Eurovox max v 2008 black firmware help

Hi All, hope someone can help, i have a eurovox max v 2008 black box, just recently i keep getting the error message PEAA on led screen, what firmware would help to fix it, if anyone can help it would be much appreciated, my system info is:

Model: DVB-XC BoxV TDA
S/W Ver: 1.0 ST4 Apr10 2008
H/W Ver: 2.0t K5
Bootstrap: v001
S/W Build: Kuro

thanx shaun

 

your box must be a clone thats why you are getting that message you will need to look for clone safe for that black box

 

thanx e45, do you know which clone firmware i will need for black clone box.

thanx

 

sorry for the confusion, my s/w ver - 1.0 ST4 Apr 18 2008, i dont know if it helps at all.

thanx

 

You can try this firmware below but if your box is a clone it might kill it so it will be at your own risk.

There was no clone safe made for the Black box sorry



BLACK FIRMWARE HERE

 

thanx e45 for your help, will try it tomoz.

thanx

 

Hi e45, just a quick question, if i get another box the same as mine and do a box to box transfer will it erase all other firmware on my box an replace it with the other boxes data?

thanx shaun

 

if you have the latest firmware on yours and the other box has older firmware, your fimrware will be overwritten by the older and vice versa.

 

Hi MICKAH, my box has error message PEAA which i am trying to fix, so if i flash it hopefully it will fix my fault?

thanx shaun

 

sounds like ya have a clone box, the Peaaa is a protection message on the box, which has been flashed with the wrong firmware, as e45 says no clone safe firmware for this box,

 

Hi MICKAH, I have checked all pics to see if i have the clone or not, but everything i have checked shows me its an original eurovox max v, so was hoping if box to box transfer would fix it, if you know of a way round it, it would be much helpfull.

thanx shaun

 

try flashing it with an earlier firmware to get rid of the PEAAA error, if this works, try the link that e45 gave ya and flash the box with this, using box to box does work, but flashing with a null modem cable is better in this instance,

 

thanx MICKAH, i will try it l8tr, got 2 get kids from school, will let u know how i get on.

thanx again shaun

 

Hi MICKAH, Just a quick question, i am just about to do a box to box transfer, but i am confused with the instructions, it says to connect one box to tv and put one on standby, i just need to know which box the data is being transfered from, is the one i connect to the tv or is it the one i put on standby, just so that i dont put the fualty box data on the good box, if you can help it would be much appreciated.

thanx shaun

 

what ever one you have the software on is connected to the Tv the one receiving the software is the one to put on standby.


Also do not touch it during the flashing period until after the box receiving the software re boots by itself

 

thenx e45 for you help.

 

not a prob anytime !!

 

Thanx e45 and mickah for all your help, my box is up and running at last, thank you very much.

thanx shaun