Please view this logfile and let me know if you have any ideas? I can't copy a dvd or write one from ISO file.. Thanks for your time!! Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/17/2003 2:18:04 PM Nero version: 6.3.0.2 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4166B>Version: 1I24 - HA 0 TA 0 - 6.3.0.2 Adapter driver: <atapi> HA 0 Drive buffer : 2048kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: Std. MMC recorder CD-ROM: <ASUS DVD-E616P3H >Version: 1.04 - HA 0 TA 1 - 6.3.0.2 Adapter driver: <atapi> HA 0 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4166B atapi Port 0 ID 0 DMA: Off CdRomPeripheral : ASUS DVD-E616P3H atapi Port 0 ID 1 DMA: On DiskPeripheral : ST3250823AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4166 E: CDRom0 ASUS DVD-E616P3H F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: CmdQueuing : 1 CmdNotification: 2 WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 EraseSpeed : 0 BUFE : 0 Physical memory : 1014MB (1038764kB) Free physical memory: 567MB (581004kB) Memory in use : 44 % Uncached PFiles: 0x0 Use Static Write Speed Table: 0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 6.7.2007 DVD-Copy on the fly 4:51:24 PM #1 Text 0 File Reader.cpp, Line 118 Reader running 4:51:24 PM #2 Text 0 File Writer.cpp, Line 124 Writer HL-DT-ST DVDRRW GWA-4166B running 4:51:24 PM #3 Text 0 File DVDCopy.cpp, Line 241 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2286032 (gap 0) Blank 0 Res 0 Mode TRM_DATA_MODE1 (0) 4:51:24 PM #4 Text 0 File DVDCopy.cpp, Line 334 Max -1 tracks of 1 allowed to copy 1: 0 - 2286032 = 2286032, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 4:51:24 PM #5 Text 0 File Burncd.cpp, Line 3101 Turn on Disc-at-once, using DVD media 4:51:24 PM #6 Text 0 File DlgWaitCD.cpp, Line 240 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286031 (508:00.31, 4464MB) 4:51:24 PM #7 Text 0 File DlgWaitCD.cpp, Line 245 Write in overburning mode: FALSE 4:51:24 PM #8 Text 0 File DlgWaitCD.cpp, Line 2085 Recorder: HL-DT-ST DVDRRW GWA-4166B, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 4:51:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 406 >>> Protocol of DlgWaitCD activities: <<< ========================================= 4:51:24 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 779 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2286032 (2286032) = #2286032/508:0.32 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286032 blocks [HL-DT-ST DVDRRW GWA-4166B] -------------------------------------------------------------- 4:51:24 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 948 Prepare recorder [HL-DT-ST DVDRRW GWA-4166B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681793536, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_ 0 | lead-in | 0 | 0x00 | 0x41 0 | 1 | 0 | 0x00 | 0x41 0 | 1 | 1 | 0x00 | 0x41 2286032 | lead-out | 1 | 0x00 | 0x41 4:51:24 PM #12 Phase 36 File dlgbrnst.cpp, Line 1800 Burn process started at 4x (5,520 KB/s) 4:51:24 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 2264 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 4:51:24 PM #14 Text 0 File Cdrdrv.cpp, Line 7941 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h Data in Burst Cutting Area (BCA) does not exist Media Specific: 00 03 59 55 44 45 4E 30 - 30 30 54 30 32 00 38 23 ..YUDEN000T02.8# 54 37 10 02 4E 72 02 8C - 63 16 16 0B 0B 0A 0A 01 T7..Nr..c....... 19 1B 0C 0C 0C 0D 01 00 - 00 00 00 00 00 00 00 01 ................ 4:51:24 PM #15 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 14:17,638 (857638ms) -> OK 4:51:24 PM #16 Text 0 File DVDPlusRW.cpp, Line 564 Start write address at LBA 0 DVD high compatibility mode: Yes 4:58:26 PM #17 SCSI -1128 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x09562000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x02 0x45 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 4:58:27 PM #18 SCSI -1128 File Cdrdrv.cpp, Line 1431 SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x09562000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x05 CDB Data: 0x28 0x00 0x00 0x02 0x45 0xA0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A 0x00 0x00 0x00 0x00 0x11 0x05 4:58:27 PM #19 TRANSFER -25 File Reader.cpp, Line 371 Error reading data 5:01:39 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229 all writers idle, stopping conversion 5:02:41 PM #21 Phase 127 File dlgbrnst.cpp, Line 1800 Generating DVD high compatibility borders 5:02:47 PM #22 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 5:02:47 PM #23 Phase 129 File dlgbrnst.cpp, Line 1800 Generating DVD borders completed successfully 5:02:47 PM #24 Text 0 File dlgbrnst.cpp, Line 1658 Set remaining time: 0:00,000 (0ms) -> OK 5:02:47 PM #25 Phase 38 File dlgbrnst.cpp, Line 1800 Burn process failed at 4x (5,520 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for rec) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option
Hi lancenpam Here's a few suggestions: Nero version: 6.3.0.2 Update Nero - package 1 only from this link CdRomPeripheral : HL-DT-ST DVDRRW GWA-4166B atapi Port 0 ID 0 DMA: Off Turn DMA back on for this drive. Here's a guide Error reading data You're getting read errors from the source disc - too many and the drive can keep going down a notch in transfer mode (DMA) until it hits the bottom - the slow PIO mode. Check the back of the disc for dirt, scratches smudges etc. Try cleaning it off with something non abrasive. DVD-Copy on the fly Turn off copy on the fly. Let Nero try and rip the dvd 1st - it will store the files temporarily then start the burn. If it can't read it - turning this off saves a disc being wasted.
