flashing excuter ce

whats the easiest way to flash my excuter ce ive sucessfully installed the chip but when i try to connect via ftp it says can not connect.. what should i do?

 

you need to download the new bios, write it to cd then put it in the xbox to flash. pm me if you want and i'll send over the bios you need

 

ok that will work, and what did u do to your slim ps2 does it work pretty good?

 

To start the flash I used Internet Explorer. Type in you xbox ip addy where you would type a web page. Select flash using internet or somethin like that. Once it loads the yellow bar and green bar. The box will turn off. When you turn it back on switch to bank 2 and well i dont know after that... lol thats where im stuck at now.. When you start, on the flashscreen it should say Flash Bios 1.0.1 i think but once you flash it on back 1, switch to bank 2. It should say Flash Bios 3.0.3

 

when i select to flash with internet or what ever, network, it says something about tcp and then it doesnt nothing for a while then it says unable to fall back on 192 ect

 

do you have any bios if you dont have any i can email some to you & tell you how to burn it to a disc!

 

just the flash bios that came with the chip, but yeah you can email me some that will be cool

 

send me a PM with your email address!!!

 

when FlashBIOS boots the easiest is to select 'flash via HTTP'

it should then configure and give you the IP address if you have the network cable connected correctly, then use your PC browser with that IP as the URL, you'll get the flash screen and depending on the size of the flash you choose (it should be a 1 meg with x3294 if you're chip is the X3ce) it'll write it to bank 1+2+3+4 irregardless of what you have the bank select switches set to (you need write protection disabled when flashing) at that point you need to have the bank select set to 1+2+3+4 (on on off off)to boot that flash.

also you need to use the correct version of the flash for the version box you have, v16plus is for 1.6 and later boxes.

kc

 

ok so when i i select flash via http, it doesnt connect then? ok i think min says flash via network? but when i select it, a few lines of words come up then a few mins later it a few more come up and then a ip comes up, is that the ip i need, im not at home or i could give you more details

 

the best way to do this is with a dvd disc if you want me to tell you how send me a PM.

 

when you click A on 'Enable Network Flashing' you should then get a screen that says:

|nforce|nforce MAC Address 00:XX XX XX (x's replaced with your box's MAC Address)
100-Mbs Link, Full-Duplex
TCP/IP initialized.
DHCP IP:192.168.0.xxx/255.255.255.0 (again xxx is dependent on your network)


the 192.168.0.xxx is the URL you'll use in your browser.

@xbox-man i see your constant advertising/spamming for mod services has landed you with a permanent banning

kc

 

when i get home ill tell ya what it says, but i do remember it saying that, but then it says something else i cant remember

 

just snapped a few quickie shots of the two screens:



i'll grab some screen captures of the rest of the process and post them shortly.

kc

EDIT: from the above screen you enter that IP address in your browser and get this:
RED text is explanations. (make sure you have write protection turned off)



after hitting Upload and Flash you'll get this screen:



at this point the only visualizations you'll have are from the TV screen and waiting for the XBOX to turn off, when it turns off you can close the browser and your chip is now flashed. when you turn the box back on with the 1+2+3+4 bank selected you should now get the Xecuter Rox My Box logo.

 

yeah says all that except the part about the ip, i think it says failed or something ill let ya know

 

failed usually indicates you've either used a patch cable rather then a cross for a direct connection between box and PC or your router isn't configured correctly (LAN DHCP Server Enabled).

kc

 

flash the bios from a dvd disc here is the link for the tut http://www.i'manidiot.com/tutorials/FlashBIOS v3.03 Tutorial_files/dvd.htm edited by ddp copy & paste.

 

well well if it aint old hacksaw/xbox-man/etc... back to spam the boards again.

kc

 

Ahh the wonderful ddp a man who never tires of cleaning out the trash.

have a great day
kc