Using nero, Here are the errors I get in the order they happen. All within 15 seconds of starting the burn- 1. Focus or tracking error 2. Session fixation error 3. Could not perform end of disc-at-once Anyone know why these errors might be occurring? Any help would be greatly appreciated. Thanks in advance.
please copy and paste your whole nero log so we can see exactly what's wrong......remember to take out the serial #s when posting!
ok, heres my latest failure log. Got the same 3 errors... 4C82- Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 Recorder: <PLEXTOR DVDR PX-716A> Version: 1.10 - HA 1 TA 1 - 7.8.5.0 Adapter driver: <USB 2.0> HA 1 Drive buffer : 8192kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-ROM SH-152A >Version: C505 - HA 1 TA 0 - 7.8.5.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00GVC0 atapi Port 0 ID 0 DMA: On DiskPeripheral : SAMSUNG SP1604N atapi Port 0 ID 1 DMA: On CdRomPeripheral : SAMSUNG CD-ROM SH-152A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SAMSUNG CD-ROM SH-152A D: CDRom0 PLEXTOR DVDR PX-716A G: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096364kB) Free physical memory: 1199MB (1228628kB) Memory in use : 41 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.9.2007 Burn DVD Image 10:03:47 AM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 10:03:47 AM #2 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 10:03:47 AM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2235833 (496:51.08, 4366MB) 10:03:47 AM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 10:03:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 10:03:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 10:03:47 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2235834 (2235834) = #2235834/496:51.9 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2235834 blocks [G: PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 10:03:47 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [G: PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4578988032, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2235834 | 2235834 | 0x00 2235834 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 10:03:47 AM #9 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 10:03:47 AM #10 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 10:03:47 AM #11 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 10:03:47 AM #12 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 10:03:47 AM #13 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 10:03:47 AM #14 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 16x (22,160 KB/s) 10:03:47 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 10:03:47 AM #16 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 10:03:47 AM #17 Text 0 File DVDR.cpp, Line 6727 Drive: PLEXTOR DVDR PX-716A Book Type request [PX]: DVD-ROM Changing the Book Type was finished successfully, return code 0 10:03:47 AM #18 CDR -1207 File DVDR.cpp, Line 6356 Book Type automatically set to: DVD-ROM 10:03:47 AM #19 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 10:03:47 AM #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 10:03:48 AM #21 Text 0 File Cdrdrv.cpp, Line 1338 10:03:48.937 - G: PLEXTOR DVDR PX-716A : Queue again later 10:04:12 AM #22 SPTI -1039 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x09 Sense Qual: 0x01 CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00 Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 09 01 Buffer x06c80080: Len x10000 0x01 00 02 00 CC 00 01 00 C9 EE F0 01 20 00 00 00 0x00 00 00 00 00 00 00 00 08 53 4E 41 54 43 48 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10:04:12 AM #23 CDR -1039 File Writer.cpp, Line 303 Focus or tracking error G: PLEXTOR DVDR PX-716A 10:04:12 AM #24 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 10:04:12 AM #25 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 10:04:12 AM #26 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 32 10:04:13 AM #27 Text 0 File DVDR.cpp, Line 6727 Drive: PLEXTOR DVDR PX-716A Book Type request [PX]: DVD+R Changing the Book Type was finished successfully, return code 0 10:04:13 AM #28 CDR -1176 File WriterStatus.cpp, Line 162 Session fixation error G: PLEXTOR DVDR PX-716A 10:04:13 AM #29 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 10:04:13 AM #30 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 16x (22,160 KB/s) 10:04:13 AM #31 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:04:17 AM #32 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 10:04:17 AM #33 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
There is a firmware update for you drive...1.11 from here. Not the best media, if the firmware update doesn't fix the problem I'd try some Verbatim or Taiyo Yuden. You are trying to burn too fast...I'd suggest 8X-12X and no more.
