Hi y'all, I've got a serious problem here. My Samsung writemaster (external) does not seem to copy DVD files any longer, ever since a couple of months ago. Funny thing is my burner does play DVDs normally, music (it even burns it), whatever, but it fails when it comes to DVD burning. I don’t know what could have happened but I think I already tried it all: changing blank DVDs brand, updating software (nero + shrink + DVD Region Free+CSS), updating firmware (funny, sometimes while doing this it says the firmware does not correspond to the device, sometimes it says the firmware is the latest version though), burning at a lower speed, trying another burning software (1copyDVDpro), BUT NOTHING, it just won’t go. The problem comes up when I put a blank DVD into the burner, and this is preparing to start burning. This happens no matter whether I previously compressed the files (with the DVDShrink) or just plainly go to for an exact copy of the original DVD. So, to wrap up, it reads, plays, writes (to hard drive), allows compression, but DOES NOT BURN. I have the two last readouts I got from Nero after the burnings failed. I could email them on request so any of you guys can disentangle them as to get some clue as where to look. I’m just beginning to think that it might be a hardware/firmware thing. Thanx in advance for your time, Pablo
Below, both logs ***serial removed*** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\UTILITIES\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 25/09/2005 19:11:20 NT-SPTI used Nero API version: 7.0.0.0 Using interface version: 6.3.1.4 Installed in: C:\UTILITIES\Core\ Application: ahead\Nero - Burning Rom Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB05 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: === Scsi-Device-Map === DiskPeripheral : ST910021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R6112 D: CDRom0 TSSTcorp CD/DVDW SH-S182M E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 494MB (506672kB) Free physical memory: 134MB (138028kB) Memory in use : 72 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.10.2007 NeroAPI 12:53:30 #1 Phase 112 File APIProgress.cpp, Line 278 DVD-Video files reallocation started 12:53:30 #2 Phase 114 File APIProgress.cpp, Line 278 DVD-Video files reallocation completed (no file modified) 12:53:30 #3 Phase 111 File APIProgress.cpp, Line 278 DVD-Video files sorted 12:53:30 #4 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 12:53:30 #5 Text 0 File Reader.cpp, Line 124 Reader running 12:53:30 #6 Text 0 File AudioCompilationImpl.cpp, Line 842 DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1) DRM: Beginning burn process. 12:53:30 #7 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 12:53:31 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 12:53:31 #9 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 12:55:33 #10 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2286111 (508:01.36, 4465MB) 12:55:33 #11 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO 12:55:33 #12 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD-R Disc Manufacturer: MBI 01 - RG40 Disc Application Code: 64, Disc Physical Code: 193 12:55:33 #13 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD-R DL; DVD+R DL.) 12:55:33 #14 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [E: TSSTcorp CD/DVDW SH-S182M] -------------------------------------------------------------- 12:55:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [E: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 12:55:33 #16 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 12:55:34 #17 Phase 24 File APIProgress.cpp, Line 278 Caching of files started 12:55:34 #18 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 12:55:34 #19 Phase 25 File APIProgress.cpp, Line 278 Caching of files completed 12:55:34 #20 Phase 36 File APIProgress.cpp, Line 278 Burn process started at 16x (22.160 KB/s) 12:55:34 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 12:55:34 #22 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode 12:55:34 #23 Text 0 File MMC.cpp, Line 21541 Set BUFE: Super Link -> ON 12:55:34 #24 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 12:55:34 #25 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 12:55:52 #26 TRANSFER -25 File Reader.cpp, Line 364 Error reading data 12:55:52 #27 Text 0 File Reader.cpp, Line 367 Exception value: -1 12:55:52 #28 Text 0 File ThreadedTransfer.cpp, Line 234 conversion failed, stopping writers 12:55:52 #29 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was -1 12:55:52 #30 Phase 38 File APIProgress.cpp, Line 278 Burn process failed at 16x (22.160 KB/s) 12:55:52 #31 Text 0 File AudioCompilationImpl.cpp, Line 867 DRM: DRM burn session terminated. 12:55:52 #32 Text 0 File AudioCompilationImpl.cpp, Line 896 DRM: Closing entire DRM handling. Bye. Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 27/07/2006 19:28:33 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
