My desktop pc connects to the internet wirelessly thru my wireless router. What I am wondering is when my girlfriend connects to the net at my place on her laptop, how can she access the files on my computer? Thanks for your help
right ok to start to shere the folder u need to right click the folder u want to share then click properties then click the sharing tab then check share this folder on my network to get to the file u have shared go my computer on the left my network places and the folder should be there let me no if this helps
Set up Remote desktop on yer missus notebook, that way she can have access to everything. START - ALL PROGRAMS - ACCESSORIES - COMMUNICATION - REMOTE DESKTOP. Have a go and post back if you need any help matey. I run XP pro and I believe the home version is different, so any probs, post back
You can share an entire drive just as easily as a folder; just right-click your hard drive(s) in My Computer and select the Sharing tab. Windows will give you a warning about the risks associated with sharing an entire drive but it will let you. There also historically have been directory-traversal vulnerabilities that allow an attacker to access the entire drive even if only a sub-folder is shared, and I believe some still exist. Also understand that when you're sharing wireless, your PCs are essentially unfirewalled to each other on the network, so if you aren't running forced encryption (encryption is required to connect) and using a PSK (pre-shared key), an attacker can access your files (or run attacks against your PCs) as easily as if your PCs were physically wired together, since they are all on the same network and are inside the router's firewall.
When sharing files on your home network you will also have to configure your Software firewall to allow access. The comment above does not make much sense to me at all. When you share files then you will have to configure your software firewall, to allow connections from the other pc's IP. Also if your wireless access point/router can be configured to accept only the mac addresses you want then you can secure your connection even more. Although mac cloning is possible, I strongly recommend entering the mac address of each pc, and you can limit the amount of DHCP this is a proccess that gives the IP addresses to your pc's
The problem is that by placing your LAN in a "trusted zone" (or whatever your firewall calls it), you essentially disable the firewall for that network range. In order for NBT (or any IP traffic for that matter) traffic to make it through a PC firewall, turn off stateful inspection of the LAN IPs that will be sending it; thus, you are essentially unfirewalled. BTW, MAC spoofing is very easy to do, so MAC registries are of very limited value. Software like SMAC has long been available to do this.