Tried all the above mentioned suggestions. I'm hoping its not just bad dvd's as I bought 200 of these bastards. How can they sell dvd's that won't burn properly? What are they for if not for movies and stuff? Here is the new fail log- 4C82 Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.8.5.0 Internal Version: 7, 8, 5, 0 Recorder: <PLEXTOR DVDR PX-716A> Version: 1.11 - HA 1 TA 3 - 7.8.5.0 Adapter driver: <USB 2.0> HA 1 Drive buffer : 8192kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <SAMSUNG CD-ROM SH-152A >Version: C505 - HA 1 TA 0 - 7.8.5.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : WDC WD1200JB-00GVC0 atapi Port 0 ID 0 DMA: On DiskPeripheral : SAMSUNG SP1604N atapi Port 0 ID 1 DMA: On CdRomPeripheral : SAMSUNG CD-ROM SH-152A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === SAMSUNG CD-ROM SH-152A D: CDRom0 PLEXTOR DVDR PX-716A G: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 2047MB (2096364kB) Free physical memory: 1590MB (1628908kB) Memory in use : 22 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.9.2007 Burn DVD Image 1:30:11 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 1:30:11 PM #2 Text 0 File Burncd.cpp, Line 3499 Turn on Disc-At-Once, using DVD media 1:30:12 PM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2235833 (496:51.08, 4366MB) 1:30:12 PM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 1:30:12 PM #5 Text 0 File DlgWaitCD.cpp, Line 2949 Recorder: PLEXTOR DVDR PX-716A, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 1:30:12 PM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 1:30:12 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2235834 (2235834) = #2235834/496:51.9 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2235834 blocks [G: PLEXTOR DVDR PX-716A] -------------------------------------------------------------- 1:30:12 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [G: PLEXTOR DVDR PX-716A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4578988032, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 2235834 | 2235834 | 0x00 2235834 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 1:30:12 PM #9 Text 0 File SCSIPTICommands.cpp, Line 209 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 1:30:12 PM #10 Text 0 File Burncd.cpp, Line 4278 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 1:30:12 PM #11 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 1:30:12 PM #12 Text 0 File Burncd.cpp, Line 4397 Cache writing successful. 1:30:12 PM #13 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 1:30:12 PM #14 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 6x (8,310 KB/s) 1:30:12 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 1:30:12 PM #16 Text 0 File Cdrdrv.cpp, Line 9859 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 258 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: CMC.MAG. Media type ID: E01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8 23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 1:30:12 PM #17 Text 0 File DVDR.cpp, Line 6727 Drive: PLEXTOR DVDR PX-716A Book Type request [PX]: DVD-ROM Changing the Book Type was finished successfully, return code 0 1:30:12 PM #18 CDR -1207 File DVDR.cpp, Line 6356 Book Type automatically set to: DVD-ROM 1:30:12 PM #19 Text 0 File DVDPlusRW.cpp, Line 674 Start write address at LBA 0 DVD high compatibility mode: Yes 1:30:12 PM #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 1:30:13 PM #21 Text 0 File Cdrdrv.cpp, Line 1338 13:30:13.468 - G: PLEXTOR DVDR PX-716A : Queue again later 1:30:49 PM #22 SPTI -1106 File SCSIPassThrough.cpp, Line 179 CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1106) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03 Buffer x06c80080: Len x10000 0x01 00 02 00 CC 00 01 00 C9 EE F0 01 20 00 00 00 0x00 00 00 00 00 00 00 00 08 53 4E 41 54 43 48 00 0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1:30:49 PM #23 CDR -1106 File Writer.cpp, Line 303 Power calibration error G: PLEXTOR DVDR PX-716A 1:30:51 PM #24 SPTI -1176 File SCSIPassThrough.cpp, Line 179 CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1176) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x72 Sense Qual: 0x04 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 04 1:30:51 PM #25 Phase 127 File dlgbrnst.cpp, Line 1762 Generating DVD high compatibility borders 1:30:51 PM #26 Text 0 File DVDPlusRW.cpp, Line 934 EndDAO: Last written address 32 1:30:52 PM #27 Text 0 File DVDR.cpp, Line 6727 Drive: PLEXTOR DVDR PX-716A Book Type request [PX]: DVD+R Changing the Book Type was finished successfully, return code 0 1:30:52 PM #28 CDR -1176 File WriterStatus.cpp, Line 162 Session fixation error G: PLEXTOR DVDR PX-716A 1:30:52 PM #29 TRANSFER -24 File WriterStatus.cpp, Line 162 Could not perform end of Disc-at-once 1:30:53 PM #30 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 6x (8,310 KB/s) 1:30:53 PM #31 Text 0 File SCSIPTICommands.cpp, Line 254 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 1:30:55 PM #32 Text 0 File Cdrdrv.cpp, Line 11214 DriveLocker: UnLockVolume completed 1:30:55 PM #33 Text 0 File SCSIPTICommands.cpp, Line 411 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Thanks again for taking a look at this
LOCOENG is correct when advising you on those CMC MAGs disks. I'm sorry you bought so many of them. It's not that the stores are selling you bad disk but it's the compatibility issue. The disks by themselves might be good quality but for the burners to recognized these disks there are problems! If you go to the MEDIA FORUM and ask about CMC MAGs you will get many people telling how bad they are because most burners have problems with those disks. Go out and buy some Verbatim disks! They are more readily compatible with most burner! Now your Power Calibration Error is also important. Read this: <9>I have a Power calibration error? Options you can try with "power calibration errors" o Try another brand of DVD-/+R or DVD-/+RW media. This is the most common cause of OPC errors. o "Slow down your burning speed". o Update the firmware of your recorder. Check the manufacturer's website for the latest version. o Check your power connectors, loose connections do occur. Don't share power with other devices. It needs its own power connector. If the errors occurs with an external recorder, Check the USB cable and connections. o Try different configurations, such as taking the DVD-ROM to the primary IDE bus as slave and have only the recorder connected to the secondary IDE bus as master. o Clean or have your DVD burner serviced. There are cleaning kits available. Sometimes just a gentle appplication of canned air can remove dust blocking the laser. o Replace the DVD burner. lets hope we don't need to do the last one that was found here: http://forums.afterdawn.com/thread_view.cfm/183136 so the easiest way to check and see if you still have a Power Calibration Error is to change your media! do yourself a favor and buy Verbatim or go online and get the best media you can get: Taiyo Yuden (made in Japan disks)...... found at: supermediastore.come Meritline.com Rima.com and other reputable online stores.
