Ftp Problems

Discussion in 'Xbox - General discussion' started by damickman, Jul 25, 2003.

  1. damickman

    damickman Member

    Joined:
    Jul 25, 2003
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    Hi, I have installed evox 1.8.3745 or whatever the latest version is and i cant connect to my xbox i have a dial up modem and crossover cable and 1 nic i have started evox when i try and i have set the static i.p to yes. I have alos chnaged the i.p name of my nic to 192.168.0.1 is there any way to fix this it keeps asking to connect to the internet when i am not on the internet and when i am it says connection timed out. I cant even ping my xbox is there some other settings that have to be added?
     
    damickman, Jul 25, 2003
    #1
  2. seamonkey

    seamonkey Regular member

    Joined:
    Nov 3, 2002
    Messages:
    448
    Likes Received:
    0
    Trophy Points:
    26
    first of all.

    when you go into your evolution x settings (via the menu) does it show that your network is setup or present and the current ip of the xbox?

    also, are you using an ftp client such as flashFXP?

    what Operating system are you using on your pc?

    make sure to have Setup Network = YES, FTP = YES, STATIC IP=YES, then define an ip such as 192.168.0.4 (just so your pc and your xbox do NOT have the same ip), then try to ping the xbox's ip. if it comes back with timed out, your xbox is not connected to your pc..

    to ping:
    go to Start Menu > Run
    then type command and hit enter (it will bring up a command prompt)
    at the command prompt type: ping 192.168.0.4

    hope that gives ya place to start..
    peace
    seamonkey420
     
    seamonkey, Jul 25, 2003
    #2
  3. damickman

    damickman Member

    Joined:
    Jul 25, 2003
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    I am using windows 98 and i hae done all those things you said and still when i try to ping it when i am not connected to the internet i get cannot reach and when i am it just times out. I think it has something to do with my nic. If you have any more info please tell me.
     
    damickman, Jul 25, 2003
    #3
  4. bj_oz

    bj_oz Member

    Joined:
    Jul 28, 2003
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    11
    So you have installed your mod chip, you have downloaded evox and your about to run xISO to create an evox boot disk. STOP!!!!.
    Make sure you do the following first:
    1. Open evox.ini in notepad
    2. Ensure that “StaticIP = Yes”
    3. If it is No then change it to Yes.

    Now create your xISO image and create your boot disk on DVD or CDRW

    Why ? you say. Changes to the network settings only take effect when you re-boot the xbox. If you try to change these setting from the evox dashboard they will not take effect until the xbox is re-booted. And as you are running the dashboard from a read only medium any setting you change will be lost on re-boot.
     
    bj_oz, Jul 28, 2003
    #4
  5. damickman

    damickman Member

    Joined:
    Jul 25, 2003
    Messages:
    3
    Likes Received:
    0
    Trophy Points:
    11
    It is o.k now i fixed it up all i had to do was upgrade to win xp
    then it did all the rest i guess windows 98 doesnt support realtek 8139.
    Thanx for you help anyway
     
    damickman, Jul 29, 2003
    #5

Share This Page