it worked - FINALLY and THANK YOU soooo much for the help!!!!!! I have struggled for 2 months and you saved me! Must have needed the pack 1 for the Nero update...WOW...I'm so excited, but ...better burn a couple more before i get too excited..haha...make sure it sticks!!!
You're very welcome lancenpam If you didn't do the other suggestions do them too will help. Happy Burning!
Well, I spoke too soon, I was able to do one successful burn now it's back to burn fails. Tried 8x and 4x. How do you select Burn on the Fly? Here's the latest log file. Thanks again ! Pam Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM NT-SPTI used Nero Version: 6.6.1.15 Internal Version: 6, 6, 1, 15 (Nero Express) Recorder: <HL-DT-ST DVDRRW GWA-4166B>Version: 1I24 - HA 1 TA 0 - 6.6.1.15 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <ASUS DVD-E616P3H >Version: 1.04 - HA 1 TA 1 - 6.6.1.15 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === CdRomPeripheral : HL-DT-ST DVDRRW GWA-4166B atapi Port 0 ID 0 DMA: On CdRomPeripheral : ASUS DVD-E616P3H atapi Port 0 ID 1 DMA: On DiskPeripheral : ST3250823AS atapi Port 1 ID 0 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRRW GWA-4166B E: CDRom0 ASUS DVD-E616P3H F: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 1014MB (1038764kB) Free physical memory: 554MB (567936kB) Memory in use : 45 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 10.7.2007 Burn DVD Image 9:58:48 AM #1 Text 0 File SCSIPTICommands.cpp, Line 403 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 9:58:48 AM #2 Text 0 File Burncd.cpp, Line 3316 Turn on Disc-At-Once, using DVD media 9:58:48 AM #3 Text 0 File DlgWaitCD.cpp, Line 281 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2286013 (508:00.13, 4464MB) 9:58:48 AM #4 Text 0 File DlgWaitCD.cpp, Line 293 Write in overburning mode: NO (enabled: CD) 9:58:48 AM #5 Text 0 File DlgWaitCD.cpp, Line 2616 Recorder: HL-DT-ST DVDRRW GWA-4166B, Media type: DVD+R Disc Manufacturer ID: YUDEN000, Media Type ID: T02, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 9:58:48 AM #6 Text 0 File DlgWaitCD.cpp, Line 459 >>> Protocol of DlgWaitCD activities: <<< ========================================= 9:58:48 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 814 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660) 2 indices, index0 (150) not provided original disc pos #0 + 2286014 (2286014) = #2286014/508:0.14 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286014 blocks [HL-DT-ST DVDRRW GWA-4166B] -------------------------------------------------------------- 9:58:48 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 1013 Prepare recorder [HL-DT-ST DVDRRW GWA-4166B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681756672, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2286014 | lead-out | 1 | 0x41 | 0x00 9:58:48 AM #9 Text 0 File SCSIPTICommands.cpp, Line 208 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 9:58:48 AM #10 Phase 24 File dlgbrnst.cpp, Line 1685 Caching of files started 9:58:48 AM #11 Text 0 File Burncd.cpp, Line 4158 Cache writing successful. 9:58:48 AM #12 Phase 25 File dlgbrnst.cpp, Line 1685 Caching of files completed 9:58:48 AM #13 Phase 36 File dlgbrnst.cpp, Line 1685 Burn process started at 4x (5,540 KB/s) 9:58:48 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2717 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 9:58:48 AM #15 Text 0 File Cdrdrv.cpp, Line 8737 ---- DVD Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1.0x (1) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: YUDEN000 Media type ID: T02 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 59 55 44 45 4E - 30 30 30 54 30 32 00 38 ...YUDEN000T02.8 23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 9:58:48 AM #16 SPTI -1066 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00 Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24 Buffer x07ae0f40: Len x648 9:58:48 AM #17 Text 0 File DVDPlusRW.cpp, Line 666 Start write address at LBA 0 DVD high compatibility mode: Yes 10:02:01 AM #18 SPTI -1093 File SCSIPassThrough.cpp, Line 178 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1093) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x02 Sense Qual: 0x00 CDB Data: 0x2A 00 00 02 72 C0 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 02 Buffer x0c592740: Len x10000 0x00 00 01 BA 44 1B 9F 76 DD 01 01 89 C3 F8 00 00 0x01 E0 07 EC 81 00 00 98 DA 93 5A 80 27 6D 0F 46 0xFA E8 03 7A 08 3F BD EC F4 04 BF FD 6F 93 