 351314 blocks [Slimtype DVDRW SOSW-852S ] -------------------------------------------------------------- 10:25:36 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 10:25:36 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 10:25:36 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 24x (3,600 KB/s) 10:25:36 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 10:25:36 PM #18 Text 0 File Mmc.cpp, Line 19546 Set BUFE: SMART-BURN -> ON , Generic write control : ON 10:31:10 PM #19 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 10:31:23 PM #20 Text 0 File Mmc.cpp, Line 14537 <SlimtypeDVDRW SOSW-852S > start Close Session 10:31:50 PM #21 Phase 37 File dlgbrnst.cpp, Line 1655 Burn process completed successfully at 24x (3,600 KB/s) 10:31:52 PM #22 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== My Computer Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM Nero Version: 5.5.10.56 (Nero Express) Recorder: <Slimtype DVDRW SOSW-852S>Version: PS08 - HA 1 TA 0 - 5.5.10.56 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Slimtype DVDRW SOSW-852S>Version: PS08 - HA 1 TA 0 - 5.5.10.56 Adapter driver: <atapi> HA 1 Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 495MB (507376kB) Free physical memory: 179MB (183440kB) Memory in use : 63 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On 1.7.2007 CD-ROM (ISO) 10:33:37 PM #1 Text 0 File Isodoc.cpp, Line 7604 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:33:37 PM #2 Phase 104 File dlgbrnst.cpp, Line 1655 SMART-BURN activated 10:33:37 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 10:33:37 PM #4 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 10:33:38 PM #5 Text 0 File Burncd.cpp, Line 3773 Turn on Track-At-Once, using CD-R/RW media 10:33:38 PM #6 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 360649 (360649) = #360649/80:8.49 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 10:33:47 PM #7 Phase 40 File dlgbrnst.cpp, Line 1655 Aborted by user 10:33:47 PM #8 Text 0 File DlgWaitCD.cpp, Line 229 Last possible write address on media: 359848 (79:59.73) Last address to be written: 360799 (80:12.49) 10:33:47 PM #9 Text 0 File DlgWaitCD.cpp, Line 234 Write in overburning mode: FALSE 10:33:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 1703 Recorder: Slimtype DVDRW SOSW-852S; CD type reading failed ATIP Data: ? 10:33:47 PM #11 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ====== My Computer Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 1/29/2003 10:37:36 PM Nero Version: 5.5.10.56 (Nero Express) Recorder: <Slimtype DVDRW SOSW-852S>Version: PS08 - HA 1 TA 0 - 5.5.10.56 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Slimtype DVDRW SOSW-852S>Version: PS08 - HA 1 TA 0 - 5.5.10.56 Adapter driver: <atapi> HA 1 Bus Type : default (0) -> ATAPI, detected: ATAPI === Scsi-Device-Map === DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : Slimtype DVDRW SOSW-852S atapi Port 1 ID 0 DMA: On ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 495MB (507376kB) Free physical memory: 107MB (110128kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Enabled (1) Wizard: On 1.7.2007 CD-ROM (ISO) 10:35:30 PM #1 Text 0 File Isodoc.cpp, Line 7604 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 10:35:30 PM #2 Phase 104 File dlgbrnst.cpp, Line 1655 SMART-BURN activated 10:35:30 PM #3 Text 0 File Reader.cpp, Line 115 Reader running 10:35:30 PM #4 Text 0 File Writer.cpp, Line 125 Writer Slimtype DVDRW SOSW-852S running 10:35:30 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4571 First writeable address = 0 (0x00000000) 10:35:30 PM #6 Text 0 File Burncd.cpp, Line 3773 Turn on Track-At-Once, using CD-R/RW media 10:35:30 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (original item values) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 353083 (353083) = #353083/78:27.58 relocatable, CD pos for caching/writing not required/required, no patch infos -------------------------------------------------------------- 10:35:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 229 Last possible write address on media: 359848 (79:59.73) Last address to be written: 353082 (78:29.57) 10:35:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 234 Write in overburning mode: FALSE 10:35:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 1703 Recorder: Slimtype DVDRW SOSW-852S; CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd. ATIP Data: Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74) Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid) 10:35:30 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 824 Prepare recorder Slimtype DVDRW SOSW-852S for write in TAO DAO infos: ========== MCN: TOCTYPE: 0x0 Session Closed, CD fixated Tracks 1 to 1: TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 723421184 10:35:30 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 852 Removed 2 run-out blocks from end of track 1. 10:35:30 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 672 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (CTransferItem) 2 indices, index0 (150) not provided original CD pos #0 + 353083 (353083) = #353083/78:27.58 relocatable, CD pos for caching/writing not required/required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 353081 blocks [Slimtype DVDRW SOSW-852S ] -------------------------------------------------------------- 10:35:30 PM #14 Phase 24 File dlgbrnst.cpp, Line 1655 Caching of files started 10:35:30 PM #15 Phase 25 File dlgbrnst.cpp, Line 1655 Caching of files completed 10:35:30 PM #16 Phase 36 File dlgbrnst.cpp, Line 1655 Burn process started at 24x (3,600 KB/s) 10:35:30 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978 Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0 10:35:30 PM #18 Text 0 File Mmc.cpp, Line 19546 Set BUFE: SMART-BURN -> ON , Generic write control : ON 10:40:57 PM #19 Text 0 File ThreadedTransfer.cpp, Line 222 all writers idle, stopping conversion 10:41:07 PM #20 Text 0 File Mmc.cpp, Line 14537 <SlimtypeDVDRW SOSW-852S > start Close Session 10:41:34 PM #21 Phase 37 File dlgbrnst.cpp, Line 1655 Burn process completed successfully at 24x (3,600 KB/s) 10:41:35 PM #22 Text 0 File Scsicmd.cpp, Line 406 SCSI not using temporary buffers 20 out of 20 temporary buffers allocated Existing drivers: File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 7:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) ====== *** Nero-Burning Rom, History File *** ======
Ihoe, nevermind the log. I just install nero 6 and worked perfectly! Thx a lot! So its certain to say the problem was with Nero 5 not reading the cds when inserted and then prompting the error message. Lets hope this will not happened with nNero 6. Again, thx for ur help. take care, Doido
