I am new to DVD burning. I used dvd shrink (i think properly) and saved the movie to my harddrive. I have nero and tried to use that to burn it to a dvd-r and it gives me an error message. I am burning at 4x and below is a copy of the error log. I have been fiddling for about 2 days and I think I have ruined about 10 or 20 dvd-r's trying it. I hope someone can help me. Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56 AM ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 PM Nero version: 6.6.0.2 (Nero Express) Recorder: <SONY DVD RW DRU-720A> Version: JY02 - HA 1 TA 0 - 6.6.0.2 Adapter driver: <atapi> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <HL-DT-ST DVD-ROM GDR8160B>Version: 0009 - HA 1 TA 1 - 6.6.0.2 Adapter driver: <atapi> HA 1 === Scsi-Device-Map === DiskPeripheral : IC35L060AVVA07-0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVD-ROM GDR8160B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === SONY DVD RW DRU-720A D: CDRom0 HL-DT-ST DVD-ROM GDR8160 E: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 766MB (785136kB) Free physical memory: 168MB (172184kB) Memory in use : 78 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 26.5.2005 UDF/ISO compilation 5:59:36 PM #1 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 907 Required file 'VIDEO_TS.IFO' is not present 5:59:36 PM #2 DVDREALLOC -21 File DVDVideoCompilation.cpp, Line 907 Required file 'VIDEO_TS.BUP' is not present 5:59:36 PM #3 Phase 117 File dlgbrnst.cpp, Line 1832 DVD-Video files compliance test failed 5:59:42 PM #4 Phase 132 File dlgbrnst.cpp, Line 1832 DVD-Video files compliance ignored 5:59:42 PM #5 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : FALSE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet :FALSE Allow pathdepth more than 8 directories : FALSE Allow more than 255 characters in path : FALSE Write ISO9660 ;1 file extensions : TRUE 5:59:42 PM #6 Phase 111 File dlgbrnst.cpp, Line 1832 DVD-Video files sorted 5:59:42 PM #7 Text 0 File Reader.cpp, Line 127 Reader running 5:59:42 PM #8 Text 0 File Writer.cpp, Line 122 Writer SONY DVD RW DRU-720A running 5:59:42 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 5:59:44 PM #10 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 5:59:46 PM #11 Text 0 File Burncd.cpp, Line 3117 Turn on Disc-at-once, using DVD media 6:00:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 256 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 524815 (116:37.40, 1025MB) 6:00:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 268 Write in overburning mode: NO (enabled: CD) 6:00:20 PM #14 Text 0 File DlgWaitCD.cpp, Line 2309 Recorder: SONY DVD RW DRU-720A, Media type: DVD-R Disc Manufacturer: MXL RG - 02 Disc Application Code: 64, Disc Physical Code: 193 6:00:20 PM #15 Text 0 File DlgWaitCD.cpp, Line 430 >>> Protocol of DlgWaitCD activities: <<< ========================================= Disc not empty. Insert empty disc. (Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R9 Double Layer.) 6:00:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 844 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 524816 (524816) = #524816/116:37.41 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 524816 blocks [SONY DVD RW DRU-720A] -------------------------------------------------------------- 6:00:20 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1047 Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1074823168, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 524816 | lead-out | 1 | 0x00 | 0x41 6:00:20 PM #18 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 6:00:20 PM #19 Text 0 File Burncd.cpp, Line 4004 Cache writing successful. 6:00:20 PM #20 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 6:00:20 PM #21 Phase 32 File dlgbrnst.cpp, Line 1832 Simulation started at 4x (5,540 KB/s) 6:00:20 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2568 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 6:00:20 PM #23 Text 0 File DVDR.cpp, Line 2202 Recording mode: Sequential Recording Mode 6:00:20 PM #24 Text 0 File Mmc.cpp, Line 20869 Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON 6:00:20 PM #25 Text 0 File DVDR.cpp, Line 2343 Start write address at LBA 0 DVD high compatibility mode: Yes 6:00:20 PM #26 Text 0 File Cdrdrv.cpp, Line 8310 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 5 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 6:00:20 PM #27 CDR -1207 File DVDR.cpp, Line 4780 Book Type automatically set to: Current recorder setting 6:00:23 PM #28 Text 0 File Cdrdrv.cpp, Line 1283 18:00:23.343 - SONY DVD RW DRU-720A\H1 T0 : Queue again later 6:00:47 PM #29 SCSI -1024 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x044D0000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x04 (KEY_HARDWARE_ERROR) Sense Code: 0x08 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x01 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x08 0x03 6:00:47 PM #30 CDR -1024 File Writer.cpp, Line 311 Communication failure 6:00:47 PM #31 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 6:00:47 PM #32 Text 0 File ThreadedTransfer.cpp, Line 223 conversion idle, stopping reader 6:00:47 PM #33 Text 0 File DVDR.cpp, Line 2586 EndDAO: Last written address was 287 6:04:13 PM #34 Phase 34 File dlgbrnst.cpp, Line 1832 Simulation failed at 4x (5,540 KB/s) Existing drivers: File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02 AM File 'Drivers\InCDfs.SYS': Ver=4, 3, 7, 3, size=98176 bytes, created 26/11/2004 1:36:24 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDpass.SYS': Ver=4, 3, 7, 3, size=28928 bytes, created 26/11/2004 1:36:06 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\InCDrec.SYS': Ver=4, 3, 7, 3, size=7808 bytes, created 26/11/2004 1:36:26 PM (InCD4 driver for win NT/2K/XP) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 04/08/2004 1:59:42 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Hi there, I'm no expert but here goes: Recorder: <SONY DVD RW DRU-720A> Version: JY02 You have firmware JY02, and JY03 has been released: http://sony.storagesupport.com/dvdrw/firmware.htm#720 Firmware Upgrade JY03 (Date: 4/19/05) DRU-720A | DRX-720UL Improvements: Writing performance and reliability improvements. It seems to have recognised the media which is a good thing... Does your burner support 2x ? Try 2x and see if it makes a difference. 4x maybe a little fast, since you are using lots of memory ! Also, Lots of people are having burning issued with InCD installed/running. Try without InCD ! DMA is ON on all devices, that's what we want !
