Hi, would appreciate any help as my clone Starview box is dead, I know you're all thinking it needs jtagging but I did that successfully a few month ago after loading firmware 3.00. I reloaded with clone friendly 2.57 and all has been ok until this week. Was watching it ok on Tuesday morning and the unit was off when I returned home in the afternoon. Have tried Jtagging as previously to no avail, PSU appears to be ok but no LED or signal???
Have you just done a visual inspection of the PSU or have you tried to take voltage readings from it?
Yes I've checked the voltages from the PSU to the main board (3.3,12,23 & 7 volts) and all are just below the values written on the board, so I presume the PSU is ok. Thanks for your reply, JewJew
Sounds fine have you checked the svideo board also. Does sound strange though that you dont even have any LEDs on the display.