82 1F 10:02:01 AM #19 CDR -1093 File Writer.cpp, Line 281 No seek complete E: HL-DT-ST DVDRRW GWA-4166B 10:02:01 AM #20 Phase 127 File dlgbrnst.cpp, Line 1685 Generating DVD high compatibility borders 10:02:02 AM #21 Phase 129 File dlgbrnst.cpp, Line 1685 Generating DVD borders completed successfully 10:02:02 AM #22 Phase 38 File dlgbrnst.cpp, Line 1685 Burn process failed at 4x (5,540 KB/s) 10:02:02 AM #23 Text 0 File SCSIPTICommands.cpp, Line 253 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 10:02:08 AM #24 Text 0 File Cdrdrv.cpp, Line 9945 DriveLocker: UnLockVolume completed 10:02:08 AM #25 Text 0 File SCSIPTICommands.cpp, Line 403 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/7/2007 6:51:00 PM (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Dang! Okay here's a couple of suggestions. This time you're getting a No seek complete error. Try cleaning off the lens of the drive with either a dvd lens cleaner or blowing some canned air in it. Try another burning program. Here's a good free one - ImgBurn. For non iso files use the build mode to add the files. Looks like you're burning an iso in this log so use write mode in ImgBurn. Taiyo Yuden is good media but might want to try another brand like Vebratim or made in Japan Sony, Fuji or Maxell to rule out media. The burn on the fly option is available when you're doing a copy to copy. In Express it's called quick copy. Give those a go and let us know. Oh and anything change pc wise since you were last able to burn?
Now I've really done it! The drive won't open now. I blew air in, closed it and now it is stuck....good grief,it's just not meant to be. haha I have in the past used IMGburn and never had luck with it...I always get an I/O error. Nothing has changed on the pc that i know of except my bum drive...ugh
It may just be time to put this one to rest and pick up a new one. Good ones to look at are LiteOn and Pioneer. You can try uninstalling it in device - rebooting and letting windows do it's thing and reinstall - see if that makes a diff. Right click on my computer>properties>hardware tab>device manager. Click on the + next to dvd/cd drives then right on the drive and pick uninstall. Reboot.
The latest excitement here in kansas city --- Since the DVD-RW drive was not showing up in device manager, I thought perhaps there was a loose connection. I took the media center apart, pulled out the disk drive that is having problems, cleaned out the dust, put the drive back in, making sure all is plugged in tight. I opened device manager and wah la... both drives are listed and in the correct form - one dvd - rw and one cd-rom. After jumping up and down and feeling very proud that i accomplished such a geeky task, all by myself, I was ready to roll, yet again. The drive has no power now... the light will not come on in the front, the power light and the drive will not open. How can it not have power yet be listed on device manager as active and in the property section say "the device is working properly"??? Thanks again for any advice you can provide Pam
The cleaning may just be what it needed. The drive is showing up cause it's hooked up to the ide cable - but it sounds like you forgot to connect it back to the power connector from the power supply So open it back up and connect this part. edit - typo
Well,I sure hope i'm not that crazy to miss a power cable. I carefully checked what was plugged into the drive before I removed it. There was a white plastic 4 pin connector ( I think thats power, right)? And the long connector that attaches to the strip of ribbon. Are those the only 2 connectors?
Yep those would be the 2. I would still check it just to make sure it's in there securely or even try another power connector just to be sure. I've missed putting them in securely before
The latest... I swapped power supply pins between the 2 drives. The power cable that is in the faulty drive works just fine in my other drive. The good drives cable did not work in my faulty drive. So must be the drive...I dont suppose you can fix anything within a drive huh? need to replace it?
For the price of a new one it's really not worth it trying to fix anything inside imho. You can switching the drives - put the dvd burner on the slave connection and the ASUS on the master connection. Switch the jumper pins on the back to match the setting on the ide cable - master to master etc. If this is a Dell though they prefer cable select and are probably already set to that.
