hi all any help my box above is blinking on saying no signal then goes back to whatever you are watching for 1 to 2 minutes very annoying cannot watch anything properly.HELP
had this problem myself,its your tv cable from your wall to your max,if that doesnt fix it you have a loose connection somewhere,nothing to do with box or firmware.
thanks the game8 but it is not my problem i have tried my other maxv and i have no problem with that i have tried all connections as well.
try re installing the firmware,check firmware on max that works and max that doesnt maybe there different.
tryed that also but still saying no signal one of my boxes is perfect cant understand this from same cable must be something eles inside the box.thanks again the game8.
Not much help I'm afraid celtic7, but when it say's "No Signal" it does mean exactly that, and seeing that your other EV is fine on the same feed, then it looks like a faulty tuner, and it's on the way out.
thanks malci for the info but hopefully not there is a lot of football to be seen yet dont want to be watching corrie with the wife.
Have you tried it with the Signal Booster option ON in TV Settings, and what is the signal level, is it fluctuating or what, steady around the 80 - 81% mark is about right, but try the Signal Booster and see if it makes any difference.
I had the same problem with my eurovox. I fixed mine by altering the frequency of any affected channels. To do this you need to find out what frequency the bad channel is on, press info twice and it will be displayed on the top of the screen. Now go into Menu, Installation, User Installation (enter pin). Now scroll down to the affected frequency e.g. 178.000 and press the green button (ch. edit), press the blue button (modify), scroll down to the frequency and change 178.000 to 178.250. Press ok to save changes. Press exit. Now, with the same frequency highlighted, press ok and then press the blue button (manual scan). This will rescan on the new frequency and should bring your channels back with good signal quality. If it doesn't work first time try changing the frequency to e.g 177.750. you can tell if the signal is good by watching the green bar while in User Installation, a constant bar without fluctuations should mean no break up of the channel. Good Luck, Red 72.
thanks for the info red72 i will try that but all the channels are the same it just comes up on screen no signal every so often minute or so.
hi red72 it is not the frequency tryed it it is the same as my other box when i done a scan the same frequency came back all channels are the same no signal is flashing and tv just freezes.THANKS ANYONE Eles can help i am in cork.
If your other box is working fine then I guess this rules out a problem with the cable and signal, As Malci says it could be a problem with the tuner.
That level is more than enough 84% is a bit high actually!! - But to try the Signal Booster option, press menu and go across to TV Settings OK and it is there at the bottom <> arrow key to turn On or Off - but it seems as though the tuner is faulty to me. Have you tried a Factory Default and fresh Powerscan, won't do any harm to give it a go.
hi malci tryed the powerscan still no joy must be something eles thanks anyway. anymore suggestions thanks lads.
hi i have a small black eurovox and all my sky channals are gone any help please all off the other channals are fine cheers.
still the same done a powerscan and checked all cabels and frequency still no joy anyone eles with any other suggestions THANKS.
