Have .ccd and .sub files of game...

Discussion in 'CD-R' started by Horaesin, Oct 19, 2004.

  1. Horaesin

    Horaesin Member

    Joined:
    Oct 19, 2004
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    11
    The .ccd files are only 2k large, and the .sub files are what I would expect the game img file to be (size wise) yet when I try to mount it to the cd, it does nothing (I'm using A 120%) and the .ccd file comes up with "unable to access image file"

    Help? ^_^;
     
    Horaesin, Oct 19, 2004
    #1
  2. aldaco12

    aldaco12 Active member

    Joined:
    Nov 6, 2002
    Messages:
    2,544
    Likes Received:
    0
    Trophy Points:
    66
    Well, it seem a priblem like on a .CUE you have FILE "C:\directory\image.bin" BINARY instead of simply
    FILE "image.bin" BINARY (which forces the application to load the .BIN from the same directory of the .CUE file).
    If the .CCD were an ASCII file you should simply open it with Notepad and edit it. If not like the Alcohol 120% MDS file, you're lost.

    The problem is that a .CCD file is like:

    [CloneCD]
    Version=3

    [Disc]
    TocEntries=6
    Sessions=1
    DataTracksScrambled=0
    CDTextLength=0

    [Session 1]
    PreGapMode=1
    PreGapSubC=0

    [Entry 0]
    Session=1
    Point=0xa0
    ADR=0x01
    Control=0x06
    TrackNo=0
    AMin=0
    ASec=0
    AFrame=0
    ALBA=-150
    Zero=0
    PMin=1
    PSec=0
    PFrame=0
    PLBA=4350

    [Entry 1]
    Session=1
    Point=0xa1
    ADR=0x01
    Control=0x06
    TrackNo=0
    AMin=0
    ASec=0
    AFrame=0
    ALBA=-150
    Zero=0
    PMin=1
    PSec=0
    PFrame=0
    PLBA=4350

    [Entry 2]
    Session=1
    Point=0xa2
    ADR=0x01
    Control=0x06
    TrackNo=0
    AMin=0
    ASec=0
    AFrame=0
    ALBA=-150
    Zero=0
    PMin=1
    PSec=0
    PFrame=30
    PLBA=4380

    [Entry 3]
    Session=1
    Point=0x01
    ADR=0x01
    Control=0x04
    TrackNo=0
    AMin=0
    ASec=0
    AFrame=0
    ALBA=-150
    Zero=0
    PMin=0
    PSec=2
    PFrame=0
    PLBA=0

    [Entry 4]
    Session=1
    Point=0xb0
    ADR=0x05
    Control=0x06
    TrackNo=0
    AMin=3
    ASec=30
    AFrame=30
    ALBA=15630
    Zero=2
    PMin=79
    PSec=59
    PFrame=74
    PLBA=359849

    [Entry 5]
    Session=1
    Point=0xc0
    ADR=0x05
    Control=0x06
    TrackNo=0
    AMin=160
    ASec=0
    AFrame=64
    ALBA=269914
    Zero=0
    PMin=97
    PSec=17
    PFrame=6
    PLBA=-12369

    [TRACK 1]
    MODE=1
    INDEX 1=0

    and I don't know whete the .SUB file and the .IMG file is located.
    But when you open the .CCD with Alcohol, this message should appear:

    Type: CloneCD Image file
    Path: C:\directory\
    Name: Image.ccd
    Image.sub
    Size: 0.40 MB
    Session: 1
    Track: 1


    Session 01:
    Track 01: Mode 1, Length: 004380(8.6 MB), Address: 000000

    In this case, you just should make the directory C:\directory\ and put the .SUB and the .IMG 'Image' files there.
     
    aldaco12, Oct 20, 2004
    #2

Share This Page