HELP! Don't know which processor to buy???

Discussion in 'PC hardware help' started by Shaun2209, Dec 20, 2004.

Page 1 of 2
  1. Shaun2209

    Shaun2209 Guest

    Don't know much about upgrading PC's, so I'll try to explain as best I can.

    I'm looking to upgrade the present processor I have in my PC which is a Intel Celeron 1.7GHz. I was looking at maybe a Celeron 2.4 or 2.6.

    The motherboard I have is a IM845GL, if that means anything to anybody. The book states it will take an "Intel Pentium 4 Processor in the mPGA 478 pin package". This doesn't mean much to me.

    What I'd appreciate knowing is which chip should I buy. I realise the Pentium 4 is a better chip than the Celeron, but I'm lost as to which chip I should buy.

    I've seen loads of Celeron chips for sale on ebay, but the description always states, make sure it is the correct chip for your motherboard, as there is no refunds. I just don't want to go and buy a chip that might not work.

    Any advice would be greatly appreciated.

    Thanks.
     
    Shaun2209, Dec 20, 2004
    #1
  2. wild77

    wild77 Guest

    What brand computer do you have?The IM845GL refers to the chipset on your motherboard http://www.intel.com/design/chipsets/845gl/?iid=search&
    As for a processor I would not buy on E Bay!Also before buying you should really find out the maker of your motherboard.Different boards support different speed CPU's depending on the BIOS.Check out these links http://www.newegg.com/app/ViewProductDesc.asp?description=19-116-188&depa=0
    http://www.newegg.com/app/ViewProductDesc.asp?description=19-116-188&depa=0
    Do some more research before buying it will save you a lot of Headaches.
     
    wild77, Dec 20, 2004
    #2
  3. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,168
    Likes Received:
    136
    Trophy Points:
    143
    also check for bios update as board might not run newer chip, ran into that when trying 2.4 celeron d while i have c version that works but d version doesn't post
     
    ddp, Dec 20, 2004
    #3
  4. Shaun2209

    Shaun2209 Guest

    Thanks for your replies guys and the links wild77. Trouble is, I'm more confused than ever now. I was hoping it was just a case of taking the 1.7 out and replacing it with either the 2.4 or the 2.6. Seems not.

    Thanks anyway.
     
    Shaun2209, Dec 20, 2004
    #4
  5. Shaun2209

    Shaun2209 Guest

    Can anyone tell me how I can found out the maker of the motherboard on my PC.

    I've got the user guide for the board, but all it says on the cover is IM845GL Motherboard. Can't find anything inside it either.
     
    Shaun2209, Dec 20, 2004
    #5
  6. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,168
    Likes Received:
    136
    Trophy Points:
    143
    there is no info printed on motherboard like mine has p4vxasd2+ printed on it. is computer a name brand or a clone
     
    ddp, Dec 20, 2004
    #6
  7. Shaun2209

    Shaun2209 Guest

    Hi ddp,

    Its an emachine. So I expect its a clone as its not a brand name.
     
    Shaun2209, Dec 20, 2004
    #7
  8. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,168
    Likes Received:
    136
    Trophy Points:
    143
    its a name brand just a low end at that. what is model # on tower so can see if get info on motherboard
     
    ddp, Dec 20, 2004
    #8
  9. Shaun2209

    Shaun2209 Guest

    emachine 270. Hope that helps.
     
    Shaun2209, Dec 20, 2004
    #9
  10. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,168
    Likes Received:
    136
    Trophy Points:
    143
    is it emonster or what as they have 9 categories for desktop
     
    ddp, Dec 20, 2004
    #10
  11. Shaun2209

    Shaun2209 Guest

    I'm just looking at the front of the tower and all it says is emachine 270. Should I be looking elsewhere?
     
    Shaun2209, Dec 20, 2004
    #11
  12. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,168
    Likes Received:
    136
    Trophy Points:
    143
    see if on backside of machine near psu???
     
    ddp, Dec 20, 2004
    #12
  13. Shaun2209

    Shaun2209 Guest

    There is a plate on the back of the PC. For Model No it says Emachine 270. The PC is nearly 3 years old so I'm wondering if they list it anymore.
     
    Shaun2209, Dec 20, 2004
    #13
  14. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,168
    Likes Received:
    136
    Trophy Points:
    143
    does it have a series # like 2742, 2778 or 2792
     
    ddp, Dec 20, 2004
    #14
  15. Shaun2209

    Shaun2209 Guest

    I've searched the front and back. Can't find no mention of a series number. Not much help am I?
     
    Shaun2209, Dec 20, 2004
    #15
  16. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,168
    Likes Received:
    136
    Trophy Points:
    143
    does the manual mention a series
     
    ddp, Dec 20, 2004
    #16
  17. Shaun2209

    Shaun2209 Guest

    I found a web-site which supports the eMachine 270. It seems to have an Imperial Motherboard though I don't know which one yet as there are several.

    Have you heard of this board?
     
    Shaun2209, Dec 20, 2004
    #17
  18. Shaun2209

    Shaun2209 Guest

    Apparently it only supports these processors:


    1.3 400MHz 256KB
    1.4 400MHz 256KB
    1.5 400MHz 256KB
    1.6 400MHz 256KB
    1.7 400MHz 256KB
    1.8 400MHz 256KB
    1.9 400MHz 256KB
    2.0 400MHz 256KB

    Might be time to buy another board. But which one? What boards will fit my case? Its so complicated.
     
    Shaun2209, Dec 20, 2004
    #18
  19. ddp

    ddp Moderator Staff Member

    Joined:
    Oct 15, 2004
    Messages:
    39,168
    Likes Received:
    136
    Trophy Points:
    143
    suggest get a new case that is expandable that is as cheap as $29Can with 350watt psu & 2 usb in front. gut out emachine for floppy, hd, cd/dvdrom drives, ram(maybe if fit new board) & cards & put into new board & case, than sell off emachine or keep for just in case
     
    ddp, Dec 20, 2004
    #19
  20. Shaun2209

    Shaun2209 Guest

    Can you buy a case that already has a motherboard in it or do you have to buy them seperatly?
     
    Shaun2209, Dec 20, 2004
    #20
Page 1 of 2

Share This Page