And the other one... ***serial removed*** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\UTILITIES\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 25/09/2005 19:11:20 NT-SPTI used Nero Version: 7.0.0.0 Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB05 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: CD-ROM: <TOSHIBA DVD-ROM SD-R6112>Version: 1332 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST910021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R6112 D: CDRom0 TSSTcorp CD/DVDW SH-S182M E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 494MB (506672kB) Free physical memory: 102MB (104668kB) Memory in use : 79 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.10.2007 UDF/ISO compilation 13:07:38 #1 Phase 112 File dlgbrnst.cpp, Line 1724 DVD-Video files reallocation started 13:07:38 #2 Phase 114 File dlgbrnst.cpp, Line 1724 DVD-Video files reallocation completed (no file modified) 13:07:38 #3 Text 0 File Isodoc.cpp, Line 6410 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 13:07:38 #4 Phase 111 File dlgbrnst.cpp, Line 1724 DVD-Video files sorted 13:07:38 #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 13:07:38 #6 Text 0 File Reader.cpp, Line 124 Reader running 13:07:38 #7 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 13:07:38 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 13:07:38 #9 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 13:07:39 #10 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286111 (508:01.36, 4465MB) 13:07:39 #11 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 13:07:39 #12 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 13:07:39 #13 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 13:07:39 #14 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [E: TSSTcorp CD/DVDW SH-S182M] -------------------------------------------------------------- 13:07:39 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [E: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286112 | lead-out | 1 | 0x41 | 0x00 13:07:39 #16 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 13:07:39 #17 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 13:07:39 #18 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 13:07:39 #19 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 13:07:39 #20 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 8x (11.080 KB/s) 13:07:39 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 306 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x05029200: Len x4000 13:07:39 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 13:07:39 #23 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MCC..... Media type ID: 004 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8 23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 13:07:39 #24 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 13:07:52 #25 TRANSFER -25 File Reader.cpp, Line 364 Error reading data 13:07:52 #26 Text 0 File Reader.cpp, Line 367 Exception value: -1 13:07:52 #27 Text 0 File ThreadedTransfer.cpp, Line 234 conversion failed, stopping writers 13:07:53 #28 SPTI -1046 File SCSIPassThrough.cpp, Line 306 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x06 CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 06 13:07:53 #29 Phase 127 File dlgbrnst.cpp, Line 1724 Generating DVD high compatibility borders 13:07:53 #30 Phase 129 File dlgbrnst.cpp, Line 1724 Generating DVD borders completed successfully 13:07:53 #31 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 8x (11.080 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 27/07/2006 19:28:33 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Sounds to me you got the nero software installed in the wrong location should in C:\Program Files\Ahead\Nero StartSmart. not in C:\UTILITIES\Core\ you using the 7.0.0.0 .I use the 6.0.1.8 version ..I believe it is..7 was giving me to much problems check to see if the drive is set (dma)direct memory access not PIO and if your trying to burn disc to disc as..I see you got another dvd rom on your system no nero software will let you do that.You need Transcoder like anydvd or imgburn and clonedvd 2 with anydvd working in the background.I check the specs on your drive and came up with this site http://www.samsung.com/nl/products/odd/dvdwriters/sh_s182m.asp you say u got the external this the internal same model.> I got the old Sh--W162c model ..I dont use it no more to burn movies cause upgrade to a Lite-on Lh-18A1P 18x and Benq LS-DW1655 Dont need sammy no more plus it's not a good quality burner..O Well just go back and uninstall that nero and put in your programs file and see if that works and your burner should be your master not the slave on your ide cable change that around two by switching the pin set on the back of the rom's.i should know .I built Computers in my spare time and work on them..try it see whats happen's let me know by a pm.
You are using two different versions of Nero, you need to pick which one you want and use the clean tools from here ~ http://www.nero.com/enu/downloads-cleantools.html ~ then run Ccleaner, reboot and reinstall the version of your choice. Both versions you are using are ancient. Nero 6.6.0.18 ~ Package 1: http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe Package 2: http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe Update Nero 7 ~ http://www.nero.com/enu/downloads-nero7-update.php Your firmware is the latest according to the Samsung website ~ http://www.samsungodd.com/eng/ The top log shows you using I would suggest Verbatims as you are using in your second log. Slow your burn speed down to no less than 8X, as in your second log, and no more than 12X. You are using DVD Shrink and it doesn't spit out any kind of error? Try ripping to your HDD first using DVDFab HD Decrypter and then continue with DVD Shrink and see if you get any joy.
