Hello people, fist let me apologise for what im about to do. I've only just joined this forum and its for the selfish reason that my DVd burner has simply stopped working all of a sudden and this is pretty much the only thing i haven't tried to get it working. Im using neuro professional to try and mount some .iso of a few DVDs i burnt using DVD shrink. Im using memorex DVD-R x16 4.7gig/120min media on my NEC+/-6500A drive. Until now its always worked fine. Ive tried a couple of different brands of DVD and two or three programs too and everytime I try to burn it comes up with this message: 1C82-0000-19E5-MAAX-4006-0491-**** Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM NT-SPTI used Nero Version: 7.5.7.0 Internal Version: 7, 5, 7, 0 Recorder: <_NEC DVD+-RW ND-6500A> Version: 2.40 - HA 1 TA 2 - 7.5.7.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <_NEC DVD+-RW ND-6500A>Version: 2.40 - HA 1 TA 2 - 7.5.7.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST9808210A atapi Port 0 ID 0 DMA: On CdRomPeripheral : _NEC DVD+-RW ND-6500A atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === _NEC DVD+-RW ND-6500A D: CDRom2 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte BUFE : 0 Physical memory : 511MB (523632kB) Free physical memory: 151MB (154732kB) Memory in use : 70 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 11.3.2007 Burn DVD Image 8:19:14 PM #1 Text 0 File SCSIPassThrough.cpp, Line 583 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 8:19:14 PM #2 Text 0 File Burncd.cpp, Line 3435 Turn on Disc-At-Once, using DVD media 8:19:15 PM #3 Text 0 File DlgWaitCD.cpp, Line 301 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2206579 (490:21.04, 4309MB) 8:19:15 PM #4 Text 0 File DlgWaitCD.cpp, Line 313 Write in overburning mode: NO 8:19:15 PM #5 Text 0 File DlgWaitCD.cpp, Line 2863 Recorder: _NEC DVD+-RW ND-6500A, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 8:19:15 PM #6 Text 0 File DlgWaitCD.cpp, Line 485 >>> Protocol of DlgWaitCD activities: <<< ========================================= 8:19:15 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 820 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2206580 (2206580) = #2206580/490:21.5 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2206430 blocks [Main] -------------------------------------------------------------- 8:19:15 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1033 Prepare recorder [_NEC DVD+-RW ND-6500A] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4519075840, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 2206580 | 2206430 | 0x00 0 | 1 | 1 | 0x41 | 2206580 | 2206430 | 0x00 2206580 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 8:19:15 PM #9 Text 0 File SCSIPassThrough.cpp, Line 41 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 8:19:15 PM #10 Phase 24 File dlgbrnst.cpp, Line 1746 Caching of files started 8:19:15 PM #11 Text 0 File Burncd.cpp, Line 4262 Cache writing successful. 8:19:15 PM #12 Phase 25 File dlgbrnst.cpp, Line 1746 Caching of files completed 8:19:15 PM #13 Phase 36 File dlgbrnst.cpp, Line 1746 Burn process started at 2.4x (3,324 KB/s) 8:19:15 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2730 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 8:19:15 PM #15 Text 0 File DVDR.cpp, Line 3026 Recording mode: Sequential Recording Mode 8:19:15 PM #16 Text 0 File DVDR.cpp, Line 3182 Start write address at LBA 0 DVD high compatibility mode: Yes 8:19:15 PM #17 Text 0 File Cdrdrv.cpp, Line 9234 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26127F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 2FE10 h Start sector number of the next Border-In: 2FFA0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 8:19:15 PM #18 SPTI -1046 File SCSIPassThrough.cpp, Line 293 D: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1046) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x30 Sense Qual: 0x05 CDB Data: 0x53 00 00 00 00 00 21 AB 80 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05 8:19:15 PM #19 CDR -1046 File ThreadedTransferInterface.cpp, Line 1780 Illegal disc D: _NEC DVD+-RW ND-6500A 8:19:15 PM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1780 Could not perform start of Disc-at-once 8:19:15 PM #21 Phase 38 File dlgbrnst.cpp, Line 1746 Burn process failed at 2.4x (3,324 KB/s) 8:19:15 PM #22 Text 0 File Cdrdrv.cpp, Line 10459 DriveLocker: UnLockVolume completed 8:19:15 PM #23 Text 0 File SCSIPassThrough.cpp, Line 583 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 3:47:00 AM File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 3:47:00 AM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) I woul be really greatful if someone can check this out and hopefully solve my problem. Many thanks Andy
Hi Subhuman What other discs have you tried? The memorex you're using are made by CMC - not very good at all. The illegal disc error usually means that the discs are not supported by the firmware. The firmware on this drive is from 2004 so newer media may cause it problems. You might want to try some patched firmware from liggy & dees - 2 newer ones for this drive are 2.58 or 2.81 which are newer than the 2.40 version. Have you tried another 8x media or say Verbatim on this drive? That's another option. File 'Drivers\CDRALW2K.SYS Roxio and Nero don't always play well. So if still failing uninstall Roxio and run the zap tool. edit: link for liggy & dees
Cheers. Ok so ill go get me some better DVDs tomorrow and give them a whirl to see if its just crappy media thats jacked it up. i downloaded the patch, though i must admit i have no idea what to do with this .bin file now (computor novice) thought i had best let yo know that it still burns audio CDs perfectly fine... could this idicate anything? SH
You can try different media 1st and see how that goes. Since the firmware is from 2004 newer 16x media may be hit or miss on the drive. If you can find 8x media that would be better. The patched firmware maywork. You'll need binflash for the bin file. Heere's a guide w/ a link to download - link CD's still burning - CD's have been around much longer then DVD's so usuallythe firmware has much more support for all the different manufacturers.
