i had abut 5 playstation images and i was putting them on dvd+rs and nowwhen i click on them it says that i need to insert a dvd-r. i didnt have any problems with the other ones
well i got it to write to a dvd+r but got an error at end disc.heres log Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.9.6.0 Internal Version: 7, 9, 6, 0 Recorder: <DVDRW USB 16X> Version: A079 - HA 1 TA 2 - 7.9.6.0 Adapter driver: <USB 1.0> HA 1 Drive buffer : 2048kB Bus Type : set to ATAPI (3) -> ATAPI, detected: ? CD-ROM: <DVDRW IDE1004 >Version: 0039 - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: On CdRomPeripheral : DVDRW IDE1004 atapi Port 1 ID 0 DMA: On CdRomPeripheral : SONY CD-RW CRX175E atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === DVDRW IDE1004 F: CdRom0 SONY CD-RW CRX175E G: CdRom1 DVDRW USB 16X H: CdRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523808kB) Free physical memory: 199MB (204104kB) Memory in use : 61 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.10.2007 Burn DVD Image 12:34:34 AM #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 12:34:35 AM #2 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 12:34:35 AM #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 1212495 (269:26.45, 2368MB) 12:34:35 AM #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 12:34:35 AM #5 Text 0 File DlgWaitCD.cpp, Line 2964 Recorder: DVDRW USB 16X, Media type: DVD+R Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 7 12:34:35 AM #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 12:34:35 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 1212496 (1212496) = #1212496/269:26.46 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1212496 blocks [H: DVDRW USB 16X] -------------------------------------------------------------- 12:34:35 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [H: DVDRW USB 16X] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2483191808, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1212496 | 1212496 | 0x00 1212496 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 12:34:35 AM #9 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 12:34:35 AM #10 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 12:34:35 AM #11 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 12:34:35 AM #12 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 12:34:35 AM #13 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 12:34:35 AM #14 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 4x (5,540 KB/s) 12:36:45 AM #15 SPTI -600 File SCSIPassThrough.cpp, Line 179 CdRom2: SCSIStatus(x00) WinError(121) NeroError(-600) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0xAD 00 00 00 00 00 00 FF 40 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x06563ac0: Len x4000 12:36:46 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 12:36:46 AM #17 Text 0 File DVDR.cpp, Line 3225 Recording mode: unknown Recording Mode 12:36:46 AM #18 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 12:36:46 AM #19 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 7 h Disc Manufacturer ID: CMC.MAG. Media type ID: M01 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8 23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb...... 01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................ 12:36:46 AM #20 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 74390400 12:51:20 AM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 179 CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1135) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x0C Sense Qual: 0x00 CDB Data: 0x2A 00 00 01 2F E0 00 00 20 00 00 00 Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C Buffer x08132900: Len x10000 0xDA DE B6 36 FE B6 15 18 5C 75 B5 D5 59 D4 00 CD 0x7B 45 CB FE 2D B5 68 1E 03 47 5F B8 20 7C 02 9E 0x65 DD 79 05 D1 AB 5D C9 BB AC 61 92 A8 5D DB 49 12:51:20 AM #22 CDR -1135 File Writer.cpp, Line 303 Write error H: DVDRW USB 16X 12:51:20 AM #23 Text 0 File DVDR.cpp, Line 3783 EndDAO: Last written address was 77791 (12FDFh) 12:51:20 AM #24 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 4x (5,540 KB/s) 12:51:21 AM #25 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 12:51:35 AM #26 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 12:51:35 AM #27 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Basically the only thing I can see is this These are poor quality discs, try Verbatim or Sony (made in Japan)