Thank you guys for all your suggestions, but it didnt seem to work. LOCOENG, I just tried all what you said: 1. Got rid of one of the nero versions (6XXX) 2. Used the nero cleaning tool and then ccleaner 3. Reinstalled nero 7 and relocated to proper folder (progam files) 4. Tried to update nero 7 from the page you gave me but failed (some redundancy error came up, you know why?) 5. Used Verbatims DVDs (ID: MCC) as you mentioned 6. Slowed down burning speed to 12x Plus, DVDShrink shows no errors at all. The problem turns up solely while burning. Remember that I have a laptop and an external burner (samsung), and this burning problem appeared a couple of months ago with no apparent reason. Below, my last burning log from a failed attempt (which actually got to 12% of the movie burned): Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Archivos de programa\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 25/09/2005 19:11:20 NT-SPTI used Nero Version: 7.0.0.0 Recorder: <TSSTcorp CD/DVDW SH-S182M>Version: SB05 - HA 1 TA 1 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: CD-ROM: <TOSHIBA DVD-ROM SD-R6112>Version: 1332 - HA 1 TA 0 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST910021A atapi Port 0 ID 0 DMA: On CdRomPeripheral : TOSHIBA DVD-ROM SD-R6112 atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === TOSHIBA DVD-ROM SD-R6112 D: CDRom0 TSSTcorp CD/DVDW SH-S182M E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 72351744 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 494MB (506672kB) Free physical memory: 59MB (60880kB) Memory in use : 87 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 15.10.2007 UDF/ISO compilation 21:59:52 #1 Phase 112 File dlgbrnst.cpp, Line 1724 DVD-Video files reallocation started 21:59:52 #2 Phase 114 File dlgbrnst.cpp, Line 1724 DVD-Video files reallocation completed (no file modified) 21:59:52 #3 Text 0 File Isodoc.cpp, Line 6410 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : UDF/ISO bridge UDF Revision : 1.02 UDF Partition Type : physical ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660 ;1 file extensions : TRUE 21:59:52 #4 Phase 111 File dlgbrnst.cpp, Line 1724 DVD-Video files sorted 21:59:52 #5 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 262144KB of Memory 21:59:52 #6 Text 0 File Reader.cpp, Line 124 Reader running 21:59:52 #7 Text 0 File Writer.cpp, Line 113 Writer E: TSSTcorp CD/DVDW SH-S182M running 21:59:52 #8 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 21:59:52 #9 ISO9660GEN -11 File Geniso.cpp, Line 3304 First writeable address = 0 (0x00000000) 21:59:52 #10 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 21:59:53 #11 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2263823 (503:04.23, 4421MB) 21:59:53 #12 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 21:59:53 #13 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: TSSTcorp CD/DVDW SH-S182M, Media type: DVD+R Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 21:59:53 #14 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 21:59:53 #15 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2263824 (2263824) = #2263824/503:4.24 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263824 blocks [E: TSSTcorp CD/DVDW SH-S182M] -------------------------------------------------------------- 21:59:53 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [E: TSSTcorp CD/DVDW SH-S182M] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4636311552, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2263824 | lead-out | 1 | 0x41 | 0x00 21:59:53 #17 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 21:59:54 #18 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 21:59:54 #19 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 21:59:54 #20 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 21:59:54 #21 Phase 36 File dlgbrnst.cpp, Line 1724 Burn process started at 12x (16.620 KB/s) 21:59:54 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 306 CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 Buffer x04e6e000: Len x4000 21:59:54 #23 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 21:59:54 #24 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MCC..... Media type ID: 004 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8 23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:59:54 #25 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MCC..... Media type ID: 004 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8 23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:59:54 #26 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: MCC..... Media type ID: 004 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8 23 54 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #T.............. 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 21:59:54 #27 Text 0 File DVDR.cpp, Line 6938 Drive: TSSTcorp CD/DVDW SH-S182M Book Type request [TSST]: DVD-ROM Changing the Book Type was finished successfully, return code 0 21:59:54 #28 CDR -1207 File DVDR.cpp, Line 5211 Book Type automatically set to: DVD-ROM 21:59:54 #29 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 22:01:39 #30 TRANSFER -25 File Reader.cpp, Line 364 Error reading data 22:01:39 #31 Text 0 File Reader.cpp, Line 367 Exception value: -1 22:01:39 #32 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 22:02:02 #33 Phase 127 File dlgbrnst.cpp, Line 1724 Generating DVD high compatibility borders 22:02:02 #34 Phase 129 File dlgbrnst.cpp, Line 1724 Generating DVD borders completed successfully 22:02:02 #35 Phase 38 File dlgbrnst.cpp, Line 1724 Burn process failed at 12x (16.620 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 27/07/2006 19:28:33 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
